Attachment 149177 Details for Bug 230838 – Output from running dmesg

Output from running dmesg

dmesg_out (text/plain), 63.43 KB, created by Gerald Cox on 2007-03-03 13:14:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gerald Cox

Created: 2007-03-03 13:14:36 UTC

Size: 63.43 KB

patch

obsolete

>Linux version 2.6.19-1.2911.6.4.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 24 14:03:48 EST 2007
>Command line: ro root=LABEL=/ noapic rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000e8000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f68c0
>ACPI: RSDT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x000000007fff3000
>ACPI: FADT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x000000007fff3040
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x00000001  LTP 0x00000001) @ 0x000000007fff8240
>ACPI: MCFG (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x000000007fff8500
>ACPI: MADT (v001 GBT    NVDAACPI 0x42302e31 NVDA 0x01010101) @ 0x000000007fff81c0
>ACPI: DSDT (v001 GBT    NVDAACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007fff0000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   524272
>On node 0 totalpages: 524174
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1449 pages reserved
>  DMA zone: 2485 pages, LIFO batch:0
>  DMA32 zone: 8127 pages used for memmap
>  DMA32 zone: 512049 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to physical flat
>Processors: 2
>Nosave address range: 000000000009e000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514534
>Kernel command line: ro root=LABEL=/ noapic rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 7f9c000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2052984k/2097088k available (2469k kernel code, 43712k reserved, 1938k data, 312k init)
>Calibrating delay using timer specific routine.. 5226.56 BogoMIPS (lpj=2613283)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 8ca0)
>Using local APIC timer interrupts.
>result 12558176
>Detected 12.558 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>spurious 8259A interrupt: IRQ7.
>Calibrating delay using timer specific routine.. 5126.26 BogoMIPS (lpj=2563133)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 2 cycles, maxerr 543 cycles)
>Brought up 2 CPUs
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 2612.102 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>migration_cost=339
>checking if image is initramfs... it is
>Freeing initrd memory: 1576k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>PCI: No mmconfig possible on device 00:18
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:0e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-DMA: Disabling IOMMU.
>pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: 6000-6fff
>  MEM window: f0000000-f1ffffff
>  PREFETCH window: e8000000-efffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: f2000000-f6ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:15.0
>  IO window: 7000-8fff
>  MEM window: f9000000-f90fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:16.0
>  IO window: 9000-9fff
>  MEM window: f7000000-f8ffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1172925434.053:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CE8B9002C3DE883F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie03]
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:15.0:pcie00]
>Allocate Port Service[0000:00:15.0:pcie03]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>Allocate Port Service[0000:00:16.0:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
>NFORCE-MCP55: chipset revision 161
>NFORCE-MCP55: not 100% native mode: will probe irqs later
>NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>hda: Optiarc DVD RW AD-7170A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>JMB363: IDE controller at PCI slot 0000:03:00.0
>ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK8] -> GSI 5 (level, low) -> IRQ 5
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 5
>JMB363: port 0x01f0 already claimed by ide0
>JMB363: dma_base is invalid
>ide1: JMB363 Bus-Master DMA disabled (BIOS)
>Probing IDE interface ide1...
>JMB363: IDE controller at PCI slot 0000:03:00.1
>PCI: Enabling device 0000:03:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 11
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>    ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio
>    ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:DMA, hdh:DMA
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>hdg: ST3320620NS, ATA DISK drive
>hdg: set_drive_speed_status: status=0x58 { DriveReady SeekComplete DataRequest }
>ide3 at 0x7800-0x7807,0x7c02 on irq 11
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>hdg: max request size: 512KiB
>hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: 0x27
>hdg: drive not ready for command
>hdg: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63, UDMA(133)
>hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: 0xef
>hdg: drive not ready for command
>hdg: cache flushes supported
> hdg:hdg: status error: status=0x58 { DriveReady SeekComplete DataRequest }
>ide: failed opcode was: unknown
>hdg: drive not ready for command
> hdg1
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xa
>powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xc
>powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xe
>powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 494k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0a.0: irq 11, io mem 0xf9105000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 15
>PCI: setting IRQ 15 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0a.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
>ehci_hcd 0000:00:0a.1: irq 15, io mem 0xf9106000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:0d.0: version 2.0
>ACPI: PCI Interrupt Link [LSID] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LSID] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ata1: SATA max UDMA/133 cmd 0xA000 ctl 0xA402 bmdma 0xB000 irq 10
>ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xAC02 bmdma 0xB008 irq 10
>scsi0 : sata_nv
>usb 2-9: new high speed USB device using ehci_hcd and address 2
>usb 2-9: configuration #1 chosen from 1 choice
>hub 2-9:1.0: USB hub found
>hub 2-9:1.0: 4 ports detected
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 625140335 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>usb 2-9.3: new full speed USB device using ehci_hcd and address 4
>ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>sd 1:0:0:0: Attached scsi disk sdb
>ACPI: PCI Interrupt Link [LFID] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LFID] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:0d.1 to 64
>ata3: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 11
>ata4: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 11
>scsi2 : sata_nv
>usb 2-9.3: configuration #1 chosen from 1 choice
>usb 2-9.4: new high speed USB device using ehci_hcd and address 5
>usb 2-9.4: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : sata_nv
>usb 1-10: new low speed USB device using ohci_hcd and address 2
>usb 1-10: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-10
>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata4.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata4.00: ata4: dev 0 multi count 16
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
> sdc: sdc1
>sd 2:0:0:0: Attached scsi disk sdc
>scsi 3:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
> sdd: sdd1
>sd 3:0:0:0: Attached scsi disk sdd
>ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LSA2] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:0d.2 to 64
>ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xCC02 bmdma 0xD800 irq 15
>ata6: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xD808 irq 15
>scsi4 : sata_nv
>ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata5.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata5.00: ata5: dev 0 multi count 16
>ata5.00: configured for UDMA/133
>scsi5 : sata_nv
>ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata6.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata6.00: ata6: dev 0 multi count 16
>ata6.00: configured for UDMA/133
>scsi 4:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
>SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
> sde: sde1
>sd 4:0:0:0: Attached scsi disk sde
>scsi 5:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
>SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
> sdf: sdf1 sdf2 sdf3
>sd 5:0:0:0: Attached scsi disk sdf
>sata_sil24 0000:04:00.0: version 0.3
>ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNK7] -> GSI 7 (level, low) -> IRQ 7
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>ata7: SATA max UDMA/100 cmd 0xFFFFC20000028000 ctl 0x0 bmdma 0x0 irq 7
>ata8: SATA max UDMA/100 cmd 0xFFFFC2000002A000 ctl 0x0 bmdma 0x0 irq 7
>scsi6 : sata_sil24
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata7.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
>ata7.00: ata7: dev 0 multi count 16
>ata7.00: configured for UDMA/100
>scsi7 : sata_sil24
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata8.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 31/32)
>ata8.00: ata8: dev 0 multi count 16
>ata8.00: configured for UDMA/100
>scsi 6:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdg: 625142448 512-byte hdwr sectors (320073 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 00 3a 00 00
>SCSI device sdg: drive cache: write back
>SCSI device sdg: 625142448 512-byte hdwr sectors (320073 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 00 3a 00 00
>SCSI device sdg: drive cache: write back
> sdg: sdg1
>sd 6:0:0:0: Attached scsi disk sdg
>scsi 7:0:0:0: Direct-Access     ATA      ST3320620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdh: 625142448 512-byte hdwr sectors (320073 MB)
