Attachment 148114 Details for Bug 220470 – Working FC6 kernel boot log, aic7xxx adapter

Working FC6 kernel boot log, aic7xxx adapter

aic7xxx-fc6.txt (text/plain), 15.29 KB, created by Jarod Wilson on 2007-02-15 16:01:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jarod Wilson

Created: 2007-02-15 16:01:44 UTC

Size: 15.29 KB

patch

obsolete

> Linux version 2.6.19-1.2895.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Jan 10 18:32:37 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fffd000 (usable)
> BIOS-e820: 000000003fffd000 - 000000003ffff000 (ACPI data)
> BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6ed0
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262141
>early_node_map[1] active PFN ranges
>    0:        0 ->   262141
>DMI 2.0 present.
>Using APIC driver default
>ASUS P2B-DS detected: force use of acpi=ht
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x01] enabled)
>Processor #1 6:8 APIC version 17
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:8 APIC version 17
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
>I/O APIC #2 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 801.866 MHz processor.
>Built 1 zonelists.  Total pages: 260094
>Kernel command line: ro root=/dev/md0 vga=791 console=tty console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07f6000 soft=c07d6000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1032420k/1048564k available (2177k kernel code, 15392k reserved, 1108k data, 240k init, 131060k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0795000 - 0xc07d1000   ( 240 kB)
>      .data : 0xc0620657 - 0xc07358f4   (1108 kB)
>      .text : 0xc0400000 - 0xc0620657   (2177 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1604.40 BogoMIPS (lpj=802203)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>CPU0: Intel Pentium III (Coppermine) stepping 03
>SMP alternatives: switching to SMP code
>Booting processor 1/0 eip 3000
>CPU 1 irqstacks, hard=c07f7000 soft=c07d7000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 1603.40 BogoMIPS (lpj=801704)
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Pentium III (Coppermine) stepping 03
>Total of 2 processors activated (3207.81 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=1949
>checking if image is initramfs... it is
>Freeing initrd memory: 1619k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0730, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
>* this clock source is slow. Consider trying other clock sources
>PCI quirk: region e400-e43f claimed by PIIX4 ACPI
>PCI quirk: region e800-e80f claimed by PIIX4 SMB
>PIIX4 devres B PIO at 0290-0297
>PCI: Using IRQ router PIIX/ICH [8086/7110] at 0000:00:04.0
>PCI->APIC IRQ transform: 0000:00:04.2[D] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:06.0[A] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:09.0[A] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:09.2[B] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:0b.0[A] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:0c.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: d7000000-d7dfffff
>  PREFETCH window: d7f00000-e5ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x46 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1171554308.491:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5FA3A1EB952EC724
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>vesafb: framebuffer at 0xd8000000, mapped to 0xf8880000, using 3072k, total 65536k
>vesafb: mode is 1024x768x16, linelength=2048, pages=41
>vesafb: protected mode interface info at c000:5336
>vesafb: pmi: set display start = c00c53ca, set palette = c00c5416
>vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 32M @ 0xe6000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:04.1
>PCI: Enabling device 0000:00:04.1 (0000 -> 0001)
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>PIIX4: neither IDE port enabled (BIOS)
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>input: AT Translated Set 2 keyboard as /class/input/input0
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 400k
>Red Hat nash version 5.1.19.0.2 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>uhci_hcd 0000:00:04.2: UHCI Host Controller
>uhci_hcd 0000:00:04.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:04.2: irq 19, io base 0x0000b400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading raid1.ko module
