Attachment 148847 Details for Bug 230181 – dmesg

dmesg

dmesg.log (text/plain), 16.00 KB, created by Jack Neely on 2007-02-27 05:42:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jack Neely

Created: 2007-02-27 05:42:26 UTC

Size: 16.00 KB

patch

obsolete

>capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
><7>CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00000400 00000000 00000000
><6>CPU: Trace cache: 12K uops, L1 D cache: 8K
><6>CPU: L2 cache: 512K
><6>CPU: Hyper-Threading is disabled
><7>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00000080 00000400 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>ACPI: Core revision 20060707
><4>CPU0: Intel(R) Pentium(R) 4 CPU 2.66GHz stepping 07
><6>Total of 1 processors activated (5320.11 BogoMIPS).
><4>ENABLING IO-APIC IRQs
><6>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
><6>Brought up 1 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=32 bytes
><7>sizeof(inode)=424 bytes
><7>sizeof(dentry)=148 bytes
><7>sizeof(ext3inode)=600 bytes
><7>sizeof(buffer_head)=52 bytes
><7>sizeof(skbuff)=172 bytes
><7>sizeof(task_struct)=1392 bytes
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5802k freed
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfbe6d, last bus=2
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><6>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
><4>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
><4>* this clock source is slow. If you are sure your timer does not have
><4>* this bug, please use "acpi_pm_good" to disable the workaround
><4>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
><4>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
><6>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
><7>Boot video device is 0000:01:00.0
><4>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 15)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 15)
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 11 devices
><6>usbcore: registered new driver usbfs
><6>usbcore: registered new driver hub
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>pnp: 00:0a: ioport range 0x800-0x85f could not be reserved
><6>pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved
><6>pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: e000-efff
><6>  MEM window: ff800000-ff9fffff
><6>  PREFETCH window: f0000000-f7ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: d000-dfff
><6>  MEM window: ff600000-ff7fffff
><6>  PREFETCH window: 50000000-500fffff
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
><4>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
><6>TCP: Hash tables configured (established 131072 bind 65536)
><6>TCP reno registered
><4>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
><6>Simple Boot Flag at 0x7a set to 0x1
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1172553197.864:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><6>Initializing Cryptographic API
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EAA0802BFF323905
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><4>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
><3>ACPI: Getting cpuindex for acpiid 0x2
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.101 (c) Dave Jones
><6>agpgart: Detected an Intel 845G Chipset.
><6>agpgart: AGP aperture is 128M @ 0xe8000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
><6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
><6>ICH4: IDE controller at PCI slot 0000:00:1f.1
><4>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 169
><6>ICH4: chipset revision 1
><6>ICH4: not 100% native mode: will probe irqs later
><6>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
><7>Probing IDE interface ide1...
><4>hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive
><4>hdd: HL-DT-ST GCE-8400B, ATAPI CD/DVD-ROM drive
><4>ide1 at 0x170-0x177,0x376 on irq 15
><7>Probing IDE interface ide0...
><4>ide-floppy driver 0.99.newide
><6>usbcore: registered new driver libusual
><6>usbcore: registered new driver hiddev
><6>usbcore: registered new driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
><4>PNP: PS/2 controller doesn't have AUX irq; using default 12
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>mice: PS/2 mouse device common for all mice
><6>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
><6>md: bitmap version 4.39
><6>TCP bic registered
><6>Initializing IPsec netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>Freeing unused kernel memory: 240k freed
><4>Write protecting the kernel read-only data: 370k
><6>Time: tsc clocksource has been installed.
><6>input: AT Translated Set 2 keyboard as /class/input/input0
><5>FS-Cache: Loaded
><4>FS-Cache: netfs 'nfs' registered for caching
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
><6>input: PC Speaker as /class/input/input1
><6>squashfs: version 3.1 (2006/08/09) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>IPv6 over IPv4 tunneling driver
><6>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
><6>Uniform CD-ROM driver Revision: 3.20
><6>hdd: ATAPI 40X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 177, io mem 0xffa20000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 6 ports detected
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 185
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 185, io base 0x0000ff80
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 193, io base 0x0000ff60
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 169
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 169, io base 0x0000ff40
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>usb 2-2: new low speed USB device using uhci_hcd and address 2
><6>usb 2-2: configuration #1 chosen from 1 choice
><6>input: Logitech USB Optical Mouse as /class/input/input2
><6>input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-2
><7>libata version 2.00 loaded.
><7>sata_promise 0000:02:01.0: version 1.04
><6>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 201
><6>ata1: SATA max UDMA/133 cmd 0xF8882200 ctl 0xF8882238 bmdma 0x0 irq 201
><6>ata2: SATA max UDMA/133 cmd 0xF8882280 ctl 0xF88822B8 bmdma 0x0 irq 201
><6>ata3: SATA max UDMA/133 cmd 0xF8882300 ctl 0xF8882338 bmdma 0x0 irq 201
><6>ata4: SATA max UDMA/133 cmd 0xF8882380 ctl 0xF88823B8 bmdma 0x0 irq 201
><6>scsi0 : sata_promise
><6>ata1: SATA link down (SStatus 0 SControl 300)
><6>scsi1 : sata_promise
><6>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
><6>ata2.00: configured for UDMA/133
><6>scsi2 : sata_promise
><6>ata3: SATA link down (SStatus 0 SControl 300)
><6>scsi3 : sata_promise
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
><6>ata4.00: configured for UDMA/133
><5>  Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2
><5>sd 1:0:0:0: Attached scsi disk sda
><5>  Vendor: ATA       Model: ST3320620AS       Rev: 3.AA
><5>  Type:   Direct-Access                      ANSI SCSI revision: 05
><5>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><5>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb: sdb1 sdb2
><5>sd 3:0:0:0: Attached scsi disk sdb
><6>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
><6>e100: Copyright(c) 1999-2005 Intel Corporation
><6>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 209
><6>e100: eth0: e100_probe: addr 0xff6fe000, irq 209, MAC addr 00:07:E9:D6:9C:60
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><6>security:  3 users, 6 roles, 1560 types, 166 bools, 1 sens, 1024 cats
><6>security:  58 classes, 48173 rules
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev hdc, type iso9660), uses genfs_contexts
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1172553414.673:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  3492.000 MB/sec
><4>raid5: using function: pIII_sse (3492.000 MB/sec)
><4>raid6: int32x1    765 MB/s
><4>raid6: int32x2    834 MB/s
><4>raid6: int32x4    814 MB/s
><4>raid6: int32x8    810 MB/s
><4>raid6: mmxx1     2022 MB/s
><4>raid6: mmxx2     2274 MB/s
><4>raid6: sse1x1    1094 MB/s
><4>raid6: sse1x2    1833 MB/s
><4>raid6: sse2x1    1940 MB/s
><4>raid6: sse2x2    2606 MB/s
><4>raid6: using algorithm sse2x2 (2606 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Oct 16 2006 15:01:18) installed
><6>Lock_Nolock (built Oct 16 2006 15:02:21) installed
><6>JFS: nTxBlock = 8082, nTxLock = 64657
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.4 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1172553423.138:3): audit_pid=627 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><5>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
><5>sdb: Write Protect is off
><7>sdb: Mode Sense: 00 3a 00 00
><5>SCSI device sdb: drive cache: write back
><6> sdb: sdb1 sdb2
><5>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: drive cache: write back
><6> sda: sda1 sda2
><6>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
><7>eth0: no IPv6 routers present

Actions: View

Attachments on bug 230181: 148846 | 148847 | 148948 | 148949