Attachment 149659 Details for Bug 230656 – scsconfig.log

scsconfig.log

scsconfig.log (text/plain), 51.76 KB, created by Kurt Heine on 2007-03-08 23:51:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kurt Heine

Created: 2007-03-08 23:51:21 UTC

Size: 51.76 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Fri Mar  9 10:49:51 EST 2007
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
>00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 04)
>00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
>00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
>00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
>00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
>00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
>00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
>00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
>00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4)
>00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04)
>00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 04)
>00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
>02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 11)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:2580 (rev 04)
>	Subsystem: 8086:2580
>	Flags: bus master, fast devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:02.0 0300: 8086:2582 (rev 04)
>	Subsystem: 8086:2582
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at dff00000 (32-bit, non-prefetchable) [size=512K]
>	I/O ports at ff00 [size=8]
>	Memory at c0000000 (32-bit, prefetchable) [size=256M]
>	Memory at dff80000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [d0] Power Management version 2
>
>00:1b.0 0403: 8086:2668 (rev 04)
>	Subsystem: 1025:0077
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at dfff8000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [70] Express Unknown type IRQ 0
>	Capabilities: [100] Virtual Channel
>	Capabilities: [130] Unknown (5)
>
>00:1c.0 0604: 8086:2660 (rev 04)
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000c000-0000cfff
>	Memory behind bridge: dfb00000-dfbfffff
>	Prefetchable memory behind bridge: 00000000dfe00000-00000000dfe00000
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>	Capabilities: [100] Virtual Channel
>	Capabilities: [180] Unknown (5)
>
>00:1c.1 0604: 8086:2662 (rev 04)
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: dfd00000-dfdfffff
>	Prefetchable memory behind bridge: 00000000dfc00000-00000000dfc00000
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>	Capabilities: [100] Virtual Channel
>	Capabilities: [180] Unknown (5)
>
>00:1d.0 0c03: 8086:2658 (rev 04)
>	Subsystem: 1025:0077
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	I/O ports at fe00 [size=32]
>
>00:1d.1 0c03: 8086:2659 (rev 04)
>	Subsystem: 1025:0077
>	Flags: bus master, medium devsel, latency 0, IRQ 19
>	I/O ports at fd00 [size=32]
>
>00:1d.2 0c03: 8086:265a (rev 04)
>	Subsystem: 1025:0077
>	Flags: bus master, medium devsel, latency 0, IRQ 20
>	I/O ports at fc00 [size=32]
>
>00:1d.3 0c03: 8086:265b (rev 04)
>	Subsystem: 1025:0077
>	Flags: bus master, medium devsel, latency 0, IRQ 16
>	I/O ports at fb00 [size=32]
>
>00:1d.7 0c03: 8086:265c (rev 04) (prog-if 20)
>	Subsystem: 1025:0077
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	Memory at dffff000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>
>00:1e.0 0604: 8086:244e (rev d4) (prog-if 01)
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: dfa00000-dfafffff
>	Prefetchable memory behind bridge: 00000000df900000-00000000df900000
>	Capabilities: [50] #0d [0000]
>
>00:1f.0 0601: 8086:2640 (rev 04)
>	Subsystem: 8086:2640
>	Flags: bus master, medium devsel, latency 0
>
>00:1f.2 0101: 8086:2651 (rev 04) (prog-if 80)
>	Subsystem: 8086:2651
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at fa00 [size=16]
>	Capabilities: [70] Power Management version 2
>
>00:1f.3 0c05: 8086:266a (rev 04)
>	Subsystem: 1025:0077
>	Flags: medium devsel, IRQ 19
>	I/O ports at 0500 [size=32]
>
>02:00.0 0200: 14e4:1677 (rev 11)
>	Subsystem: 1025:0077
>	Flags: bus master, fast devsel, latency 0, IRQ 17
>	Memory at dfd00000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [48] Power Management version 2
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
>	Capabilities: [d0] Express Endpoint IRQ 0
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [13c] Virtual Channel
>
>------- lsmod --------
>Module                  Size  Used by
>i915                   26305  3 
>drm                    79237  4 i915
>nf_conntrack_ftp       14017  0 
>nf_conntrack           62409  1 nf_conntrack_ftp
>nfnetlink              10969  1 nf_conntrack
>autofs4                25693  2 
