Attachment 148290 Details for Bug 229111 – dmesg

dmesg

a.txt (text/plain), 29.08 KB, created by Need Real Name on 2007-02-18 14:03:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Need Real Name

Created: 2007-02-18 14:03:58 UTC

Size: 29.08 KB

patch

obsolete

>Linux version 2.6.18-1.2257.fc5 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Fri Dec 15 16:06:24 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fffe000 (ACPI data)
> BIOS-e820: 000000007fffe000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 524272
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294896 pages, LIFO batch:31
>DMI present.
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000f93f0
>ACPI: XSDT (v001 A M I  OEMXSDT  0x08000618 MSFT 0x00000097) @ 0x7fff0100
>ACPI: FADT (v003 A M I  OEMFACP  0x08000618 MSFT 0x00000097) @ 0x7fff0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x08000618 MSFT 0x00000097) @ 0x7fff0390
>ACPI: SPCR (v001 A M I  OEMSPCR  0x08000618 MSFT 0x00000097) @ 0x7fff0420
>ACPI: MCFG (v001 A M I  OEMMCFG  0x08000618 MSFT 0x00000097) @ 0x7fff0470
>ACPI: SLIT (v001 A M I  OEMSLIT  0x08000618 MSFT 0x00000097) @ 0x7fff04b0
>ACPI: OEMB (v001 A M I  AMI_OEM  0x08000618 MSFT 0x00000097) @ 0x7fffe040
>ACPI: SRAT (v001 AMD    HAMMER   0x00000001 AMD  0x00000001) @ 0x7fff70d0
>ACPI: SSDT (v001 A M I  ACPI2PPC 0x00000001 AMI  0x00000001) @ 0x7fff7170
>ACPI: DSDT (v001  BOTO_ BOTO_100 0x00000100 INTL 0x20051117) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:1 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:1 APIC version 16
>WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xdaffb000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 17, address 0xdaffb000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Detected 2010.308 MHz processor.
>Built 1 zonelists.  Total pages: 524272
>Kernel command line: ro root=LABEL=mm/ console=tty0 console=ttyS0,115200n8
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (daffb000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0756000 soft=c0755000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2073736k/2097088k available (2027k kernel code, 22044k reserved, 795k data, 220k init, 1179584k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4022.48 BogoMIPS (lpj=2011240)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: After vendor identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: AMD Dual-Core AMD Opteron(tm) Processor 2212 HE stepping 02
>Checking 'hlt' instruction... OK.
>ACPI: Core revision 20060707
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking if image is initramfs... it is
>Freeing initrd memory: 915k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=134
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:06.0
>Boot video device is 0000:03:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13.BR30._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13.BR31._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
>ACPI: PCI Root Bridge [PCIB] (0000:80)
>PCI: Probing PCI hardware (bus 80)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR20._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR21._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR22._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR23._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR24._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCIB.BR25._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *11
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LE3A] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LE3B] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LE3C] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [LE3D] (IRQs 40 41 42 43) *0, disabled.
>ACPI: PCI Interrupt Link [IIM0] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [IIM1] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [ISI0] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [ISI1] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [ISI2] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [ILSM] (IRQs 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [ILPM] (IRQs 44 45 46 47) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 17 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>pnp: 00:06: ioport range 0xb00-0xb7f has been reserved
>pnp: 00:06: ioport range 0xb80-0xb83 has been reserved
>pnp: 00:06: ioport range 0xb84-0xb85 has been reserved
>pnp: 00:06: ioport range 0xb86-0xb8d has been reserved
>pnp: 00:06: ioport range 0xb90-0xb9f has been reserved
>pnp: 00:06: ioport range 0xc00-0xcfe could not be reserved
>pnp: 00:09: ioport range 0x3000-0x307f has been reserved
>pnp: 00:09: ioport range 0x3080-0x30ff has been reserved
>pnp: 00:09: ioport range 0x3400-0x347f has been reserved
>pnp: 00:09: ioport range 0x3480-0x34ff has been reserved
>pnp: 00:09: ioport range 0x3800-0x387f has been reserved
>pnp: 00:09: ioport range 0x3880-0x38ff has been reserved
>pnp: 00:0d: ioport range 0xa00-0xa0f has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: df000000-dfdfffff
>  PREFETCH window: db000000-dbffffff
>PCI: Bridge: 0000:04:00.0
>  IO window: b000-bfff
>  MEM window: dff00000-dfffffff
>  PREFETCH window: dc000000-ddffffff
>PCI: Bridge: 0000:04:00.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: b000-bfff
>  MEM window: dfe00000-dfffffff
>  PREFETCH window: dc000000-ddffffff
