Attachment 1483412 Details for Bug 1629331 – undercloud.conf file used for "openstack undercloud install"

undercloud.conf file used for "openstack undercloud install"

undercloud.conf (text/plain), 14.00 KB, created by mike.oliveras on 2018-09-14 21:57:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: mike.oliveras

Created: 2018-09-14 21:57:20 UTC

Size: 14.00 KB

patch

obsolete

>[DEFAULT]
>local_ip = 10.1.0.1/24
># below two IPs are only for SSL
>undercloud_public_host = 10.1.0.4
>undercloud_admin_host = 10.1.0.3
>#
>local_interface = enp0s25
>masquerade_network = 10.1.0.0/24
>dhcp_start = 10.1.0.20
>dhcp_end = 10.1.0.30
>network_cidr = 10.1.0.0/24
>network_gateway = 10.1.0.1
>inspection_iprange = 10.1.0.150,10.1.0.180
>
># manual-management is not enabled by default, set in /etc/ironic/ironic.conf
>enabled_drivers = pxe_ipmitool,pxe_drac,pxe_ilo,fake_pxe
>enabled_hardware_types=idrac,ilo,ipmi,redfish,manual-management
>
>overcloud_domain_name = openstacktest.com
>undercloud_nameservers = 10.209.140.39
>
># disable ssl install
>generate_service_certificate = false
>
>#
>
>#
># From instack-undercloud
>#
>
># Fully qualified hostname (including domain) to set on the
># Undercloud. If left unset, the current hostname will be used, but
># the user is responsible for configuring all system hostname settings
># appropriately.  If set, the undercloud install will configure all
># system hostname settings. (string value)
>#undercloud_hostname = <None>
>
># IP information for the interface on the Undercloud that will be
># handling the PXE boots and DHCP for Overcloud instances.  The IP
># portion of the value will be assigned to the network interface
># defined by local_interface, with the netmask defined by the prefix
># portion of the value. (string value)
>#local_ip = 192.168.24.1/24
>
># Virtual IP or DNS address to use for the public endpoints of
># Undercloud services. Only used with SSL. (string value)
># Deprecated group/name - [DEFAULT]/undercloud_public_vip
>#undercloud_public_host = 192.168.24.2
>
># Virtual IP or DNS address to use for the admin endpoints of
># Undercloud services. Only used with SSL. (string value)
># Deprecated group/name - [DEFAULT]/undercloud_admin_vip
>#undercloud_admin_host = 192.168.24.3
>
># DNS nameserver(s) to use for the undercloud node. (list value)
>#undercloud_nameservers =
>
># List of ntp servers to use. (list value)
>#undercloud_ntp_servers =
>
># DNS domain name to use when deploying the overcloud. The overcloud
># parameter "CloudDomain" must be set to a matching value. (string
># value)
>#overcloud_domain_name = localdomain
>
># List of routed network subnets for provisioning and introspection.
># Comma separated list of names/tags. For each network a section/group
># needs to be added to the configuration file with these parameters
># set: cidr, dhcp_start, dhcp_end, inspection_iprange, gateway and
># masquerade. Note: The section/group must be placed before or after
># any other section. (See the example section [ctlplane-subnet] in the
># sample configuration file.) (list value)
>#subnets = ctlplane-subnet
>
># Name of the local subnet, where the PXE boot and DHCP interfaces for
># overcloud instances is located. The IP address of the
># local_ip/local_interface should reside in this subnet. (string
># value)
>#local_subnet = ctlplane-subnet
>
># Certificate file to use for OpenStack service SSL connections.
># Setting this enables SSL for the OpenStack API endpoints, leaving it
># unset disables SSL. (string value)
>#undercloud_service_certificate =
>
># When set to True, an SSL certificate will be generated as part of
># the undercloud install and this certificate will be used in place of
># the value for undercloud_service_certificate.  The resulting
># certificate will be written to
># /etc/pki/tls/certs/undercloud-[undercloud_public_host].pem.  This
># certificate is signed by CA selected by the
># "certificate_generation_ca" option. (boolean value)
>#generate_service_certificate = true
>
># The certmonger nickname of the CA from which the certificate will be
># requested. This is used only if the generate_service_certificate
># option is set. Note that if the "local" CA is selected the
># certmonger's local CA certificate will be extracted to /etc/pki/ca-
># trust/source/anchors/cm-local-ca.pem and subsequently added to the
># trust chain. (string value)
>#certificate_generation_ca = local
>
># The kerberos principal for the service that will use the
># certificate. This is only needed if your CA requires a kerberos
># principal. e.g. with FreeIPA. (string value)
>#service_principal =
>
># Network interface on the Undercloud that will be handling the PXE
># boots and DHCP for Overcloud instances. (string value)
>#local_interface = eth1
>
># MTU to use for the local_interface. (integer value)
>#local_mtu = 1500
>