>hidp                   26697  2 
>rfcomm                 44777  0 
>l2cap                  30929  10 hidp,rfcomm
>bluetooth              58949  5 hidp,rfcomm,l2cap
>sunrpc                164381  1 
>ip6t_REJECT             9409  0 
>xt_tcpudp               7233  0 
>x_tables               19029  2 ip6t_REJECT,xt_tcpudp
>ipv6                  280097  23 ip6t_REJECT
>cpufreq_ondemand       12109  2 
>acpi_cpufreq           14153  0 
>dm_mirror              25837  0 
>dm_mod                 59701  1 dm_mirror
>video                  21193  0 
>sbs                    19341  0 
>i2c_ec                  9281  1 sbs
>button                 12241  0 
>dock                   14253  0 
>battery                14149  0 
>ac                      9413  0 
>lp                     16809  0 
>snd_hda_intel          24809  2 
>snd_hda_codec         203393  1 snd_hda_intel
>snd_seq_dummy           7877  0 
>snd_seq_oss            34257  0 
>snd_seq_midi_event     11337  1 snd_seq_oss
>snd_seq                52377  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>parport_pc             30437  1 
>rtc_cmos               11989  0 
>snd_seq_device         12245  3 snd_seq_dummy,snd_seq_oss,snd_seq
>parport                39081  2 lp,parport_pc
>rtc_core               15069  1 rtc_cmos
>tg3                   105557  0 
>serio_raw              11077  0 
>rtc_lib                 7617  1 rtc_core
>pcspkr                  7361  0 
>snd_pcm_oss            44001  1 
>snd_mixer_oss          19785  1 snd_pcm_oss
>i2c_i801               12109  0 
>i2c_core               25425  2 i2c_ec,i2c_i801
>iTCO_wdt               15121  0 
>iTCO_vendor_support     7877  1 iTCO_wdt
>snd_pcm                76653  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
>snd_timer              25565  2 snd_seq,snd_pcm
>snd                    55301  11 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore              11809  2 snd
>floppy                 60581  0 
>snd_page_alloc         13897  2 snd_hda_intel,snd_pcm
>sr_mod                 20581  0 
>cdrom                  36961  1 sr_mod
>sg                     37477  0 
>ata_generic            12356  0 
>ata_piix               18885  3 
>libata                114149  2 ata_generic,ata_piix
>sd_mod                 24513  4 
>scsi_mod              140717  4 sr_mod,sg,libata,sd_mod
>ext3                  126713  2 
>jbd                    61217  1 ext3
>mbcache                12741  1 ext3
>ehci_hcd               36057  0 
>ohci_hcd               25185  0 
>uhci_hcd               27737  0 
>
>------- /etc/modprobe.conf --------
>alias scsi_hostadapter ata_piix
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0  
>options snd-hda-intel index=0  
>remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-hda-intel
>alias usb-controller ehci-hcd
>alias usb-controller1 uhci-hcd
>alias eth0 tg3
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard, do not edit by hand
>#HWCONF
>#DEV 1
>pcm.!default { type hw card 0 device 1 } 
>ctl.!default { type hw card 0 }
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: Intel [HDA Intel], device 0: ALC880 Analog [ALC880 Analog]
>  Subdevices: 0/1
>  Subdevice #0: subdevice #0
>card 0: Intel [HDA Intel], device 1: ALC880 Digital [ALC880 Digital]
>  Subdevices: 1/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'PCM',0
>  Capabilities: pvolume
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 255
>  Mono:
>  Front Left: Playback 191 [75%] [-12.80dB]
>  Front Right: Playback 191 [75%] [-12.80dB]
>Simple mixer control 'Front',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 64
>  Mono:
>  Front Left: Playback 48 [75%] [-16.00dB] [on]
>  Front Right: Playback 48 [75%] [-16.00dB] [on]
>Simple mixer control 'Front Mic',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65
>  Mono:
>  Front Left: Playback 65 [100%] [30.00dB] [off]
>  Front Right: Playback 65 [100%] [30.00dB] [off]
>Simple mixer control 'Surround',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 64
>  Mono:
>  Front Left: Playback 64 [100%] [0.00dB] [on]
>  Front Right: Playback 64 [100%] [0.00dB] [on]
>Simple mixer control 'Center',0
>  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
>  Playback channels: Mono
>  Limits: Playback 0 - 64
>  Mono: Playback 64 [100%] [0.00dB] [on]
>Simple mixer control 'LFE',0
>  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
>  Playback channels: Mono
>  Limits: Playback 0 - 64
>  Mono: Playback 64 [100%] [0.00dB] [on]
>Simple mixer control 'Side',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 64
>  Mono:
>  Front Left: Playback 64 [100%] [0.00dB] [on]
>  Front Right: Playback 64 [100%] [0.00dB] [on]
