Attachment 148058 Details for Bug 228699 – Good boot log from 2.6.18-1.2798.fc6 kernel

Good boot log from 2.6.18-1.2798.fc6 kernel

xeon-ok-boot-log.txt (text/plain), 14.41 KB, created by James Morris on 2007-02-14 15:55:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: James Morris

Created: 2007-02-14 15:55:58 UTC

Size: 14.41 KB

patch

obsolete

>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /vmlinuz-2.6.18-1.2798.fc6 ro root=/dev/VolGroup00/LogVol00 selinux=0 au
>dit=1 console=tty0 console=ttyS0,115200
>   [Linux-bzImage, setup=0x1e00, size=0x1b1b3c]
>initrd /initrd-2.6.18-1.2798.fc6.img
>   [Linux-initrd @ 0x37dbe000, 0x231070 bytes]
>
>Linux version 2.6.18-1.2798.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 14:54:20 EDT 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
> BIOS-e820: 000000005fff0000 - 000000005fffec00 (ACPI data)
> BIOS-e820: 000000005fffec00 - 000000005ffff000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>639MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>DMI 2.3 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>Processor #2 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
>Processor #3 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
>ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
>IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 60000000 (gap: 5ffff000:9ec01000)
>Detected 2392.222 MHz processor.
>Built 1 zonelists.  Total pages: 393200
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 selinux=0 audit=1 console=tty0 console=ttyS0,115200
>audit: enabled (after initialization)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1551596k/1572800k available (2105k kernel code, 19824k reserved, 844k data, 240k init, 655296k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4788.30 BogoMIPS (lpj=9576611)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a0000 soft=c0780000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4784.34 BogoMIPS (lpj=9568696)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 2/2 eip 3000
>CPU 2 irqstacks, hard=c07a1000 soft=c0781000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 4784.47 BogoMIPS (lpj=9568946)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 3/3 eip 3000
>CPU 3 irqstacks, hard=c07a2000 soft=c0782000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 4784.52 BogoMIPS (lpj=9569054)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>Total of 4 processors activated (19141.65 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>migration_cost=111,1201
>checking if image is initramfs... it is
>Freeing initrd memory: 2244k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc6ee, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
>ACPI: PCI Root Bridge [PCI1] (0000:01)
>ACPI: PCI Root Bridge [PCI2] (0000:02)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 *5 6 7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 *11 12 14)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0a: ioport range 0x814-0x85b could not be reserved
>pnp: 00:0a: ioport range 0x820-0x83f has been reserved
>pnp: 00:0a: ioport range 0x8a0-0x8af has been reserved
>pnp: 00:0a: ioport range 0xc00-0xcd7 has been reserved
>pnp: 00:0a: ioport range 0xf50-0xf58 has been reserved
>pnp: 00:0a: ioport range 0x800-0x819 could not be reserved
>pnp: 00:0a: ioport range 0x880-0x89f has been reserved
>pnp: 00:0a: ioport range 0x8c0-0x8c3 has been reserved
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (enabled)
>audit(1171467810.852:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key EAA0802BFF323905
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. pci_msi_quirk set.
>PCI: MSI quirk detected. pci_msi_quirk set.
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
>SvrWks CSB5: chipset revision 147
>SvrWks CSB5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x08b0-0x08b7, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x08b8-0x08bf, BIOS settings: hdc:DMA, hdd:pio
>hdc: SONY CD-RW CRX216E, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 240k freed
>Time: tsc clocksource has been installed.
>Write protecting the kernel read-only data: 370k
>Red Hat nash version 5.1.19 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Settinginput: AT Translated Set 2 keyboard as /class/input/input0
> up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>Loading ohci-hcd.ko module
>ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfe100000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Loading ehci-hcd.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading scsi_transport_spi.ko module
>Loading mptbase.ko module
>Fusion MPT base driver 3.04.01
>Copyright (c) 1999-2005 LSI Logic Corporation
>Loading mptscsih.ko module
>Loading mptspi.ko module
>Fusion MPT SPI Host driver 3.04.01
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 29 (level, low) -> IRQ 177
>mptbase: Initiating ioc0 bringup
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>ioc0: 53C1030: Capabilities={Initiator}
>scsi0 : ioc0: LSI53C1030, FwRev=01000c00h, Ports=1, MaxQ=255, IRQ=177
>  Vendor: SEAGATE   Model: ST336732LW        Rev: 2227
>  Type:   Direct-Access                      ANSI SCSI revision: 03
> target0:0:0: Beginning Domain Validation
> target0:0:0: Ending Domain Validation
> target0:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS HMCS (6.25 ns, offset 63)
>SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write through w/ FUA
>SCSI device sda: 71132959 512-byte hdwr sectors (36420 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write through w/ FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>Loading dm-mod.ko module
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  3 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>INIT: version 2.86 booting

Actions: View

Attachments on bug 228699: 148058 | 148059