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0f.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:04:00.1[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>PCI: Bridge: 0000:80:0a.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:80:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:80:0c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:80:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:80:0e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:80:0f.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:80:0a.0 to 64
>PCI: Setting latency timer of device 0000:80:0b.0 to 64
>PCI: Setting latency timer of device 0000:80:0c.0 to 64
>PCI: Setting latency timer of device 0000:80:0d.0 to 64
>PCI: Setting latency timer of device 0000:80:0e.0 to 64
>PCI: Setting latency timer of device 0000:80:0f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1171806970.985:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key DA272E53BD0532F6
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0f.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0a.0 to 64
>pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0a.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0b.0 to 64
>pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0c.0 to 64
>pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0d.0 to 64
>pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0e.0 to 64
>pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0e.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0f.0 to 64
>pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0f.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI: Getting cpuindex for acpiid 0x4
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
>NFORCE-MCP55: chipset revision 161
>NFORCE-MCP55: not 100% native mode: will probe irqs later
>NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: Slimtype DVDRW SSM-8515S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 Dual-Core AMD Opteron(tm) Processor 2212 HE processors (version 2.00.00)
>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xc
>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0xe
>powernow-k8:    2 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S4 S5)
>Freeing unused kernel memory: 220k freed
>Write protecting the kernel read-only data: 376k
>SCSI subsystem initialized
>3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
>ACPI: PCI Interrupt 0000:05:01.0[A] -> Link [LNEA] -> GSI 19 (level, low) -> IRQ 177
>3w-9xxx: scsi0: AEN: INFO (0x04:0x0053): Battery capacity test is overdue:.
>scsi0 : 3ware 9000 Storage Controller
>3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xdffff000, IRQ: 177.
>3w-9xxx: scsi0: Firmware FE9X 3.01.01.028, BIOS BE9X 3.01.00.024, Ports: 8.
>  Vendor: AMCC      Model: 9550SX-8LP DISK   Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sda: 781228032 512-byte hdwr sectors (399989 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>SCSI device sda: drive cache: write back, no read (daft)
>SCSI device sda: 781228032 512-byte hdwr sectors (399989 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>SCSI device sda: drive cache: write back, no read (daft)
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: AMCC      Model: 9550SX-8LP DISK   Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sdb: 781228032 512-byte hdwr sectors (399989 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
>SCSI device sdb: 781228032 512-byte hdwr sectors (399989 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: drive cache: write back, no read (daft)
> sdb: sdb1
>sd 0:0:1:0: Attached scsi disk sdb
>  Vendor: AMCC      Model: 9550SX-8LP DISK   Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sdc: 1464821760 512-byte hdwr sectors (749989 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: drive cache: write back, no read (daft)
>SCSI device sdc: 1464821760 512-byte hdwr sectors (749989 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: drive cache: write back, no read (daft)
> sdc: sdc1
>sd 0:0:2:0: Attached scsi disk sdc
>  Vendor: AMCC      Model: 9550SX-8LP DISK   Rev: 3.01
>  Type:   Direct-Access                      ANSI SCSI revision: 03
>SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 23 00 00 00
>SCSI device sdd: drive cache: write back, no read (daft)
>SCSI device sdd: 781228032 512-byte hdwr sectors (399989 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 23 00 00 00
>SCSI device sdd: drive cache: write back, no read (daft)
> sdd: sdd1
>sd 0:0:3:0: Attached scsi disk sdd
>audit(1171806975.362:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1481 types, 152 bools, 1 sens, 256 cats
>security:  58 classes, 43486 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext2), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1171806975.620:3): policy loaded auid=4294967295
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>libata version 2.00 loaded.
>sata_nv 0000:00:05.0: version 2.0
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 98
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ata1: SATA max UDMA/133 cmd 0xA480 ctl 0xA402 bmdma 0x9C00 irq 98
>ata2: SATA max UDMA/133 cmd 0xA080 ctl 0xA002 bmdma 0x9C08 irq 98
>scsi1 : sata_nv
>EDAC MC: Ver: 2.0.1 Dec 15 2006
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>input: PC Speaker as /class/input/input0