>Simple mixer control 'Line',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65
>  Mono:
>  Front Left: Playback 35 [54%] [0.00dB] [on]
>  Front Right: Playback 35 [54%] [0.00dB] [on]
>Simple mixer control 'CD',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65
>  Mono:
>  Front Left: Playback 48 [74%] [13.00dB] [on]
>  Front Right: Playback 48 [74%] [13.00dB] [on]
>Simple mixer control 'Mic',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65
>  Mono:
>  Front Left: Playback 0 [0%] [-35.00dB] [off]
>  Front Right: Playback 0 [0%] [-35.00dB] [off]
>Simple mixer control 'IEC958',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [on]
>Simple mixer control 'PC Speaker',0
>  Capabilities: pvolume pswitch
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 65
>  Mono:
>  Front Left: Playback 41 [63%] [6.00dB] [on]
>  Front Right: Playback 41 [63%] [6.00dB] [on]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 35
>  Front Left: Capture 15 [43%] [15.00dB] [on]
>  Front Right: Capture 15 [43%] [15.00dB] [on]
>Simple mixer control 'Capture',1
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 35
>  Front Left: Capture 35 [100%] [35.00dB] [on]
>  Front Right: Capture 35 [100%] [35.00dB] [on]
>Simple mixer control 'Capture',2
>  Capabilities: cvolume cswitch
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 35
>  Front Left: Capture 35 [100%] [35.00dB] [on]
>  Front Right: Capture 35 [100%] [35.00dB] [on]
>Simple mixer control 'Channel Mode',0
>  Capabilities: enum
>  Items: '8ch'
>  Item0: '8ch'
>Simple mixer control 'Input Source',0
>  Capabilities: enum
>  Items: 'Mic' 'Front Mic' 'Line' 'CD'
>  Item0: 'Front Mic'
>Simple mixer control 'Input Source',1
>  Capabilities: enum
>  Items: 'Mic' 'Front Mic' 'Line' 'CD'
>  Item0: 'Front Mic'
>Simple mixer control 'Input Source',2
>  Capabilities: enum
>  Items: 'Mic' 'Front Mic' 'Line' 'CD'
>  Item0: 'Front Mic'
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Tue Mar 06 13:10:00 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-0.2.rc2.fc7
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-0.3.rc2.fc7
>
>------- /proc/asound/modules --------
> 0 snd_hda_intel
>
>------- /proc/asound/pcm --------
>00-02: ALC880 Analog : ALC880 Analog : capture 2
>00-01: ALC880 Digital : ALC880 Digital : playback 1
>00-00: ALC880 Analog : ALC880 Analog : playback 1 : capture 2
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: i2c-i801
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller"
>vendorId: 8086
>deviceId: 266a
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: intel-rng
>desc: "Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge"
>vendorId: 8086
>deviceId: 2640
>subVendorId: 8086
>subDeviceId: 2640
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801 PCI Bridge"
>vendorId: 8086
>deviceId: 244e
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2"
>vendorId: 8086
>deviceId: 2662
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  1
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1"
>vendorId: 8086
>deviceId: 2660
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  0
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "INT0800"
>deviceId: INT0800
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub"
>vendorId: 8086
>deviceId: 2580
>subVendorId: 8086
>subDeviceId: 2580
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2975.fc7 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2975.fc7 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2975.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2975.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2975.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2975.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2975.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2975.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2975.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2975.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>compat: PNP030b
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0400"
>deviceId: PNP0400
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0700"
>deviceId: PNP0700
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a08"
>deviceId: PNP0a08
>compat: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: rtc-cmos
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0f13"
>deviceId: PNP0f13
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (CM)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: tg3
>desc: "Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express"
>network.hwaddr: 00:01:6c:e4:b1:01
>vendorId: 14e4
>deviceId: 1677
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  0
>pcifn:  0
