Attachment 150003 Details for Bug 232147 – output of hdparm -iI on FC6 and on Kanotix, dmesg

output of hdparm -iI on FC6 and on Kanotix, dmesg

hdparm-iI_FC6 (text/plain), 5.36 KB, created by goahead on 2007-03-13 23:28:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: goahead

Created: 2007-03-13 23:28:57 UTC

Size: 5.36 KB

patch

obsolete

>FC6_2.6.19-1.2911.6.5
>---------------------
>
>/dev/hda:
>
> Model=SAMSUNG SP2014N, FwRev=VC100-33, SerialNo=S088J10Y542950
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
> BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes:  pio0 pio1 pio2 pio3 pio4 
> DMA modes:  mdma0 mdma1 mdma2 
> UDMA modes: udma0 udma1 *udma2 
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: unknown:  ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
>
> * signifies the current active mode
>
>
>ATA device, with non-removable media
>	Model Number:       SAMSUNG SP2014N                         
>	Serial Number:      S088J10Y542950      
>	Firmware Revision:  VC100-33
>Standards:
>	Used: Reserved 
>	Supported: 7 6 5 4 
>Configuration:
>	Logical		max	current
>	cylinders	16383	65535
>	heads		16	1
>	sectors/track	63	63
>	--
>	CHS current addressable sectors:    4128705
>	LBA    user addressable sectors:  268435455
>	LBA48  user addressable sectors:  390721968
>	device size with M = 1024*1024:      190782 MBytes
>	device size with M = 1000*1000:      200049 MBytes (200 GB)
>Capabilities:
>	LBA, IORDY(can be disabled)
>	Standby timer values: spec'd by Standard, no device specific minimum
>	R/W multiple sector transfer: Max = 16	Current = 16
>	Recommended acoustic management value: 254, current value: 254
>	DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4 udma5 udma6 
>	     Cycle time: min=120ns recommended=120ns
>	PIO: pio0 pio1 pio2 pio3 pio4 
>	     Cycle time: no flow control=240ns  IORDY flow control=120ns
>Commands/features:
>	Enabled	Supported:
>	   *	SMART feature set
>	    	Security Mode feature set
>	   *	Power Management feature set
>	   *	Write cache
>	   *	Look-ahead
>	   *	Host Protected Area feature set
>	   *	WRITE_BUFFER command
>	   *	READ_BUFFER command
>	   *	NOP cmd
>	   *	DOWNLOAD_MICROCODE
>	    	Power-Up In Standby feature set
>	    	SET_FEATURES required to spinup after power up
>	    	SET_MAX security extension
>	   *	Automatic Acoustic Management feature set
>	   *	48-bit Address feature set
>	   *	Device Configuration Overlay feature set
>	   *	Mandatory FLUSH_CACHE
>	   *	FLUSH_CACHE_EXT
>	   *	SMART error logging
>	   *	SMART self-test
>	   *	General Purpose Logging feature set
>Security: 
>	Master password revision code = 65534
>		supported
>	not	enabled
>	not	locked
>	not	frozen
>	not	expired: security count
>		supported: enhanced erase
>	120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE UNIT.
>HW reset results:
>	CBLID- above Vih
>	Device num = 0 determined by the jumper
>Checksum: correct
>=======================================================================================================
>
>
>Kanotix 2005-02
>---------------
>
>/dev/hda:
>
> Model=SAMSUNG SP2014N, FwRev=VC100-33, SerialNo=S088J10Y542950
> Config={ Fixed }
> RawCHS=16383/16/63, TrkSize=34902, SectSize=554, ECCbytes=4
> BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=16
> CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455
> IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
> PIO modes:  pio0 pio1 pio2 pio3 pio4 
> DMA modes:  mdma0 mdma1 mdma2 
> UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
> AdvancedPM=no WriteCache=enabled
> Drive conforms to: unknown: 
>
> * signifies the current active mode
>
>
>ATA device, with non-removable media
>	Model Number:       SAMSUNG SP2014N                         
>	Serial Number:      S088J10Y542950      
>	Firmware Revision:  VC100-33
>Standards:
>	Supported: 7 6 5 4 
>	Likely used: 7
>Configuration:
>	Logical		max	current
>	cylinders	16383	65535
>	heads		16	1
>	sectors/track	63	63
>	--
>	CHS current addressable sectors:    4128705
>	LBA    user addressable sectors:  268435455
>	LBA48  user addressable sectors:  390721968
>	device size with M = 1024*1024:      190782 MBytes
>	device size with M = 1000*1000:      200049 MBytes (200 GB)
>Capabilities:
>	LBA, IORDY(can be disabled)
>	Queue depth: 1
>	Standby timer values: spec'd by Standard, no device specific minimum
>	R/W multiple sector transfer: Max = 16	Current = 16
>	Recommended acoustic management value: 254, current value: 254
>	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
>	     Cycle time: min=120ns recommended=120ns
>	PIO: pio0 pio1 pio2 pio3 pio4 
>	     Cycle time: no flow control=240ns  IORDY flow control=120ns
>Commands/features:
>	Enabled	Supported:
>	   *	NOP cmd
>	   *	READ BUFFER cmd
>	   *	WRITE BUFFER cmd
>	   *	Host Protected Area feature set
>	   *	Look-ahead
>	   *	Write cache
>	   *	Power Management feature set
>		Security Mode feature set
>	   *	SMART feature set
>	   *	FLUSH CACHE EXT command
>	   *	Mandatory FLUSH CACHE command 
>	   *	Device Configuration Overlay feature set 
>	   *	48-bit Address feature set 
>	   *	Automatic Acoustic Management feature set 
>		SET MAX security extension
>		SET FEATURES subcommand required to spinup after power up
>		Power-Up In Standby feature set
>	   *	DOWNLOAD MICROCODE cmd
>	   *	General Purpose Logging feature set
>	   *	SMART self-test 
>	   *	SMART error logging 
>Security: 
>	Master password revision code = 65534
>		supported
>	not	enabled
>	not	locked
>	not	frozen
>	not	expired: security count
>		supported: enhanced erase
>	120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE UNIT.
>HW reset results:
>	CBLID- above Vih
>	Device num = 0 determined by the jumper
>Checksum: correct

Actions: View

Attachments on bug 232147: 150003