>md: raid1 personality registered for level 1
>Loading xor.ko module
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  1612.000 MB/sec
>raid5: using function: pIII_sse (1612.000 MB/sec)
>Loading raid456.ko module
>raid6: int32x1    218 MB/s
>raid6: int32x2    253 MB/s
>raid6: int32x4    246 MB/s
>raid6: int32x8    226 MB/s
>raid6: mmxx1      730 MB/s
>raid6: mmxx2      820 MB/s
>raid6: sse1x1     636 MB/s
>raid6: sse1x2     847 MB/s
>raid6: using algorithm sse1x2 (847 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading scsi_transport_spi.ko module
>Loading aic7xxx.ko module
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec aic7890/91 Ultra2 SCSI adapter>
>        aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
>
>scsi 0:0:0:0: Direct-Access     ZJCS     ZJCS2-36GB       S5BS PQ: 0 ANSI: 3
>scsi0:A:0:0: Tagged Queuing enabled.  Depth 4
> target0:0:0: Beginning Domain Validation
> target0:0:0: wide asynchronous
> target0:0:0: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 63)
> target0:0:0: Domain Validation skipping write tests
> target0:0:0: Ending Domain Validation
>SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
>SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
>sda: Write Protect is off
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:4:0: CD-ROM            PLEXTOR  CD-R   PX-W8220T 1.00 PQ: 0 ANSI: 2
> target0:0:4: Beginning Domain Validation
> target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
> target0:0:4: Domain Validation skipping write tests
> target0:0:4: Ending Domain Validation
>scsi 0:0:5:0: CD-ROM            TOSHIBA  DVD-ROM SD-M1201 1011 PQ: 0 ANSI: 2
> target0:0:5: Beginning Domain Validation
> target0:0:5: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16)
> target0:0:5: Domain Validation skipping write tests
> target0:0:5: Ending Domain Validation
>scsi 0:0:8:0: Direct-Access     IBM      DDYS-T36950N     S96H PQ: 0 ANSI: 3
>scsi0:A:8:0: Tagged Queuing enabled.  Depth 4
> target0:0:8: Beginning Domain Validation
> target0:0:8: wide asynchronous
> target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 63)
> target0:0:8: Domain Validation skipping write tests
> target0:0:8: Ending Domain Validation
>SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 71687340 512-byte hdwr sectors (36704 MB)
>sdb: Write Protect is off
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>sd 0:0:8:0: Attached scsi disk sdb
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb6 ...
>md:  adding sdb6 ...
>md: sdb5 has different UUID to sdb6
>md: sdb2 has different UUID to sdb6
>md: sdb1 has different UUID to sdb6
>md:  adding sda6 ...
>md: sda5 has different UUID to sdb6
>md: sda2 has different UUID to sdb6
>md: sda1 has different UUID to sdb6
>md: created md3
>md: bind<sda6>
>md: bind<sdb6>
>md: running: <sdb6><sda6>
>md: personality for level 0 is not loaded!
>md: do_md_run() returned -22
>md: md3 stopped.
>md: unbind<sdb6>
>md: export_rdev(sdb6)
>md: unbind<sda6>
>md: export_rdev(sda6)
>md: considering sdb5 ...
>md:  adding sdb5 ...
>md: sdb2 has different UUID to sdb5
>md: sdb1 has different UUID to sdb5
>md:  adding sda5 ...
>md: sda2 has different UUID to sdb5
>md: sda1 has different UUID to sdb5
>md: created md2
>Trying to resume from LABEL=SWAP-sda3
>md: bind<sda5>
>md: bind<sdb5>
>md: running: <sdb5><sda5>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda2 ...
>md: sda1 has different UUID to sdb2
>md: created md0
>md: bind<sda2>
>md: bind<sdb2>
>md: running: <sdb2><sda2>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md1
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>Setting up other filesystems.
>Setting up new root fs
>EXT3-fs: mounted filesystem with ordered data mode.
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1171554332.037:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1634 types, 206 bools, 1 sens, 1024 cats
>security:  59 classes, 51595 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1171554332.615:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>
><and so on to a login prompt>

Actions: View

Attachments on bug 220470: 144195 | 147108 | 147122 | 147123 | 147502 | 147560 | 147613 | 147614 | 147615 | 147622 | 147623 | 147625 | 147626 | 147661 | 148114 | 148115 | 149620