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "ImPS/2 Logitech Wheel Mouse"
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller"
>vendorId: 8086
>deviceId: 2668
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1b
>pcifn:  0
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "ATAPI DVD RW 16XMax"
>host: 1
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: intelfb
>desc: "Intel Corporation 82915G/GV/910GL Integrated Graphics Controller"
>video.xdriver: i810
>vendorId: 8086
>deviceId: 2582
>subVendorId: 8086
>subDeviceId: 2582
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  0
>-
>class: FLOPPY
>bus: MISC
>detached: 0
>device: fd0
>desc: "3.5" 1.44MB floppy drive"
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA WDC WD800JD-22LS"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller"
>vendorId: 8086
>deviceId: 265c
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  7
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4"
>vendorId: 8086
>deviceId: 265b
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3"
>vendorId: 8086
>deviceId: 265a
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2"
>vendorId: 8086
>deviceId: 2659
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1"
>vendorId: 8086
>deviceId: 2658
>subVendorId: 1025
>subDeviceId: 0077
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_generic
>desc: "Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller"
>vendorId: 8086
>deviceId: 2651
>subVendorId: 8086
>subDeviceId: 2651
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  2
>
>------- dmesg --------
>Linux version 2.6.20-1.2975.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070222 (Red Hat 4.1.2-3)) #1 SMP Wed Mar 7 16:42:33 EST 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003f6f0000 end: 000000003f7f0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003f7f0000 size: 0000000000003000 end: 000000003f7f3000 type: 4
>copy_e820_map() start: 000000003f7f3000 size: 000000000000d000 end: 000000003f800000 type: 3
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7f0000 (usable)
> BIOS-e820: 000000003f7f0000 - 000000003f7f3000 (ACPI NVS)
> BIOS-e820: 000000003f7f3000 - 000000003f800000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4fe0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260080) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260080
>early_node_map[1] active PFN ranges
>    0:        0 ->   260080
>On node 0 totalpages: 260080
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 389 pages used for memmap
>  HighMem zone: 30315 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F9080, 0014 (r0 IntelR)
>ACPI: RSDT 3F7F3040, 0034 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 3F7F30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 3F7F3180, 3ED9 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 3F7F0000, 0040
>ACPI: MCFG 3F7F7180, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 3F7F70C0, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: SSDT 3F7F76D0, 017B (r1 INTELR    CpuPm     1000 MSFT  100000E)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:a0800000)
>Built 1 zonelists.  Total pages: 256779
>Kernel command line: ro root=LABEL=/
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0791000 soft=c0771000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2992.757 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1016204k/1040320k available (2123k kernel code, 23392k reserved, 1115k data, 244k init, 122816k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc072f000 - 0xc076c000   ( 244 kB)
>      .data : 0xc0612cbf - 0xc0729cb4   (1115 kB)
>      .text : 0xc0400000 - 0xc0612cbf   (2123 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5989.32 BogoMIPS (lpj=2994660)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000649d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0792000 soft=c0772000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5984.19 BogoMIPS (lpj=2992097)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000649d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
>Total of 2 processors activated (11973.51 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>migration_cost=52
>PM: Adding info for No Bus:platform
>Time:  8:53:34  Date: 02/09/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0A08:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0700:00
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:PNP0501:01
>PM: Adding info for acpi:PNP0400:00
>PM: Adding info for acpi:PNP0F13:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:INT0800:00
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:device:18
>PM: Adding info for acpi:device:19
>PM: Adding info for acpi:device:1a
