Attachment 149229 Details for Bug 229621 – 2.6.20-1.2962.fc7 booting with only 'acpi=off' - no disks

2.6.20-1.2962.fc7 booting with only 'acpi=off' - no disks

syslog (text/plain), 30.31 KB, created by Michal Jaegermann on 2007-03-05 00:26:36 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2007-03-05 00:26:36 UTC

Size: 30.31 KB

patch

obsolete

><5>Linux version 2.6.20-1.2962.fc7 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20070222 (Red Hat 4.1.2-3)) #1 SMP Fri Mar 2 19:00:23 EST 2007
><6>Command line: initrd=initrd.img rescue acpi=off selinu=0 BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
><4> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
><4> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
><4> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
><4> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
><4>end_pfn_map = 1048576
><6>DMI 2.3 present.
><6>Scanning NUMA topology in Northbridge 24
><6>Number of nodes 1
><6>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
><7>NUMA: Using 63 for the hash shift.
><6>Using node hash shift of 63
><6>Bootmem setup node 0 0000000000000000-000000007ffb0000
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   524208
><7>On node 0 totalpages: 524111
><7>  DMA zone: 88 pages used for memmap
><7>  DMA zone: 2363 pages reserved
><7>  DMA zone: 1548 pages, LIFO batch:0
><7>  DMA32 zone: 11174 pages used for memmap
><7>  DMA32 zone: 508938 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><6>ATI board detected. Disabling timer routing over 8254.
><4>Intel MultiProcessor Specification v1.4
><6>MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID:  MPTABLE: APIC at: 0xFEE00000
><6>Processor #0 (Bootup-CPU)
><6>Processor #1
><4>I/O APIC #2 at 0xFEC00000.
><6>Setting APIC routing to physical flat
><6>Processors: 2
><4>Nosave address range: 000000000009f000 - 00000000000a0000
><4>Nosave address range: 00000000000a0000 - 00000000000e4000
><4>Nosave address range: 00000000000e4000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:7f700000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 44672 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 510486
><5>Kernel command line: initrd=initrd.img rescue acpi=off selinu=0 BOOT_IMAGE=vmlinuz 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>time.c: Detected 2405.523 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
><4>... MAX_LOCKDEP_SUBCLASSES:    8
><4>... MAX_LOCK_DEPTH:          30
><4>... MAX_LOCKDEP_KEYS:        2048
><4>... CLASSHASH_SIZE:           1024
><4>... MAX_LOCKDEP_ENTRIES:     8192
><4>... MAX_LOCKDEP_CHAINS:      16384
><4>... CHAINHASH_SIZE:          8192
><4> memory used by lock dependency info: 1648 kB
><4> per task-struct memory footprint: 1680 bytes
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Checking aperture...
><4>CPU 0: aperture @ 380e000000 size 32 MB
><4>Aperture too small (32 MB)
><4>No AGP bridge found
><4>Memory: 2032976k/2096832k available (2461k kernel code, 63468k reserved, 1444k data, 328k init)
><4>Calibrating delay using timer specific routine.. 4813.58 BogoMIPS (lpj=2406794)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><4>lockdep: not fixing up alternatives.
><4>ExtINT not setup in hardware but reported by MP table
><6>Using local APIC timer interrupts.
><4>result 12528776
><6>Detected 12.528 MHz APIC timer.