># DEPRECATED: Network that will be masqueraded for external access, if
># required. This should be the subnet used for PXE booting. (string
># value)
># This option is deprecated for removal.
># Its value may be silently ignored in the future.
># Reason: With support for routed networks, masquerading of the
># provisioning networks is moved to a boolean option for each subnet.
>#masquerade_network = 192.168.24.0/24
>
># Path to hieradata override file. If set, the file will be copied
># under /etc/puppet/hieradata and set as the first file in the hiera
># hierarchy. This can be used to custom configure services beyond what
># undercloud.conf provides (string value)
>#hieradata_override =
>
># Path to network config override template. If set, this template will
># be used to configure the networking via os-net-config. Must be in
># json format. Templated tags can be used within the template, see
># instack-undercloud/elements/undercloud-stack-config/net-
># config.json.template for example tags (string value)
>#net_config_override =
>
># Network interface on which inspection dnsmasq will listen.  If in
># doubt, use the default value. (string value)
># Deprecated group/name - [DEFAULT]/discovery_interface
>#inspection_interface = br-ctlplane
>
># Whether to enable extra hardware collection during the inspection
># process. Requires python-hardware or python-hardware-detect package
># on the introspection image. (boolean value)
>#inspection_extras = true
>
># Whether to run benchmarks when inspecting nodes. Requires
># inspection_extras set to True. (boolean value)
># Deprecated group/name - [DEFAULT]/discovery_runbench
>#inspection_runbench = false
>
># Makes ironic-inspector enroll any unknown node that PXE-boots
># introspection ramdisk in Ironic. By default, the "ipmi" driver is
># used for new nodes (it is automatically enabled when this option is
># set to True). Set discovery_default_driver to override.
># Introspection rules can also be used to specify driver information
># for newly enrolled nodes. (boolean value)
>#enable_node_discovery = false
>
># The default hardware type to use for newly discovered nodes
># (requires enable_node_discovery set to True). It is automatically
># added to enabled_hardware_types. (string value)
>#discovery_default_driver = ipmi
>
># Whether to enable the debug log level for Undercloud OpenStack
># services. (boolean value)
>#undercloud_debug = true
>
># Whether to update packages during the Undercloud install. (boolean
># value)
>#undercloud_update_packages = true
>
># Whether to install Tempest in the Undercloud. (boolean value)
>#enable_tempest = true
>
># Whether to install Telemetry services (ceilometer, gnocchi, aodh,
># panko ) in the Undercloud. (boolean value)
>#enable_telemetry = false
>
># Whether to install the TripleO UI. (boolean value)
>#enable_ui = true
>
># Whether to install requirements to run the TripleO validations.
># (boolean value)
>#enable_validations = true
>
># Whether to install the Volume service. It is not currently used in
># the undercloud. (boolean value)
>#enable_cinder = false
>
># Whether to install novajoin metadata service in the Undercloud.
># (boolean value)
>#enable_novajoin = false
>
># Whether to enable docker container images to be build on the
># undercloud. (boolean value)
>#enable_container_images_build = true
>
># Array of host/port combiniations of docker insecure registries.
># (list value)
>#docker_insecure_registries =
>
># One Time Password to register Undercloud node with an IPA server.
># Required when enable_novajoin = True. (string value)
>#ipa_otp =
>
># Whether to use iPXE for deploy and inspection. (boolean value)
># Deprecated group/name - [DEFAULT]/ipxe_deploy
>#ipxe_enabled = true
>
># Maximum number of attempts the scheduler will make when deploying
># the instance. You should keep it greater or equal to the number of
># bare metal nodes you expect to deploy at once to work around
># potential race condition when scheduling. (integer value)
># Minimum value: 1
>#scheduler_max_attempts = 30
>
># Whether to clean overcloud nodes (wipe the hard drive) between
># deployments and after the introspection. (boolean value)
>#clean_nodes = false
>
># List of enabled bare metal hardware types (next generation drivers).
># (list value)
>#enabled_hardware_types = ipmi,redfish,ilo,idrac
>
># An optional docker 'registry-mirror' that will beconfigured in
># /etc/docker/daemon.json. (string value)
>#docker_registry_mirror =
>
># List of additional architectures enabled in your cloud environment.
># The list of supported values is: ppc64le (list value)
>#additional_architectures =
>
># Enable support for routed ctlplane networks. (boolean value)
>#enable_routed_networks = false
>
>
>[auth]
>
>#
># From instack-undercloud
>#
>
># Password used for MySQL root user. If left unset, one will be
># automatically generated. (string value)
