Attachment 148284 Details for Bug 228946 – Kernel dmesg output from 2.6.18-1.2869.fc6.x86_64

Kernel dmesg output from 2.6.18-1.2869.fc6.x86_64

2.6.18-1.2869.fc6-dmesg.txt (text/plain), 22.14 KB, created by Terry Froy on 2007-02-18 11:40:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Terry Froy

Created: 2007-02-18 11:40:57 UTC

Size: 22.14 KB

patch

obsolete

>Bootdata ok (command line is ro root=LABEL=/ rhgb quiet)
>Linux version 2.6.18-1.2869.fc6 (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 14:51:34 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005fff0000 (usable)
> BIOS-e820: 000000005fff0000 - 000000005fff3000 (ACPI NVS)
> BIOS-e820: 000000005fff3000 - 0000000060000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>DMI 2.3 present.
>ACPI: RSDP (v000 Nvidia                                ) @ 0x00000000000f6a60
>ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3000
>ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff3040
>ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000005fff7c40
>ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000005fff0000
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000005fff0000
>On node 0 totalpages: 385737
>  DMA zone: 2712 pages, LIFO batch:0
>  DMA32 zone: 383025 pages, LIFO batch:31
>Nvidia board detected. Ignoring ACPI timer override.
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009e000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
>SMP: Allowing 1 CPUs, 0 hotplug CPUs
>Built 1 zonelists.  Total pages: 385737
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2080.225 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ c0000000 size 256 MB
>Memory: 1537964k/1572800k available (2405k kernel code, 34444k reserved, 1575k data, 204k init)
>Calibrating delay using timer specific routine.. 4161.78 BogoMIPS (lpj=2080894)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 24k freed
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 13001424
>Detected 13.001 MHz APIC timer.
>Brought up 1 CPUs
>testing NMI watchdog ... OK.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=232 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1656k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:03:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: Power Resource [ISAV] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: Setting up Nforce3 AGP.
>agpgart: AGP aperture is 256M @ 0xc0000000
>PCI-DMA: Disabling IOMMU.
>pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:00: ioport range 0x1400-0x147f has been reserved
>pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:00: ioport range 0x1800-0x187f has been reserved
>pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:01:07.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: 9000-cfff
>  MEM window: e5000000-e6ffffff
>  PREFETCH window: e0000000-e1ffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: e2000000-e4ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1171798443.362:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 13A646AEEF086E5B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
>NFORCE3-150: chipset revision 165
>NFORCE3-150: not 100% native mode: will probe irqs later
>NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: ExcelStor Technology J880, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>IT8212: IDE controller at PCI slot 0000:01:0c.0
>ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
>GSI 16 sharing vector 0xB1 and IRQ 16
>ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 177
>IT8212: chipset revision 17
>it821x: controller in smart mode.
>IT8212: 100% native mode on irq 177
>    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>hda: max request size: 512KiB
>hda: 160836480 sectors (82348 MB) w/1719KiB Cache, CHS=16383/255/63, UDMA(133)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3000+ processors (version 2.00.00)
>powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
>powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
>powernow-k8: invalid freq entries 3900000 kHz vs. 65535000 kHz
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x2
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x6
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 204k freed
>Write protecting the kernel read-only data: 461k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
>GSI 17 sharing vector 0xB9 and IRQ 17
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, high) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 185, io mem 0xe7002000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
>GSI 18 sharing vector 0xC1 and IRQ 18
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 21 (level, high) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.1: irq 193, io mem 0xe7003000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
>GSI 19 sharing vector 0xC9 and IRQ 19
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20 (level, high) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 201, io mem 0xe7004000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
>GSI 20 sharing vector 0xD1 and IRQ 20
>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
>ohci_hcd 0000:00:02.1: wakeup
>usb 2-2: new full speed USB device using ohci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>usb 2-3: new full speed USB device using ohci_hcd and address 3
>usb 2-3: configuration #1 chosen from 1 choice
>hub 2-3:1.0: USB hub found