>PM: Adding info for acpi:device:1b
>PM: Adding info for acpi:device:1c
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:PNP0C02:02
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>Boot video device is 0000:00:02.0
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>0000:00:1f.2: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.2: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.2: trying to change BAR2 from 0000 to 0170
>0000:00:1f.2: trying to change BAR3 from 0000 to 0374
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:02.0
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1c.1
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:02:00.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>PM: Adding info for pnp:00:0d
>PM: Adding info for pnp:00:0e
>PM: Adding info for pnp:00:0f
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:02:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
>pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0f: iomem range 0xcc000-0xcffff has been reserved
>pnp: 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0f: iomem range 0xfc000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: c000-cfff
>  MEM window: dfb00000-dfbfffff
>  PREFETCH window: dfe00000-dfefffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: e000-efff
>  MEM window: dfd00000-dfdfffff
>  PREFETCH window: dfc00000-dfcfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: dfa00000-dfafffff
>  PREFETCH window: df900000-df9fffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2784k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1173430413.639:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 7B618CA45D8CD1F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>Allocate Port Service[0000:00:1c.0:pcie03]
>PM: Adding info for pci_express:0000:00:1c.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PM: Adding info for pci_express:0000:00:1c.1:pcie00
>Allocate Port Service[0000:00:1c.1:pcie02]
>PM: Adding info for pci_express:0000:00:1c.1:pcie02
>Allocate Port Service[0000:00:1c.1:pcie03]
>PM: Adding info for pci_express:0000:00:1c.1:pcie03
>PM: Adding info for platform:vesafb.0
>ACPI: SSDT 3F7F7200, 0165 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: SSDT 3F7F7600, 00C4 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>PM: Adding info for No Bus:pnp1
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 915G Chipset.
>agpgart: Detected 7932K stolen memory.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Removing info for No Bus:ttyS1
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 15:840:876
>Freeing unused kernel memory: 244k freed
>Write protecting the kernel read-only data: 824k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000fe00
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fc00
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdffff000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fa00 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fa08 irq 15
>scsi0 : ata_piix
>PM: Adding info for No Bus:host0
>ata1.00: ATA-7: WDC WD800JD-22LSA0, 06.01D06, max UDMA/133
>ata1.00: 156301488 sectors, multi 1: LBA48 
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>PM: Adding info for No Bus:host1
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD800JD-22LS 06.0 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:target1:0:0
>scsi 1:0:0:0: CD-ROM            ATAPI    DVD RW 16XMax    2.50 PQ: 0 ANSI: 5
>PM: Adding info for scsi:1:0:0:0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1173430419.639:2): selinux=0 auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PM: Adding info for platform:floppy.0
>PM: Adding info for No Bus:timer
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>PM: Adding info for No Bus:i2c-0
>input: PC Speaker as /class/input/input3
>tg3.c:v3.74 (February 20, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PM: Adding info for No Bus:eth0
>eth0: Tigon3 [partno(BCM95751) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:01:6c:e4:b1:01
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>pnp: Device 00:03 does not support disabling.
>rtc_cmos: probe of 00:03 failed with error -16
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2048276k swap on /dev/sda3.  Priority:-1 extents:1 across:2048276k
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>audit(1173390846.645:3): audit_pid=1980 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8127 buckets, 65016 max)
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>eth0: no IPv6 routers present
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>

Actions: View

Attachments on bug 230656: 149062 | 149436 | 149659 | 149660