Attachment 148295 Details for Bug 216759 – log of lspci -vvv

log of lspci -vvv

lspci.log (text/plain), 11.69 KB, created by Armijn Hemel on 2007-02-18 15:57:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Armijn Hemel

Created: 2007-02-18 15:57:44 UTC

Size: 11.69 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
>	Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Capabilities: [e4] Vendor Specific Information
>	Capabilities: [a0] AGP version 3.0
>		Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>
>00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: f8000000-f9ffffff
>	Prefetchable memory behind bridge: e8000000-f7ffffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 4: I/O ports at cc00 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 18
>	Region 4: I/O ports at c000 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 16
>	Region 4: I/O ports at c400 [size=32]
>
>00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 17
>	Region 4: I/O ports at c800 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 7470
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 19
>	Region 0: Memory at fa100000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: fa000000-fa0fffff
>	Prefetchable memory behind bridge: fff00000-000fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: I/O ports at <unassigned>
>	Region 1: I/O ports at <unassigned>
>	Region 2: I/O ports at <unassigned>
>	Region 3: I/O ports at <unassigned>
>	Region 4: I/O ports at f000 [size=16]
>	Region 5: Memory at 70000000 (32-bit, non-prefetchable) [size=1K]
>
>00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 20
>	Region 4: I/O ports at 0500 [size=32]
>
>00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 0120
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 20
>	Region 0: I/O ports at d400 [size=256]
>	Region 1: I/O ports at d800 [size=64]
>	Region 2: Memory at fa101000 (32-bit, non-prefetchable) [size=512]
>	Region 3: Memory at fa102000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA])
>	Subsystem: Hightech Information System Ltd. Unknown device 8500
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at a000 [size=256]
>	Region 2: Memory at f9000000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at f8000000 [disabled] [size=128K]
>	Capabilities: [58] AGP version 3.0
>		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
>	Subsystem: Hightech Information System Ltd. Unknown device 8501
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [disabled] [size=128M]
>	Region 1: Memory at f9010000 (32-bit, non-prefetchable) [disabled] [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
>	Subsystem: Z-Com, Inc. XG-600 and clones Wireless Adapter
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 80 (2500ns min, 7000ns max), Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=8K]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:02.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
>	Subsystem: Unknown device b100:0003
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (250ns min, 32000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at b000 [size=256]
>	Region 1: Memory at fa002000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>	Subsystem: Realtek Semiconductor Co., Ltd. RT8139
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at b400 [size=256]
>	Region 1: Memory at fa003000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:09.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 012c
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: I/O ports at b800 [size=256]
>	Region 1: Memory at fa004000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 716d
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at fa005000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: I/O ports at bc00 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 216759: 144529 | 148292 | 148293 | 148294 | 148295