><4>lockdep: not fixing up alternatives.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4810.25 BogoMIPS (lpj=2405126)
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><4>AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=88 bytes
><7>sizeof(inode)=1008 bytes
><7>sizeof(dentry)=248 bytes
><7>sizeof(ext3inode)=1376 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=3776 bytes
><4>migration_cost=222
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5533k freed
><7>PM: Adding info for No Bus:platform
><6>NET: Registered protocol family 16
><7>PM: Adding info for No Bus:vtcon0
><6>PCI: Using configuration type 1
><6>ACPI: Interpreter disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI: disabled
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><4>PCI: Probing PCI hardware
><7>PCI: Probing PCI hardware (bus 00)
><7>PM: Adding info for No Bus:pci0000:00
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:14.4
><7>PM: Adding info for pci:0000:00:00.0
><7>PM: Adding info for pci:0000:00:02.0
><7>PM: Adding info for pci:0000:00:05.0
><7>PM: Adding info for pci:0000:00:12.0
><7>PM: Adding info for pci:0000:00:13.0
><7>PM: Adding info for pci:0000:00:13.1
><7>PM: Adding info for pci:0000:00:13.2
><7>PM: Adding info for pci:0000:00:13.3
><7>PM: Adding info for pci:0000:00:13.4
><7>PM: Adding info for pci:0000:00:13.5
><7>PM: Adding info for pci:0000:00:14.0
><7>PM: Adding info for pci:0000:00:14.1
><7>PM: Adding info for pci:0000:00:14.2
><7>PM: Adding info for pci:0000:00:14.3
><7>PM: Adding info for pci:0000:00:14.4
><7>PM: Adding info for pci:0000:00:18.0
><7>PM: Adding info for pci:0000:00:18.1
><7>PM: Adding info for pci:0000:00:18.2
><7>PM: Adding info for pci:0000:00:18.3
><7>PM: Adding info for pci:0000:01:00.0
><7>PM: Adding info for pci:0000:01:00.1
><7>PM: Adding info for pci:0000:02:00.0
><7>PM: Adding info for pci:0000:03:04.0
><6>PCI: Using IRQ router default [1002/438d] at 0000:00:14.3
><6>PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 21
><6>PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 18
><6>PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 18
><6>PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 19
><6>PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 16
><6>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18
><6>PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17
><6>PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 23
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><7>PM: Adding info for No Bus:mem
><7>PM: Adding info for No Bus:null
><7>PM: Adding info for No Bus:port
><7>PM: Adding info for No Bus:zero
><7>PM: Adding info for No Bus:full
><7>PM: Adding info for No Bus:random
><7>PM: Adding info for No Bus:urandom
><7>PM: Adding info for No Bus:kmsg
><6>PCI: Bridge: 0000:00:02.0
><6>  IO window: c000-cfff
><6>  MEM window: fbd00000-fbdfffff
><6>  PREFETCH window: d0000000-dfffffff
><6>PCI: Bridge: 0000:00:05.0
><6>  IO window: d000-dfff
><6>  MEM window: fbe00000-fbefffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:14.4
><6>  IO window: e000-efff
><6>  MEM window: fbf00000-fbffffff
><6>  PREFETCH window: 88000000-880fffff
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
><6>TCP: Hash tables configured (established 65536 bind 65536)
><6>TCP reno registered
><7>PM: Adding info for No Bus:mcelog
><7>PM: Adding info for No Bus:msr0
><7>PM: Adding info for No Bus:msr1
><7>PM: Adding info for No Bus:cpu0
><7>PM: Adding info for No Bus:cpu1
><7>PM: Adding info for platform:pcspkr
><7>PM: Adding info for No Bus:snapshot
><6>audit: initializing netlink socket (disabled)
