Attachment 149176 Details for Bug 230836 – output of lspci -vv

output of lspci -vv

lspci.output (text/plain), 10.64 KB, created by Bernd Bartmann on 2007-03-03 12:25:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernd Bartmann

Created: 2007-03-03 12:25:02 UTC

Size: 10.64 KB

patch

obsolete

>00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
>	Subsystem: VIA Technologies, Inc. Unknown device 0000
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 8
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Capabilities: [80] AGP version 3.5
>		Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Memory behind bridge: dbe00000-dfefffff
>	Prefetchable memory behind bridge: bbd00000-dbcfffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:06.0 SCSI storage controller: Adaptec AHA-2940/2940W / AIC-7871 (rev 03)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 2000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at ec00 [disabled] [size=256]
>	Region 1: Memory at dffff000 (32-bit, non-prefetchable) [size=4K]
>	Expansion ROM at dffe0000 [disabled] [size=64K]
>
>00:0b.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 590c
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (16000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 5
>	Region 0: Memory at dffd0000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
>		Address: 7e8c5c5aba0bb90c  Data: 4317
>
>00:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46) (prog-if 10 [OHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 590d
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 10
>	Region 0: Memory at dfff7800 (32-bit, non-prefetchable) [size=2K]
>	Region 1: I/O ports at e800 [size=128]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin B routed to IRQ 10
>	Region 0: I/O ports at e400 [size=8]
>	Region 1: I/O ports at e000 [size=4]
>	Region 2: I/O ports at dc00 [size=8]
>	Region 3: I/O ports at d800 [size=4]
>	Region 4: I/O ports at d400 [size=16]
>	Region 5: I/O ports at d000 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin A routed to IRQ 11
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
>	Region 4: I/O ports at fc00 [size=16]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at c000 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at c400 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at c800 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 10
>	Region 4: I/O ports at cc00 [size=32]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32, Cache Line Size: 64 bytes
>	Interrupt: pin C routed to IRQ 5
>	Region 0: Memory at dfffee00 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
>	Subsystem: VIA Technologies, Inc. Unknown device 0000
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
>	Subsystem: Micro-Star International Co., Ltd. Unknown device 5901
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin C routed to IRQ 5
>	Region 0: I/O ports at bc00 [size=256]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:00.0 VGA compatible controller: nVidia Corporation G73 [GeForce 7600 GS] (rev a2) (prog-if 00 [VGA])
>	Subsystem: Giga-byte Technology Unknown device 3428
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (1250ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at c0000000 (32-bit, prefetchable) [size=256M]
>	Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
>	Expansion ROM at dfee0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [44] AGP version 3.0
>		Status: RQ=256 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
>		Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>

Actions: View

Attachments on bug 230836: 149173 | 149174 | 149175 | 149176