Attachment 1485151 Details for Bug 1627676 – console log messages for failed boot

console log messages for failed boot

doc (text/plain), 19.60 KB, created by Richard W.M. Jones on 2018-09-20 13:36:38 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard W.M. Jones

Created: 2018-09-20 13:36:38 UTC

Size: 19.60 KB

patch

obsolete

>Initializing cgroup subsys cpuset
>Initializing cgroup subsys cpu
>Linux version 2.6.32-754.el6.x86_64 (mockbuild@x86-033.build.eng.bos.redhat.com) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-23) (GCC) ) #1 SMP Thu May 24 18:18:25 EDT 2018
>Command line: ro root=/dev/mapper/vg_hpdl380g1002-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=rhel_hp-dl380g10-02/swap rd_LVM_LV=vg_hpdl380g1002/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_hpdl380g1002/lv_swap  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM console=ttyS0
>KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  Centaur CentaurHauls
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffdc000 (usable)
> BIOS-e820: 000000003ffdc000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>SMBIOS version 2.8 @ 0xF62B0
>SMBIOS 2.8 present.
>Hypervisor detected: KVM
>last_pfn = 0x3ffdc max_arch_pfn = 0x400000000
>PAT not supported by CPU.
>init_memory_mapping: 0000000000000000-000000003ffdc000
>RAMDISK: 35f4e000 - 37fefc21
>ACPI: Deleted _OSI(Windows 2012)
>ACPI: Deleted _OSI(Windows 2013)
>ACPI: RSDP 00000000000f6280 00014 (v00 BOCHS )
>ACPI: RSDT 000000003ffe20ce 0002C (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
>ACPI: FACP 000000003ffe1eea 00074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
>ACPI: DSDT 000000003ffe0040 01EAA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
>ACPI: FACS 000000003ffe0000 00040
>ACPI: APIC 000000003ffe1f5e 00170 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
>Setting APIC routing to flat.
>No NUMA configuration found
>Faking a node at 0000000000000000-000000003ffdc000
>Bootmem setup node 0 0000000000000000-000000003ffdc000
>  NODE_DATA [0000000000009000 - 000000000003cfff]
>  bootmap [000000000003d000 -  0000000000044fff] pages 8
>(7 early reservations) ==> bootmem [0000000000 - 003ffdc000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
>  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
>  #2 [0001000000 - 0002050a64]    TEXT DATA BSS ==> [0001000000 - 0002050a64]
>  #3 [0035f4e000 - 0037fefc21]          RAMDISK ==> [0035f4e000 - 0037fefc21]
>  #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
>  #5 [0002051000 - 00020510e1]              BRK ==> [0002051000 - 00020510e1]
>  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
>Reserving 128MB of memory at 48MB for crashkernel (System RAM: 1023MB)
>kvm-clock: Using msrs 4b564d01 and 4b564d00
>kvm-clock: cpu 0, msr 0:1c3db81, boot clock
>Zone PFN ranges:
>  DMA      0x00000001 -> 0x00001000
>  DMA32    0x00001000 -> 0x00100000
>  Normal   0x00100000 -> 0x00100000
>Movable zone start PFN for each node
>early_node_map[2] active PFN ranges
>    0: 0x00000001 -> 0x0000009f
>    0: 0x00000100 -> 0x0003ffdc
>ACPI: PM-Timer IO Port: 0x608
>Setting APIC routing to flat.
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] disabled)
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] disabled)
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] disabled)
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] disabled)
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] disabled)
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] disabled)
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0e] disabled)
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0f] disabled)
>ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] disabled)
>ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] disabled)
>ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] disabled)
>ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] disabled)
>ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] disabled)
>ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] disabled)
>ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] disabled)
>ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] disabled)
>ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] disabled)
>ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] disabled)
>ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] disabled)
>ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] disabled)
>ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] disabled)
>ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] disabled)
>ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x1e] disabled)
>ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x1f] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>Using ACPI (MADT) for SMP configuration information
>SMP: Allowing 32 CPUs, 31 hotplug CPUs
>PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
>PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
>PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 40000000 (gap: 40000000:beffc000)
>Booting paravirtualized kernel on KVM
>NR_CPUS:4096 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
>PERCPU: Embedded 33 pages/cpu @ffff88000b400000 s104088 r8192 d22888 u262144
>pcpu-alloc: s104088 r8192 d22888 u262144 alloc=1*2097152
>pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
>pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
>kvm-clock: cpu 0, msr 0:b418b81, primary cpu clock
>kvm-stealtime: cpu 0, msr b412d00
>Built 1 zonelists in Node order, mobility grouping on.  Total pages: 258326
>Policy zone: DMA32
>Kernel command line: ro root=/dev/mapper/vg_hpdl380g1002-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_LVM_LV=rhel_hp-dl380g10-02/swap rd_LVM_LV=vg_hpdl380g1002/lv_root rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=128M rd_LVM_LV=vg_hpdl380g1002/lv_swap  KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM console=ttyS0
>PID hash table entries: 4096 (order: 3, 32768 bytes)
>Memory: 847780k/1048432k available (5520k kernel code, 392k absent, 200260k reserved, 6909k data, 1340k init)
>Kernel/User page tables isolation: enabled
>Hierarchical RCU implementation.
>NR_IRQS:33024 nr_irqs:664
>Console: colour VGA+ 80x25
>console [ttyS0] enabled
>allocated 4194304 bytes of page_cgroup
>please try 'cgroup_disable=memory' option if you don't want memory cgroups
>Detected 2903.998 MHz processor.
>Calibrating delay loop (skipped) preset value.. 5807.99 BogoMIPS (lpj=2903998)
>pid_max: default: 32768 minimum: 301
>Security Framework initialized
>SELinux:  Initializing.
>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
>Mount-cache hash table entries: 256
>Initializing cgroup subsys ns
>Initializing cgroup subsys cpuacct
>Initializing cgroup subsys memory
>Initializing cgroup subsys devices
>Initializing cgroup subsys freezer
>Initializing cgroup subsys net_cls
>Initializing cgroup subsys blkio
>Initializing cgroup subsys perf_event
>Initializing cgroup subsys net_prio
>CPU: Physical Processor ID: 0
>mce: CPU supports 10 MCE banks
>Speculative Store Bypass: Vulnerable
>FEATURE SPEC_CTRL Not Present
>FEATURE IBPB_SUPPORT Not Present
>Spectre V2 : Mitigation: Full retpoline
>alternatives: switching to unfair spinlock
>SMP alternatives: switching to UP code
>ACPI: Core revision 20090903
>ftrace: converting mcount calls to 0f 1f 44 00 00
>ftrace: allocating 22051 entries in 87 pages
>Enabling x2apic
>Enabled x2apic
>APIC routing finalized to physical x2apic.
>..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>CPU0: Intel QEMU Virtual CPU version 2.5+ stepping 03
>Performance Events: Broken PMU hardware detected, using software events only.
>NMI watchdog disabled (cpu0): hardware events not enabled
>Brought up 1 CPUs
>Total of 1 processors activated (5807.99 BogoMIPS).
>devtmpfs: initialized
>regulator: core version 0.5
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1 for base access
>bio: create slab <bio-0> at 0
>ACPI: Interpreter enabled
>ACPI: (supports S0 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: No dock devices found.
>PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
>ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
>pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
>pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
>pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfebfffff]
>pci_root PNP0A03:00: host bridge window [mem 0x100000000-0x17fffffff]
>PCI host bridge to bus 0000:00
>pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
>pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
>pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
>pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
>pci_bus 0000:00: root bus resource [mem 0x100000000-0x17fffffff]
>pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
>pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
>ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
>ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
>vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>vgaarb: loaded
>vgaarb: bridge control possible 0000:00:02.0
>SCSI subsystem initialized
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Switching to clocksource kvm-clock
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
>TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>NET: Registered protocol family 1
>pci 0000:00:00.0: Limiting direct PCI/PCI transfers
>pci 0000:00:01.0: PIIX3: Enabling Passive Release
>pci 0000:00:01.0: Activating ISA DMA hang workarounds
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>pci 0000:00:01.2: PCI INT D disabled
>Trying to unpack rootfs image as initramfs...
>Freeing initrd memory: 33415k freed
>sha256_ssse3: Neither AVX nor SSSE3 is available/usable.
>futex hash table entries: 8192 (order: 7, 524288 bytes)
>audit: initializing netlink socket (disabled)
>type=2000 audit(1537450415.629:1): initialized
>HugeTLB registered 2 MB page size, pre-allocated 0 pages
>VFS: Disk quotas dquot_6.5.2
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>msgmni has been set to 1721
>ksign: Installing public key data
>Loading keyring
>- Added public key 509B2AC861A75025
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>- Added public key D4A26C9CCD09BEDA
>- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
>- Added public key CB445E0DA3EA1F65
>- User ID: Red Hat Enterprise Linux Driver Update Program (key 4) <secalert@redhat.com>
>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>pciehp: PCI Express Hot Plug Controller Driver version: 0.4
>acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
>acpiphp: Slot [3] registered
>acpiphp: Slot [4] registered
>acpiphp: Slot [5] registered
>acpiphp: Slot [6] registered
>acpiphp: Slot [7] registered
>acpiphp: Slot [8] registered
>acpiphp: Slot [9] registered
>acpiphp: Slot [10] registered
>acpiphp: Slot [11] registered
>acpiphp: Slot [12] registered
>acpiphp: Slot [13] registered
>acpiphp: Slot [14] registered
>acpiphp: Slot [15] registered
>acpiphp: Slot [16] registered
>acpiphp: Slot [17] registered
>acpiphp: Slot [18] registered
>acpiphp: Slot [19] registered
>acpiphp: Slot [20] registered
>acpiphp: Slot [21] registered
>acpiphp: Slot [22] registered
>acpiphp: Slot [23] registered
>acpiphp: Slot [24] registered
>acpiphp: Slot [25] registered
>acpiphp: Slot [26] registered
>acpiphp: Slot [27] registered
>acpiphp: Slot [28] registered
>acpiphp: Slot [29] registered
>acpiphp: Slot [30] registered
>acpiphp: Slot [31] registered
>input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
>ACPI: Power Button [PWRF]
>[Firmware Bug]: No valid trip found
>GHES: HEST is not enabled!
>Non-volatile memory driver v1.3
>Linux agpgart interface v0.103
>crash memory driver: version 1.1
>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
>ï¿½serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>brd: module loaded
>loop: module loaded
>input: Macintosh mouse button emulation as /devices/virtual/input/input1
>Fixed MDIO Bus: probed
>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>uhci_hcd: USB Universal Host Controller Interface driver
>uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>uhci_hcd 0000:00:01.2: UHCI Host Controller
>uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
>usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: UHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.32-754.el6.x86_64 uhci_hcd
>usb usb1: SerialNumber: 0000:00:01.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
>rtc_cmos 00:01: RTC can wake from S4
>rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one day, y3k, 114 bytes nvram
>cpuidle: using governor ladder
>cpuidle: using governor menu
>EFI Variables Facility v0.08 2004-May-17
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>usbhid: v2.6:USB HID core driver
>GRE over IPv4 demultiplexor driver
>TCP cubic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 17