><5>audit(1173049121.217:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key EA28B8C493167C83
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:02.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:02.0:pcie00]
><7>PM: Adding info for pci_express:0000:00:02.0:pcie00
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:05.0:pcie00]
><7>PM: Adding info for pci_express:0000:00:05.0:pcie00
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><7>PM: Adding info for platform:vesafb.0
><7>PM: Adding info for No Bus:tty
><7>PM: Adding info for No Bus:console
><7>PM: Adding info for No Bus:ptmx
><7>PM: Adding info for No Bus:tty0
><7>PM: Adding info for No Bus:vcs
><7>PM: Adding info for No Bus:vcsa
><7>PM: Adding info for No Bus:tty1
><7>PM: Adding info for No Bus:tty2
><7>PM: Adding info for No Bus:tty3
><7>PM: Adding info for No Bus:tty4
><7>PM: Adding info for No Bus:tty5
><7>PM: Adding info for No Bus:tty6
><7>PM: Adding info for No Bus:tty7
><7>PM: Adding info for No Bus:tty8
><7>PM: Adding info for No Bus:tty9
><7>PM: Adding info for No Bus:tty10
><7>PM: Adding info for No Bus:tty11
><7>PM: Adding info for No Bus:tty12
><7>PM: Adding info for No Bus:tty13
><7>PM: Adding info for No Bus:tty14
><7>PM: Adding info for No Bus:tty15
><7>PM: Adding info for No Bus:tty16
><7>PM: Adding info for No Bus:tty17
><7>PM: Adding info for No Bus:tty18
><7>PM: Adding info for No Bus:tty19
><7>PM: Adding info for No Bus:tty20
><7>PM: Adding info for No Bus:tty21
><7>PM: Adding info for No Bus:tty22
><7>PM: Adding info for No Bus:tty23
><7>PM: Adding info for No Bus:tty24
><7>PM: Adding info for No Bus:tty25
><7>PM: Adding info for No Bus:tty26
><7>PM: Adding info for No Bus:tty27
><7>PM: Adding info for No Bus:tty28
><7>PM: Adding info for No Bus:tty29
><7>PM: Adding info for No Bus:tty30
><7>PM: Adding info for No Bus:tty31
><7>PM: Adding info for No Bus:tty32
><7>PM: Adding info for No Bus:tty33
><7>PM: Adding info for No Bus:tty34
><7>PM: Adding info for No Bus:tty35
><7>PM: Adding info for No Bus:tty36
><7>PM: Adding info for No Bus:tty37
><7>PM: Adding info for No Bus:tty38
><7>PM: Adding info for No Bus:tty39
><7>PM: Adding info for No Bus:tty40
><7>PM: Adding info for No Bus:tty41
><7>PM: Adding info for No Bus:tty42
><7>PM: Adding info for No Bus:tty43
><7>PM: Adding info for No Bus:tty44
><7>PM: Adding info for No Bus:tty45
><7>PM: Adding info for No Bus:tty46
><7>PM: Adding info for No Bus:tty47
><7>PM: Adding info for No Bus:tty48
><7>PM: Adding info for No Bus:tty49
><7>PM: Adding info for No Bus:tty50
><7>PM: Adding info for No Bus:tty51
><7>PM: Adding info for No Bus:tty52
><7>PM: Adding info for No Bus:tty53
><7>PM: Adding info for No Bus:tty54
><7>PM: Adding info for No Bus:tty55
><7>PM: Adding info for No Bus:tty56
><7>PM: Adding info for No Bus:tty57
><7>PM: Adding info for No Bus:tty58
><7>PM: Adding info for No Bus:tty59
><7>PM: Adding info for No Bus:tty60
><7>PM: Adding info for No Bus:tty61
><7>PM: Adding info for No Bus:tty62
><7>PM: Adding info for No Bus:tty63
><7>PM: Adding info for No Bus:rtc
><6>Real Time Clock Driver v1.12ac
><7>PM: Adding info for No Bus:hpet
><7>PM: Removing info for No Bus:hpet
><7>PM: Adding info for No Bus:nvram
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><7>PM: Adding info for platform:serial8250
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><7>PM: Adding info for No Bus:ttyS0
><7>PM: Adding info for No Bus:ttyS1
><7>PM: Adding info for No Bus:ttyS2
><7>PM: Adding info for No Bus:ttyS3
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><7>PM: Adding info for No Bus:lo
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: No PS/2 controller found. Probing ports directly.