>sdh: Write Protect is off
>sdh: Mode Sense: 00 3a 00 00
>SCSI device sdh: drive cache: write back
>SCSI device sdh: 625142448 512-byte hdwr sectors (320073 MB)
>sdh: Write Protect is off
>sdh: Mode Sense: 00 3a 00 00
>SCSI device sdh: drive cache: write back
> sdh: sdh1
>sd 7:0:0:0: Attached scsi disk sdh
>Initializing USB Mass Storage driver...
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 8:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
>sd 8:0:0:0: Attached scsi removable disk sdi
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1172925451.634:2): selinux=0 auid=4294967295
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0803
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>ieee1394: Initialized config rom entry `ip1394'
>EDAC MC: Ver: 2.0.1 Feb 24 2007
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>forcedeth: using HIGHDMA
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 2:0:0:0: Attached scsi generic sg2 type 0
>sd 3:0:0:0: Attached scsi generic sg3 type 0
>sd 4:0:0:0: Attached scsi generic sg4 type 0
>sd 5:0:0:0: Attached scsi generic sg5 type 0
>sd 6:0:0:0: Attached scsi generic sg6 type 0
>sd 7:0:0:0: Attached scsi generic sg7 type 0
>sd 8:0:0:0: Attached scsi generic sg8 type 0
>usbcore: registered new interface driver snd-usb-audio
>Linux video capture interface: v2.00
>input: PC Speaker as /class/input/input2
>eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:10.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80
>cannot find the slot for index 0 (range 0-0)
>hda-intel: Error creating card!
>HDA Intel: probe of 0000:00:0e.1 failed with error -12
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 7
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [LNK3] -> GSI 7 (level, low) -> IRQ 7
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[7]  MMIO=[f6004000-f60047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>pwc: Unknown parameter `index'
>pwc: Unknown parameter `index'
>pwc: Unknown parameter `index'
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>cx2388x v4l2 driver version 0.0.6 loaded
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected]
>TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe
>cx2388x dvb driver version 0.0.6 loaded
>cx2388x alsa driver version 0.0.6 loaded
>cx88[0]/0: found at 0000:02:07.0, rev: 5, irq: 10, latency: 32, mmio: 0xf2000000
>tuner 2-0043: chip found @ 0x86 (cx88[0])
>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 2-0061: chip found @ 0xc2 (cx88[0])
>tuner 2-0061: type set to 64 (LG TDVS-H06xF)
>tuner 2-0061: type set to 64 (LG TDVS-H06xF)
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>ACPI: PCI Interrupt 0000:02:07.2[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>cx88[0]/2: found at 0000:02:07.2, rev: 5, irq: 10, latency: 32, mmio: 0xf4000000
>cx88[0]/2: cx2388x based dvb card
>DVB: registering new adapter (cx88[0]).
>DVB: registering frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
>ACPI: PCI Interrupt 0000:02:07.1[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
>cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
>cx2388x blackbird driver version 0.0.6 loaded
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0016e60000bee0e4]
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: invalid raid superblock magic on hdg1
>md: hdg1 has invalid sb, not importing!
>md: invalid raid superblock magic on sda1
>md: sda1 has invalid sb, not importing!
>md: invalid raid superblock magic on sdb1
>md: sdb1 has invalid sb, not importing!
>md: invalid raid superblock magic on sdc1
>md: sdc1 has invalid sb, not importing!
>md: invalid raid superblock magic on sdd1
>md: sdd1 has invalid sb, not importing!
>md: invalid raid superblock magic on sde1
>md: sde1 has invalid sb, not importing!
>md: invalid raid superblock magic on sdh1
>md: sdh1 has invalid sb, not importing!
>md: autorun ...
>md: considering sdg1 ...
>md:  adding sdg1 ...
>md: created md0
>md: bind<sdg1>
>md: running: <sdg1>
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  7912.000 MB/sec
>raid5: using function: generic_sse (7912.000 MB/sec)
>raid6: int64x1   2332 MB/s
>raid6: int64x2   2847 MB/s
>raid6: int64x4   2199 MB/s
>raid6: int64x8   2261 MB/s
>raid6: sse2x1    3562 MB/s
>raid6: sse2x2    4750 MB/s
>raid6: sse2x4    4886 MB/s
>raid6: using algorithm sse2x4 (4886 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>raid5: device sdg1 operational as raid disk 0
>raid5: not enough operational devices for md0 (8/9 failed)
>RAID5 conf printout:
> --- rd:9 wd:1
> disk 0, o:1, dev:sdg1
>raid5: failed to run raid set md0
>md: pers->run() failed ...
>md: do_md_run() returned -5
>md: md0 stopped.
>md: unbind<sdg1>
>md: export_rdev(sdg1)
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sdf2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdf1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2056312k swap on /dev/sdf3.  Priority:-1 extents:1 across:2056312k