>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ata1: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xA487
>scsi2 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xA087
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 106
>PCI: Setting latency timer of device 0000:00:05.1 to 64
>ata3: SATA max UDMA/133 cmd 0x9880 ctl 0x9802 bmdma 0x9080 irq 106
>ata4: SATA max UDMA/133 cmd 0x9480 ctl 0x9402 bmdma 0x9088 irq 106
>scsi3 : sata_nv
>ata3: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x9887
>scsi4 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x9487
>ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSA2] -> GSI 21 (level, low) -> IRQ 114
>PCI: Setting latency timer of device 0000:00:05.2 to 64
>ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8C02 bmdma 0x8480 irq 114
>ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8802 bmdma 0x8488 irq 114
>scsi5 : sata_nv
>ata5: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x9007
>scsi6 : sata_nv
>ata6: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x8887
>ACPI: PCI Interrupt Link [ISI0] enabled at IRQ 47
>ACPI: PCI Interrupt 0000:80:05.0[A] -> Link [ISI0] -> GSI 47 (level, low) -> IRQ 122
>PCI: Setting latency timer of device 0000:80:05.0 to 64
>ata7: SATA max UDMA/133 cmd 0xE480 ctl 0xE402 bmdma 0xDC00 irq 122
>ata8: SATA max UDMA/133 cmd 0xE080 ctl 0xE002 bmdma 0xDC08 irq 122
>scsi7 : sata_nv
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 20 (level, low) -> IRQ 130
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>ata7: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xE487
>scsi8 : sata_nv
>eth0: forcedeth.c: subsystem: 01170:0024 bound to 0000:00:08.0
>ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMAD] -> GSI 23 (level, low) -> IRQ 98
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 0:0:2:0: Attached scsi generic sg2 type 0
>sd 0:0:3:0: Attached scsi generic sg3 type 0
>ata8: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xE087
>ACPI: PCI Interrupt Link [ISI1] enabled at IRQ 46
>ACPI: PCI Interrupt 0000:80:05.1[B] -> Link [ISI1] -> GSI 46 (level, low) -> IRQ 138
>PCI: Setting latency timer of device 0000:80:05.1 to 64
>ata9: SATA max UDMA/133 cmd 0xD880 ctl 0xD802 bmdma 0xD080 irq 138
>ata10: SATA max UDMA/133 cmd 0xD480 ctl 0xD402 bmdma 0xD088 irq 138
>scsi9 : sata_nv
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>Floppy drive(s): fd0 is 1.44M
>ata9: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xD887
>scsi10 : sata_nv
>eth1: forcedeth.c: subsystem: 01170:0024 bound to 0000:00:09.0
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 22 (level, low) -> IRQ 106
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 106, io mem 0xdeffb000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 21 (level, low) -> IRQ 114
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 114, io mem 0xdeffac00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>ata10: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xD487
>ACPI: PCI Interrupt Link [ISI2] enabled at IRQ 45
>ACPI: PCI Interrupt 0000:80:05.2[C] -> Link [ISI2] -> GSI 45 (level, low) -> IRQ 146
>PCI: Setting latency timer of device 0000:80:05.2 to 64
>ata11: SATA max UDMA/133 cmd 0xD000 ctl 0xCC02 bmdma 0xC480 irq 146
>ata12: SATA max UDMA/133 cmd 0xC880 ctl 0xC802 bmdma 0xC488 irq 146
>scsi11 : sata_nv
>ohci_hcd 0000:00:02.0: wakeup
>ata11: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xD007
>scsi12 : sata_nv
>usb 1-7: new full speed USB device using ohci_hcd and address 2
>ata12: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xC887
>ACPI: PCI Interrupt Link [IIM0] enabled at IRQ 44
>ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [IIM0] -> GSI 44 (level, low) -> IRQ 154
>PCI: Setting latency timer of device 0000:80:08.0 to 64
>forcedeth: using HIGHDMA
>usb 1-7: configuration #1 chosen from 1 choice
>input: ServerEngines SE USB Device as /class/input/input1
>input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:02.0-7
>input: ServerEngines SE USB Device as /class/input/input2
>input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:02.0-7
>eth2: forcedeth.c: subsystem: 01170:0024 bound to 0000:80:08.0
>ACPI: PCI Interrupt Link [IIM1] enabled at IRQ 47
>ACPI: PCI Interrupt 0000:80:09.0[A] -> Link [IIM1] -> GSI 47 (level, low) -> IRQ 122
>PCI: Setting latency timer of device 0000:80:09.0 to 64
>forcedeth: using HIGHDMA
>eth3: forcedeth.c: subsystem: 01170:0024 bound to 0000:80:09.0
>i2c_adapter i2c-2: nForce2 SMBus adapter at 0xe880
>i2c_adapter i2c-3: nForce2 SMBus adapter at 0xe800
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>SELinux: initialized (dev sda1, type ext2), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev sda8, type ext2), uses xattr
>SELinux: initialized (dev sda6, type ext2), uses xattr
>SELinux: initialized (dev sdb1, type ext2), uses xattr
>SELinux: initialized (dev sda2, type ext2), uses xattr
>SELinux: initialized (dev sda5, type ext2), uses xattr
>SELinux: initialized (dev sdc1, type ext2), uses xattr
>SELinux: initialized (dev sdd1, type ext2), uses xattr
>Adding 2104472k swap on /dev/sda7.  Priority:-1 extents:1 across:2104472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 228 bytes per conntrack
>Time: acpi_pm clocksource has been installed.
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 229111: 148290