><7>PM: Adding info for platform:i8042
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><7>PM: Adding info for serio:serio0
><7>PM: Adding info for serio:serio1
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><6>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00)
><3>powernow-k8: MP systems not supported by PSB BIOS structure
><3>powernow-k8: MP systems not supported by PSB BIOS structure
><6>Freeing unused kernel memory: 328k freed
><4>Write protecting the kernel read-only data: 1056k
><7>PM: Adding info for No Bus:vcs1
><7>PM: Adding info for No Bus:vcsa1
><7>PM: Adding info for No Bus:vcs4
><7>PM: Adding info for No Bus:vcsa4
><7>PM: Adding info for No Bus:vcs9
><7>PM: Adding info for No Bus:vcsa9
><7>PM: Removing info for No Bus:vcs9
><7>PM: Removing info for No Bus:vcsa9
><7>PM: Adding info for No Bus:vcs8
><7>PM: Adding info for No Bus:vcsa8
><7>PM: Removing info for No Bus:vcs8
><7>PM: Removing info for No Bus:vcsa8
><7>PM: Adding info for No Bus:vcs7
><7>PM: Adding info for No Bus:vcsa7
><7>PM: Removing info for No Bus:vcs7
><7>PM: Removing info for No Bus:vcsa7
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><7>PM: Removing info for No Bus:vcs3
><7>PM: Removing info for No Bus:vcsa3
><7>PM: Adding info for No Bus:vcs2
><7>PM: Adding info for No Bus:vcsa2
><7>PM: Removing info for No Bus:vcs2
><7>PM: Removing info for No Bus:vcsa2
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><6>loop: loaded (max 8 devices)
><6>FDC 0 is a post-1991 82077
><6>BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
><6>input: PC Speaker as /class/input/input2
><6>squashfs: version 3.2-alpha (2006/12/12) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ehci_hcd 0000:00:13.5: EHCI Host Controller
><6>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:13.5: debug port 1
><6>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbcfac00
><6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><7>PM: Adding info for usb:usb1
><7>PM: Adding info for No Bus:usbdev1.1_ep00
><6>usb usb1: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:1-0:1.0
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><7>PM: Adding info for No Bus:usbdev1.1_ep81
><7>PM: Adding info for No Bus:usbdev1.1
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>ohci_hcd 0000:00:13.0: OHCI Host Controller
><6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbcff000
><7>PM: Adding info for usb:usb2
><7>PM: Adding info for No Bus:usbdev2.1_ep00
><6>usb usb2: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:2-0:1.0
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev2.1_ep81
><7>PM: Adding info for No Bus:usbdev2.1
><6>ohci_hcd 0000:00:13.1: OHCI Host Controller
><6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
><6>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbcfe000
><7>PM: Adding info for usb:usb3
><7>PM: Adding info for No Bus:usbdev3.1_ep00
><6>usb usb3: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:3-0:1.0
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb 1-9: new high speed USB device using ehci_hcd and address 3
><7>PM: Adding info for No Bus:usbdev3.1_ep81
><7>PM: Adding info for No Bus:usbdev3.1
><6>ohci_hcd 0000:00:13.2: OHCI Host Controller
><6>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
><6>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbcfd000
><7>PM: Adding info for usb:1-9
><7>PM: Adding info for No Bus:usbdev1.3_ep00
><6>usb 1-9: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:1-9:1.0
><7>PM: Adding info for usb:usb4
><7>PM: Adding info for No Bus:usbdev1.3_ep01
><7>PM: Adding info for No Bus:usbdev4.1_ep00
><7>PM: Adding info for No Bus:usbdev1.3_ep82
><7>PM: Adding info for No Bus:usbdev1.3
><6>usb usb4: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:4-0:1.0
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev4.1_ep81
><7>PM: Adding info for No Bus:usbdev4.1
><6>ohci_hcd 0000:00:13.3: OHCI Host Controller
><6>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
><6>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbcfc000
><7>PM: Adding info for usb:usb5
><7>PM: Adding info for No Bus:usbdev5.1_ep00
><6>usb usb5: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:5-0:1.0
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb 3-1: new low speed USB device using ohci_hcd and address 2
><7>PM: Adding info for No Bus:usbdev5.1_ep81
><7>PM: Adding info for No Bus:usbdev5.1
><6>ohci_hcd 0000:00:13.4: OHCI Host Controller
><6>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
><6>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbcfb000
><7>PM: Adding info for usb:usb6
><7>PM: Adding info for No Bus:usbdev6.1_ep00
><6>usb usb6: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:6-0:1.0
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><7>PM: Adding info for usb:3-1
><7>PM: Adding info for No Bus:usbdev3.2_ep00