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata1: EH complete
>SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 625140335 512-byte hdwr sectors (320072 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata2: EH complete
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata3.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata3: EH complete
>SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 625142448 512-byte hdwr sectors (320073 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata4.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata4: EH complete
>SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 625142448 512-byte hdwr sectors (320073 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata5.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata5: EH complete
>SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
>SCSI device sde: 625142448 512-byte hdwr sectors (320073 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: drive cache: write back
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata6.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error)
>ata6: EH complete
>SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
>SCSI device sdf: 625142448 512-byte hdwr sectors (320073 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 00 3a 00 00
>SCSI device sdf: drive cache: write back
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>irq 7: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> [<ffffffff8026999a>] show_trace+0x34/0x47
> [<ffffffff802699bf>] dump_stack+0x12/0x17
> [<ffffffff802b798c>] __report_bad_irq+0x30/0x7d
> [<ffffffff802b7b96>] note_interrupt+0x1bd/0x200
> [<ffffffff802b8616>] handle_level_irq+0xc7/0x104
> [<ffffffff8026aba8>] do_IRQ+0x10e/0x15f
> [<ffffffff8025c641>] ret_from_intr+0x0/0xa
> [<ffffffff802691f2>] default_idle+0x2c/0x4a
> [<ffffffff802476ca>] cpu_idle+0x8b/0xae
> [<ffffffff802747f4>] start_secondary+0x462/0x471
>
>handlers:
>[<ffffffff880b7362>] (sil24_interrupt+0x0/0x3a9 [sata_sil24])
>[<ffffffff8821dc22>] (ohci_irq_handler+0x0/0x766 [ohci1394])
>Disabling IRQ #7
>IPv6 over IPv4 tunneling driver
>ata7.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
>ata7.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 err 0x0 (timeout)
>ata7: soft resetting port
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata7.00: qc timeout (cmd 0xec)
>ata7.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata7.00: revalidation failed (errno=-5)
>ata7: failed to recover some devices, retrying in 5 secs
>ata7: hard resetting port
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ATA: abnormal status 0xEC on port 0xFFFFC20000028007
>ATA: abnormal status 0xEC on port 0xFFFFC20000028007
>ata7.00: qc timeout (cmd 0xec)
>ata7.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata7.00: revalidation failed (errno=-5)
>ata7: failed to recover some devices, retrying in 5 secs
>ata7: hard resetting port
>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ATA: abnormal status 0xEC on port 0xFFFFC20000028007
>ATA: abnormal status 0xEC on port 0xFFFFC20000028007
>ata7.00: qc timeout (cmd 0xec)
>ata7.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata7.00: revalidation failed (errno=-5)
>ata7.00: disabled
>ata7: EH complete
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>Buffer I/O error on device sdg, logical block 3
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 8
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>ata8.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
>ata8.00: tag 0 cmd 0x60 Emask 0x4 stat 0x40 err 0x0 (timeout)
>ata8: soft resetting port
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata8.00: qc timeout (cmd 0xec)
>ata8.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata8.00: revalidation failed (errno=-5)
>ata8: failed to recover some devices, retrying in 5 secs
>ata8: hard resetting port
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ATA: abnormal status 0xEC on port 0xFFFFC2000002A007
>ATA: abnormal status 0xEC on port 0xFFFFC2000002A007
>ata8.00: qc timeout (cmd 0xec)
>ata8.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata8.00: revalidation failed (errno=-5)
>ata8: failed to recover some devices, retrying in 5 secs
>ata8: hard resetting port
>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ATA: abnormal status 0xEC on port 0xFFFFC2000002A007
>ATA: abnormal status 0xEC on port 0xFFFFC2000002A007
>ata8.00: qc timeout (cmd 0xec)
>ata8.00: failed to IDENTIFY (I/O error, err_mask=0x104)
>ata8.00: revalidation failed (errno=-5)
>ata8.00: disabled
>ata8: EH complete
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>printk: 2 messages suppressed.
>Buffer I/O error on device sdh, logical block 0
>Buffer I/O error on device sdh, logical block 1
>Buffer I/O error on device sdh, logical block 2
