Attachment 1483567 Details for Bug 1629401 – lspci

lspci

lspci.output (text/plain), 21.17 KB, created by Luca Giuzzi on 2018-09-15 17:38:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Luca Giuzzi

Created: 2018-09-15 17:38:22 UTC

Size: 21.17 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=09 <?>
>
>00:01.0 PCI bridge: Intel Corporation 82Q963/Q965 PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 16
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 00001000-00001fff [size=4K]
>	Memory behind bridge: f0200000-f04fffff [size=3M]
>	Prefetchable memory behind bridge: 00000000e0000000-00000000f01fffff [size=258M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [88] Subsystem: Intel Corporation Device 0000
>	Capabilities: [80] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
>		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns
>			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
>			Slot #1, PowerLimit 25.000W; Interlock- NoCompl+
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Off, PwrInd On, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
>			Changed: MRL- PresDet+ LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>	Capabilities: [140 v1] Root Complex Link
>		Desc:	PortNumber=02 ComponentID=01 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed19000
>	Kernel driver in use: pcieport
>
>00:03.0 Communication controller: Intel Corporation 82Q963/Q965 HECI Controller (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 27
>	Region 0: Memory at f0526100 (64-bit, non-prefetchable) [size=16]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee01004  Data: 4026
>	Kernel driver in use: mei_me
>	Kernel modules: mei_me
>
>00:19.0 Ethernet controller: Intel Corporation 82566DM Gigabit Network Connection (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2800
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 25
>	Region 0: Memory at f0500000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at f0524000 (32-bit, non-prefetchable) [size=4K]
>	Region 2: I/O ports at 2000 [size=32]
>	Capabilities: [c8] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee02004  Data: 4025
>	Kernel driver in use: e1000e
>	Kernel modules: e1000e
>
>00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 2020 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at 2040 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 22
>	Region 0: Memory at f0525800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci-pci
>
>00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 28
>	Region 0: Memory at f0520000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee02004  Data: 4027
>	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed- WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
>			Status:	NegoPending- InProgress-
>		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
>			Status:	NegoPending- InProgress-
>	Capabilities: [130 v1] Root Complex Link
>		Desc:	PortNumber=0f ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c000
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>
>00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
>	I/O behind bridge: 00003000-00003fff [size=4K]
>	Memory behind bridge: f8000000-f81fffff [size=2M]
>	Prefetchable memory behind bridge: 00000000f8200000-00000000f83fffff [size=2M]
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
>		DevCap:	MaxPayload 128 bytes, PhantFunc 0
>			ExtTag- RBE+
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>			MaxPayload 128 bytes, MaxReadReq 128 bytes
>		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
>		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <1us, L1 <4us
>			ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk-
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
>			Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
>		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
>			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
>		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
>			Changed: MRL- PresDet- LinkState-
>		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
>		RootCap: CRSVisible-
>		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
>	Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit-
>		Address: 00000000  Data: 0000
>	Capabilities: [90] Subsystem: Hewlett-Packard Company Device 2801
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [100 v1] Virtual Channel
>		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
>		Arb:	Fixed+ WRR32- WRR64- WRR128-
>		Ctrl:	ArbSelect=Fixed
>		Status:	InProgress-
>		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
>			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
>			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
>			Status:	NegoPending- InProgress-
>	Capabilities: [180 v1] Root Complex Link
>		Desc:	PortNumber=01 ComponentID=02 EltType=Config
>		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
>			Addr:	00000000fed1c001
>	Kernel driver in use: pcieport
>
>00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 4: I/O ports at 2060 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 21
>	Region 4: I/O ports at 2080 [size=32]
>	Kernel driver in use: uhci_hcd
>
>00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 20
>	Region 0: Memory at f0525c00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port: BAR=1 offset=00a0
>	Kernel driver in use: ehci-pci
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
>	I/O behind bridge: 0000f000-00000fff [empty]
>	Memory behind bridge: fff00000-000fffff [empty]
>	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
>	Capabilities: [50] Subsystem: Hewlett-Packard Company Device 2801
>
>00:1f.0 ISA bridge: Intel Corporation 82801HO (ICH8DO) LPC Interface Controller (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
>	Kernel driver in use: lpc_ich
>	Kernel modules: lpc_ich
>
>00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 02)
>	Subsystem: Hewlett-Packard Company Device 2801
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 24
>	Region 0: I/O ports at 2100 [size=8]
>	Region 1: I/O ports at 2110 [size=4]
>	Region 2: I/O ports at 2108 [size=8]
>	Region 3: I/O ports at 2114 [size=4]
>	Region 4: I/O ports at 20c0 [size=32]
>	Region 5: Memory at f0525000 (32-bit, non-prefetchable) [size=2K]
>	Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
>		Address: fee01004  Data: 4021
>	Capabilities: [70] Power Management version 3
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
>	Kernel driver in use: ahci
>
>01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Caicos XT [Radeon HD 7470/8470 / R5 235/310 OEM] (prog-if 00 [VGA controller])
>	Subsystem: PC Partner Limited / Sapphire Technology Device a01d
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 26
>	Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>	Region 2: Memory at f0400000 (64-bit, non-prefetchable) [size=128K]
>	Region 4: I/O ports at 1000 [size=256]
>	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>			 AtomicOpsCtl: ReqEn-
>		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-
>			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>			 Compliance De-emphasis: -6dB
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee01004  Data: 4025
>	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>	Capabilities: [150 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>		HeaderLog: 00000000 00000000 00000000 00000000
>	Kernel driver in use: radeon
>	Kernel modules: radeon
>
>01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio [Radeon HD 6450 / 7450/8450/8490 OEM / R5 230/235/235X OEM]
>	Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 6450 1GB DDR3
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>	Latency: 0, Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 29
>	Region 0: Memory at f0420000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 3
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D3 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
>			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
>			MaxPayload 128 bytes, MaxReadReq 512 bytes
>		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>			ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
>		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>		DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
>		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>			 AtomicOpsCtl: ReqEn-
>		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
>			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
>	Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>		Address: 00000000fee01004  Data: 4027
>	Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>	Capabilities: [150 v1] Advanced Error Reporting
>		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
>		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>		AERCap:	First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
>			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
>		HeaderLog: 00000000 00000000 00000000 00000000
>	Kernel driver in use: snd_hda_intel
>	Kernel modules: snd_hda_intel
>

Actions: View

Attachments on bug 1629401: 1483567 | 1483568