>#undercloud_db_password = <None>
>
># Keystone admin token. If left unset, one will be automatically
># generated. (string value)
>#undercloud_admin_token = <None>
>
># Keystone admin password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_admin_password = <None>
>
># Glance service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_glance_password = <None>
>
># Heat db encryption key(must be 16, 24, or 32 characters. If left
># unset, one will be automatically generated. (string value)
>#undercloud_heat_encryption_key = <None>
>
># Heat service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_heat_password = <None>
>
># Heat cfn service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_heat_cfn_password = <None>
>
># Neutron service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_neutron_password = <None>
>
># Nova service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_nova_password = <None>
>
># Ironic service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_ironic_password = <None>
>
># Aodh service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_aodh_password = <None>
>
># Gnocchi service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_gnocchi_password = <None>
>
># Ceilometer service password. If left unset, one will be
># automatically generated. (string value)
>#undercloud_ceilometer_password = <None>
>
># Panko service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_panko_password = <None>
>
># Ceilometer metering secret. If left unset, one will be automatically
># generated. (string value)
>#undercloud_ceilometer_metering_secret = <None>
>
># Ceilometer snmpd read-only user. If this value is changed from the
># default, the new value must be passed in the overcloud environment
># as the parameter SnmpdReadonlyUserName. This value must be between 1
># and 32 characters long. (string value)
>#undercloud_ceilometer_snmpd_user = ro_snmp_user
>
># Ceilometer snmpd password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_ceilometer_snmpd_password = <None>
>
># Swift service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_swift_password = <None>
>
># Mistral service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_mistral_password = <None>
>
># Rabbitmq cookie. If left unset, one will be automatically generated.
># (string value)
>#undercloud_rabbit_cookie = <None>
>
># Rabbitmq password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_rabbit_password = <None>
>
># Rabbitmq username. If left unset, one will be automatically
># generated. (string value)
>#undercloud_rabbit_username = <None>
>
># Heat stack domain admin password. If left unset, one will be
># automatically generated. (string value)
>#undercloud_heat_stack_domain_admin_password = <None>
>
># Swift hash suffix. If left unset, one will be automatically
># generated. (string value)
>#undercloud_swift_hash_suffix = <None>
>
># HAProxy stats password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_haproxy_stats_password = <None>
>
># Zaqar password. If left unset, one will be automatically generated.
># (string value)
>#undercloud_zaqar_password = <None>
>
># Horizon secret key. If left unset, one will be automatically
># generated. (string value)
>#undercloud_horizon_secret_key = <None>
>
># Cinder service password. If left unset, one will be automatically
># generated. (string value)
>#undercloud_cinder_password = <None>
>
># Novajoin vendordata plugin service password. If left unset, one will
># be automatically generated. (string value)
>#undercloud_novajoin_password = <None>
>
>
>[ctlplane-subnet]
>
>#
># From instack-undercloud
>#
>
># Network CIDR for the Neutron-managed subnet for Overcloud instances.
># (string value)
># Deprecated group/name - [DEFAULT]/network_cidr
>#cidr = 192.168.24.0/24
>
># Start of DHCP allocation range for PXE and DHCP of Overcloud
># instances on this network. (string value)
># Deprecated group/name - [DEFAULT]/dhcp_start
>#dhcp_start = 192.168.24.5
>
># End of DHCP allocation range for PXE and DHCP of Overcloud instances
># on this network. (string value)
># Deprecated group/name - [DEFAULT]/dhcp_end
>#dhcp_end = 192.168.24.24
>
># Temporary IP range that will be given to nodes on this network
># during the inspection process. Should not overlap with the range
># defined by dhcp_start and dhcp_end, but should be in the same ip
># subnet. (string value)
># Deprecated group/name - [DEFAULT]/inspection_iprange
>#inspection_iprange = 192.168.24.100,192.168.24.120
>
># Network gateway for the Neutron-managed network for Overcloud
># instances on this network. (string value)
># Deprecated group/name - [DEFAULT]/network_gateway
>#gateway = 192.168.24.1
>
># The network will be masqueraded for external access. (boolean value)
>#masquerade = false

Actions: View

Attachments on bug 1629331: 1483412 | 1483413 | 1483414