>Buffer I/O error on device sdh, logical block 3
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>Buffer I/O error on device sdh, logical block 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>Buffer I/O error on device sdh, logical block 78142805
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>Buffer I/O error on device sdh, logical block 78142805
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>Buffer I/O error on device sdh, logical block 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 8
>Buffer I/O error on device sdh, logical block 1
>Buffer I/O error on device sdh, logical block 2
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>printk: 2 messages suppressed.
>Buffer I/O error on device sdg, logical block 0
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>Buffer I/O error on device sdg, logical block 3
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 8
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 8
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>printk: 14 messages suppressed.
>Buffer I/O error on device sdg1, logical block 0
>Buffer I/O error on device sdg1, logical block 1
>Buffer I/O error on device sdg1, logical block 2
>Buffer I/O error on device sdg1, logical block 3
>Buffer I/O error on device sdg1, logical block 4
>Buffer I/O error on device sdg1, logical block 5
>Buffer I/O error on device sdg1, logical block 6
>Buffer I/O error on device sdg1, logical block 7
>Buffer I/O error on device sdg1, logical block 8
>Buffer I/O error on device sdg1, logical block 9
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>printk: 32 messages suppressed.
>Buffer I/O error on device sdh1, logical block 0
>Buffer I/O error on device sdh1, logical block 1
>Buffer I/O error on device sdh1, logical block 2
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>printk: 39 messages suppressed.
>Buffer I/O error on device sdh, logical block 0
>Buffer I/O error on device sdh, logical block 1
>Buffer I/O error on device sdh, logical block 2
>Buffer I/O error on device sdh, logical block 3
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>Buffer I/O error on device sdh, logical block 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>Buffer I/O error on device sdh, logical block 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137215
>Buffer I/O error on device sdh1, logical block 312568576
>Buffer I/O error on device sdh1, logical block 312568577
>Buffer I/O error on device sdh1, logical block 312568578
>Buffer I/O error on device sdh1, logical block 312568579
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137215
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137217
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137279
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137281
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137327
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137329
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625137343
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 63
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 65
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 8
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137215
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137215
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137217
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137219
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137279
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137281
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137327
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137329
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625137343
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 63
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 65
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 8
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>eth0: no IPv6 routers present
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>printk: 286 messages suppressed.
>Buffer I/O error on device sdg, logical block 0
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>Buffer I/O error on device sdg, logical block 3
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 625142440
>Buffer I/O error on device sdg, logical block 78142805
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>Buffer I/O error on device sdg, logical block 0
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 8
>Buffer I/O error on device sdg, logical block 1
>Buffer I/O error on device sdg, logical block 2
>sd 6:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdg, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 625142440
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 8
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 16
>sd 7:0:0:0: SCSI error: return code = 0x00040000
>end_request: I/O error, dev sdh, sector 0

Actions: View

Attachments on bug 230838: 149177 | 151367