Attachment 1480685 Details for Bug 1624750 – config.txt

config.txt

config.txt (text/plain), 1.15 KB, created by Alessio on 2018-09-04 07:48:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alessio

Created: 2018-09-04 07:48:51 UTC

Size: 1.15 KB

patch

obsolete

># Raspberry Pi 2
>[pi2]
>kernel=rpi2-u-boot.bin
>
># Raspberry Pi 3
>[pi3]
>kernel=rpi3-u-boot.bin
>
># Default Fedora configs for all Raspberry Pi Revisions
>[all]
>boot_delay=1
>
># New option to allow the firmware to load upstream dtb
># Will allow things like camera, touchscreen etc to work OOTB
>upstream_kernel=1
>
># Without this sdram runs at 400mhz, instead of 450
># https://github.com/Hexxeh/rpi-firmware/issues/172
>audio_pwm_mode=0
>
># Enable UART
># Only enable UART if you're going to use it as it has speed implications
># Serial console is ttyS0 on RPi3 and ttyAMA0 on all other variants
># u-boot will auto detect serial and pass corrent options to kernel if enabled
># Details here on speed https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=141195
># enable_uart=1
>
># This isn't used by mainline VC4 driver so reduce to lowest supported value
>gpu_mem=16
>
># Allow OS rather than firmware control CEC
>mask_gpu_interrupt1=0x100
>
># Other options you can adjust for all Raspberry Pi Revisions
># https://www.raspberrypi.org/documentation/configuration/config-txt/README.md
># All options documented at http://elinux.org/RPiconfig
># for more options see http://elinux.org/RPi_config.txt

Actions: View

Attachments on bug 1624750: 1480680 | 1480684 | 1480685