><6>usb 3-1: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:3-1:1.0
><6>input: Logitech USB-PS/2 Optical Mouse as /class/input/input3
><6>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1
><7>PM: Adding info for No Bus:usbdev3.2_ep81
><7>PM: Adding info for No Bus:usbdev3.2
><7>PM: Adding info for No Bus:usbdev6.1_ep81
><7>PM: Adding info for No Bus:usbdev6.1
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>PM: Adding info for No Bus:host0
><7>usb-storage: device found at 3
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device scan complete
><7>PM: Adding info for No Bus:target0:0:0
><5>scsi 0:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
><5>scsi 0:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
><5>scsi 0:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
><5>scsi 0:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
><7>PM: Adding info for No Bus:target0:0:1
><7>PM: Removing info for No Bus:target0:0:1
><7>PM: Adding info for No Bus:target0:0:2
><7>PM: Removing info for No Bus:target0:0:2
><7>PM: Adding info for No Bus:target0:0:3
><7>PM: Removing info for No Bus:target0:0:3
><7>PM: Adding info for No Bus:target0:0:4
><7>PM: Removing info for No Bus:target0:0:4
><7>PM: Adding info for No Bus:target0:0:5
><7>PM: Removing info for No Bus:target0:0:5
><7>PM: Adding info for No Bus:target0:0:6
><7>PM: Removing info for No Bus:target0:0:6
><7>PM: Adding info for No Bus:target0:0:7
><7>PM: Removing info for No Bus:target0:0:7
><7>PM: Adding info for scsi:0:0:0:0
><5>sd 0:0:0:0: Attached scsi removable disk sda
><7>PM: Adding info for scsi:0:0:0:1
><5>sd 0:0:0:1: Attached scsi removable disk sdb
><7>PM: Adding info for scsi:0:0:0:2
><5>sd 0:0:0:2: Attached scsi removable disk sdc
><7>PM: Adding info for scsi:0:0:0:3
><5>sd 0:0:0:3: Attached scsi removable disk sdd
><6>usbcore: deregistering interface driver usb-storage
><7>PM: Removing info for scsi:0:0:0:0
><7>PM: Removing info for scsi:0:0:0:1
><7>PM: Removing info for scsi:0:0:0:2
><7>PM: Removing info for scsi:0:0:0:3
><7>PM: Removing info for No Bus:target0:0:0
><7>PM: Removing info for No Bus:host0
><7>PM: Removing info for No Bus:usbdev1.3_ep01
><7>PM: Removing info for No Bus:usbdev1.3_ep82
><7>PM: Adding info for No Bus:usbdev1.3_ep01
><7>PM: Adding info for No Bus:usbdev1.3_ep82
><6>skge 1.10 addr 0xfbffc000 irq 23 chip Yukon-Lite rev 9
><7>PM: Adding info for No Bus:eth0
><6>skge eth0: addr 00:18:f3:46:e2:34
><7>libata version 2.20 loaded.
><6>ata1: PATA max UDMA/100 cmd 0x000000000001b000 ctl 0x000000000001a002 bmdma 0x0000000000017000 irq 16
><6>ata2: PATA max UDMA/100 cmd 0x0000000000019000 ctl 0x0000000000018002 bmdma 0x0000000000017008 irq 16
><6>scsi1 : pata_atiixp
><7>PM: Adding info for No Bus:host1
><6>ata1.00: ATAPI, max UDMA/66
><6>ata1.00: configured for UDMA/33
><6>scsi2 : pata_atiixp
><7>PM: Adding info for No Bus:host2
><7>PM: Adding info for No Bus:target1:0:0
><5>scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL05 PQ: 0 ANSI: 5
><7>PM: Adding info for scsi:1:0:0:0
><4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:12.0: version 2.1
><7>PCI: Setting latency timer of device 0000:00:12.0 to 64
><6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
><6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xffffc20000024100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata4: SATA max UDMA/133 cmd 0xffffc20000024180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata5: SATA max UDMA/133 cmd 0xffffc20000024200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata6: SATA max UDMA/133 cmd 0xffffc20000024280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>scsi3 : ahci
><7>PM: Adding info for No Bus:host3
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><4>ata3.00: limiting speed to UDMA7:PIO5
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>scsi4 : ahci
><7>PM: Adding info for No Bus:host4
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata4.00: qc timeout (cmd 0xec)
><4>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata4.00: qc timeout (cmd 0xec)
><4>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><4>ata4.00: limiting speed to UDMA7:PIO5
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><4>ata4.00: qc timeout (cmd 0xec)
><4>ata4.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
><6>scsi5 : ahci
><7>PM: Adding info for No Bus:host5
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>scsi6 : ahci
><7>PM: Adding info for No Bus:host6
><6>ata6: SATA link down (SStatus 0 SControl 300)
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
><6>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
><6>ata7: SATA max UDMA/133 cmd 0xffffc20000030100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 17
><6>scsi7 : ahci
><7>PM: Adding info for No Bus:host7
><6>ata7: SATA link down (SStatus 0 SControl 300)
><6>Initializing USB Mass Storage driver...