>registered taskstats version 1
>rtc_cmos 00:01: setting system clock to 2018-09-20 13:33:36 UTC (1537450416)
>Initalizing network drop monitor service
>Freeing unused kernel memory: 1340k freed
>Write protecting the kernel read-only data: 10240k
>Freeing unused kernel memory: 604k freed
>Freeing unused kernel memory: 1528k freed
>dracut: dracut-004-411.el6
>dracut: rd_NO_LUKS: removing cryptoluks activation
>device-mapper: uevent: version 1.0.3
>device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
>udev: starting version 147
>dracut: Starting plymouth daemon
>dracut: rd_NO_DM: removing DM RAID activation
>dracut: rd_NO_MD: removing MD RAID activation
>usb 1-1: new full speed USB device number 2 using uhci_hcd
>scsi0 : ata_piix
>scsi1 : ata_piix
>ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0e0 irq 14
>ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0e8 irq 15
>Loading iSCSI transport class v2.0-870.
>usb 1-1: New USB device found, idVendor=0627, idProduct=0001
>usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
>usb 1-1: Product: QEMU USB Tablet
>usb 1-1: Manufacturer: QEMU
>usb 1-1: SerialNumber: 42
>usb 1-1: configuration #1 chosen from 1 choice
>input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
>generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
>ata1.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
>ata1.00: configured for MWDMA2
>scsi 0:0:0:0: CD-ROM            QEMU     QEMU DVD-ROM     2.5+ PQ: 0 ANSI: 5
>iscsi: registered transport (qla4xxx)
>QLogic iSCSI HBA Driver
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
>virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 11 (level, high) -> IRQ 11
>input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
>Refined TSC clocksource calibration: 2904.096 MHz.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray
>Uniform CD-ROM driver Revision: 3.20
> vda: vda1 vda2
>libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
>libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
>Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
>iscsi: registered transport (cxgb3i)
>Chelsio T4/T5 iSCSI Driver cxgb4i v0.9.4
>iscsi: registered transport (cxgb4i)
>cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
>QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
>iscsi: registered transport (bnx2i)
>iscsi: registered transport (be2iscsi)
>In beiscsi_module_init, tt=ffffffffa0305940
>dracut: Scanning devices vda2  for LVM logical volumes rhel_hp-dl380g10-02/swap vg_hpdl380g1002/lv_root vg_hpdl380g1002/lv_swap 
>dracut: inactive '/dev/vg_hpdl380g1002/lv_root' [50.00 GiB] inherit
>dracut: inactive '/dev/vg_hpdl380g1002/lv_home' [492.80 GiB] inherit
>dracut: inactive '/dev/vg_hpdl380g1002/lv_swap' [15.59 GiB] inherit
>dracut: Volume group "rhel_hp-dl380g10-02" not found
>dracut: Cannot process volume group rhel_hp-dl380g10-02
>dracut: Scanning devices vda2  for LVM logical volumes rhel_hp-dl380g10-02/swap vg_hpdl380g1002/lv_root vg_hpdl380g1002/lv_swap 
>dracut: ACTIVE '/dev/vg_hpdl380g1002/lv_root' [50.00 GiB] inherit
>dracut: inactive '/dev/vg_hpdl380g1002/lv_home' [492.80 GiB] inherit
>dracut: ACTIVE '/dev/vg_hpdl380g1002/lv_swap' [15.59 GiB] inherit
>dracut: PARTIAL MODE. Incomplete logical volumes will be processed.
>dracut: Volume group "rhel_hp-dl380g10-02" not found
>dracut: Cannot process volume group rhel_hp-dl380g10-02
>dracut Warning: No root device "block:/dev/mapper/vg_hpdl380g1002-lv_root" found
>
>
>
>
>dracut Warning: LVM rhel_hp-dl380g10-02/swap not found
>
>dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
>
>
>dracut Warning: Signal caught!
>dracut Warning: LVM rhel_hp-dl380g10-02/swap not found
>
>dracut Warning: Boot has failed. To debug this issue add "rdshell" to the kernel command line.
>Kernel panic - not syncing: Attempted to kill init!
>Pid: 1, comm: init Not tainted 2.6.32-754.el6.x86_64 #1
>Call Trace:
> [<ffffffff8155344d>] ? panic+0xa7/0x18b
> [<ffffffff8112e250>] ? perf_event_exit_task+0xc0/0x340
> [<ffffffff810845f3>] ? do_exit+0x853/0x860
> [<ffffffff8119f2b5>] ? fput+0x25/0x30
> [<ffffffff81084658>] ? do_group_exit+0x58/0xd0
> [<ffffffff810846e7>] ? sys_exit_group+0x17/0x20
> [<ffffffff8155f3cb>] ? system_call_fastpath+0x2f/0x34
>

Actions: View

Attachments on bug 1627676: 1482315 | 1485151