>hub 2-3:1.0: 4 ports detected
>usb 2-3.1: new low speed USB device using ohci_hcd and address 4
>usb 2-3.1: configuration #1 chosen from 1 choice
>input: Microsoft Internet Keyboard Pro as /class/input/input0
>input: USB HID v1.10 Keyboard [Microsoft Internet Keyboard Pro] on usb-0000:00:02.1-3.1
>input: Microsoft Internet Keyboard Pro as /class/input/input1
>input: USB HID v1.10 Device [Microsoft Internet Keyboard Pro] on usb-0000:00:02.1-3.1
>usb 2-3.2: new low speed USB device using ohci_hcd and address 5
>usb 2-3.2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.2
>scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
>        <Adaptec 2940 Ultra SCSI adapter>
>        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
>
>  Vendor: HP        Model: C1537A            Rev: L411
>  Type:   Sequential-Access                  ANSI SCSI revision: 02
> target0:0:1: Beginning Domain Validation
> target0:0:1: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
> target0:0:1: Domain Validation skipping write tests
> target0:0:1: Ending Domain Validation
>I2O subsystem v1.325
>i2o: max drivers = 8
>i2o: Checking for PCI I2O controllers...
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>GSI 21 sharing vector 0xD9 and IRQ 21
>ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 217
>iop0: controller found (0000:01:07.0)
>iop0: limit sectors per request to 128
>iop0: using 64-bit DMA
>iop0: PCI I2O controller at E0000000 size=1048576
>iop0: Installed at IRQ 217
>i2o: iop0: Activating I2O controller...
>i2o: iop0: This may take a few minutes if there are many devices
>iop0: HRT has 1 entries of 16 bytes each.
>Adapter 00000012: TID 0000:[HPC*]:PCI 1: Bus 1 Device 22 Function 0
>i2o: iop0: Controller added
>I2O Block Device OSM v1.325
>block-osm: registered device at major 80
> i2o/hda: i2o/hda1
>block-osm: device added (TID: 209): i2o/hda
>sata_sil 0000:01:0d.0: version 2.0
>ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 209
>ata1: SATA max UDMA/100 cmd 0xFFFFC20000022080 ctl 0xFFFFC2000002208A bmdma 0xFFFFC20000022000 irq 209
>ata2: SATA max UDMA/100 cmd 0xFFFFC200000220C0 ctl 0xFFFFC200000220CA bmdma 0xFFFFC20000022008 irq 209
>scsi1 : sata_sil
>ata1: SATA link down (SStatus 0 SControl 310)
>scsi2 : sata_sil
>ata2: SATA link down (SStatus 0 SControl 310)
>Initializing USB Mass Storage driver...
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: Generic   Model: USB Storage-SMC   Rev: 314A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 3:0:0:0: Attached scsi removable disk sda
>  Vendor: Generic   Model: USB Storage-CFC   Rev: 314A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 3:0:0:1: Attached scsi removable disk sdb
>  Vendor: Generic   Model: USB Storage-MMC   Rev: 314A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 3:0:0:2: Attached scsi removable disk sdc
>  Vendor: Generic   Model: USB Storage-MSC   Rev: 314A
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 3:0:0:3: Attached scsi removable disk sdd
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1171798482.003:2): selinux=0 auid=4294967295
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 217
>eth0: Identified chip type is 'RTL8169s/8110s'.
>eth0: RTL8169 at 0xffffc20000024000, 00:0d:61:63:13:35, IRQ 217
>EDAC MC: Ver: 2.0.1 Dec 20 2006
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 177
>NVRM: loading NVIDIA Linux x86_64 Kernel Module  1.0-9631  Thu Nov  9 17:35:27 PST 2006
>gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 855kHz
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>input: PC Speaker as /class/input/input3
>ieee1394: Initialized config rom entry `ip1394'
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>eth1: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:05.0
>gameport: EMU10K1 is pci0000:01:08.1/gameport0, io 0x9400, speed 1159kHz
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 177
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
>GSI 22 sharing vector 0xE1 and IRQ 22
>ACPI: PCI Interrupt 0000:01:0e.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 225
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225]  MMIO=[e6006000-e60067ff]  Max Packet=[4096]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 193
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>intel8x0_measure_ac97_clock: measured 51648 usecs
>intel8x0: clocking to 48000
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>scsi 0:0:1:0: Attached scsi generic sg0 type 1
>sd 3:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:1: Attached scsi generic sg2 type 0
>sd 3:0:0:2: Attached scsi generic sg3 type 0
>sd 3:0:0:3: Attached scsi generic sg4 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>st: Version 20050830, fixed bufsize 32768, s/g segs 256
>st 0:0:1:0: Attached scsi tape st0
>st0: try direct i/o: yes (alignment 512 B)
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000d615600621682]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.4 loaded
>EXT3 FS on hda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on i2o/hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2008116k swap on /dev/hda2.  Priority:-1 extents:1 across:2008116k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:03:00.0 into 8x mode
>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'L210EUT3       á¼', timestamp 2006/06/17 04:58 (1000)

Actions: View

Attachments on bug 228946: 148282 | 148283 | 148284 | 148285