><6>scsi8 : SCSI emulation for USB Mass Storage devices
><7>PM: Adding info for No Bus:host8
><7>usb-storage: device found at 3
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device scan complete
><7>PM: Adding info for No Bus:target8:0:0
><5>scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
><5>scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
><5>scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
><5>scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
><7>PM: Adding info for No Bus:target8:0:1
><7>PM: Removing info for No Bus:target8:0:1
><7>PM: Adding info for No Bus:target8:0:2
><7>PM: Removing info for No Bus:target8:0:2
><7>PM: Adding info for No Bus:target8:0:3
><7>PM: Removing info for No Bus:target8:0:3
><7>PM: Adding info for No Bus:target8:0:4
><7>PM: Removing info for No Bus:target8:0:4
><7>PM: Adding info for No Bus:target8:0:5
><7>PM: Removing info for No Bus:target8:0:5
><7>PM: Adding info for No Bus:target8:0:6
><7>PM: Removing info for No Bus:target8:0:6
><7>PM: Adding info for No Bus:target8:0:7
><7>PM: Removing info for No Bus:target8:0:7
><7>PM: Adding info for scsi:8:0:0:0
><5>sd 8:0:0:0: Attached scsi removable disk sda
><7>PM: Adding info for scsi:8:0:0:1
><5>sd 8:0:0:1: Attached scsi removable disk sdb
><7>PM: Adding info for scsi:8:0:0:2
><5>sd 8:0:0:2: Attached scsi removable disk sdc
><7>PM: Adding info for scsi:8:0:0:3
><5>sd 8:0:0:3: Attached scsi removable disk sdd
><6>skge eth0: enabling interface
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>eth0: no IPv6 routers present
><4>Unable to identify CD-ROM format.
><6>attempt to access beyond end of device
><6>loop7: rw=0, want=66, limit=4
><4>isofs_fill_super: bread failed, dev=loop7, iso_blknum=16, block=32
><3>SQUASHFS error: Can't find a SQUASHFS superblock on loop7
><3>cramfs: wrong magic
><3>FAT: invalid media value (0xc1)
><6>VFS: Can't find a valid FAT filesystem on dev loop7.
><7>security:  3 users, 6 roles, 1673 types, 210 bools, 1 sens, 1024 cats
><7>security:  60 classes, 59279 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev 0:15, type nfs), uses genfs_contexts
><7>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1173049369.640:2): policy loaded auid=4294967295
><7>PM: Adding info for No Bus:vcs2
><7>PM: Adding info for No Bus:vcsa2
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  7412.000 MB/sec
><4>raid5: using function: generic_sse (7412.000 MB/sec)
><4>raid6: int64x1   2148 MB/s
><4>raid6: int64x2   2609 MB/s
><4>raid6: int64x4   1949 MB/s
><4>raid6: int64x8   2117 MB/s
><4>raid6: sse2x1    3402 MB/s
><4>raid6: sse2x2    4449 MB/s
><4>raid6: sse2x4    4542 MB/s
><4>raid6: using algorithm sse2x4 (4542 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Mar  2 2007 19:01:43) installed
><6>Lock_Nolock (built Mar  2 2007 19:01:51) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><7>PM: Adding info for No Bus:device-mapper
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><7>PM: Removing info for No Bus:vcs3
><7>PM: Removing info for No Bus:vcsa3
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><5>audit(1173049373.012:3): audit_pid=739 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6

Actions: View

Attachments on bug 229621: 148843 | 148844 | 148845 | 149228 | 149229