Attachment 150067 Details for Bug 232273 – dmesg output with apic errors

dmesg output with apic errors

dmesg (text/plain), 20.62 KB, created by Johannes Köster on 2007-03-14 17:23:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Johannes Köster

Created: 2007-03-14 17:23:32 UTC

Size: 20.62 KB

patch

obsolete

>Linux version 2.6.19-1.2911.6.5_1.fc6.cubbi_suspend2 (root@kobayashi-maru) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Mar 7 10:14:07 CET 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bfd0000 (usable)
> BIOS-e820: 000000001bfd0000 - 000000001bfe5600 (reserved)
> BIOS-e820: 000000001bfe5600 - 000000001bff8000 (ACPI NVS)
> BIOS-e820: 000000001bff8000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>447MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 114640) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114640
>  HighMem    114640 ->   114640
>early_node_map[1] active PFN ranges
>    0:        0 ->   114640
>On node 0 totalpages: 114640
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 863 pages used for memmap
>  Normal zone: 109681 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v002 HP                                    ) @ 0x000f7d20
>ACPI: XSDT (v001 HP     0944     0x12050620 HP   0x00000001) @ 0x1bfe57b4
>ACPI: FADT (v004 HP     0944     0x00000003 HP   0x00000001) @ 0x1bfe5684
>ACPI: MADT (v001 HP     0944     0x00000001 HP   0x00000001) @ 0x1bfe5808
>ACPI: MCFG (v001 HP     0944     0x00000001 HP   0x00000001) @ 0x1bfe586c
>ACPI: TCPA (v002 HP     0944     0x00000001 HP   0x00000001) @ 0x1bfe58a8
>ACPI: SSDT (v001 HP       HPQNLP 0x00000001 MSFT 0x0100000e) @ 0x1bff4606
>ACPI: SSDT (v001 HP     PSSTBLID 0x00000001 HP   0x00000001) @ 0x1bff465f
>ACPI: DSDT (v001 HP        SB400 0x00010000 MSFT 0x0100000e) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>Detected 1795.624 MHz processor.
>Built 1 zonelists.  Total pages: 113745
>Kernel command line: ro root=/dev/system/root rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c081b000 soft=c07fb000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 446568k/458560k available (2253k kernel code, 11460k reserved, 1160k data, 244k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xdc800000 - 0xff7fe000   ( 559 MB)
>    lowmem  : 0xc0000000 - 0xdbfd0000   ( 447 MB)
>      .init : 0xc07b9000 - 0xc07f6000   ( 244 kB)
>      .data : 0xc0633554 - 0xc07558f4   (1160 kB)
>      .text : 0xc0400000 - 0xc0633554   (2253 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3596.05 BogoMIPS (lpj=1798029)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000 00000000 00002001 00000000 00000019
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff ebd3fbff 00000000 00000410 00002001 00000000 00000019
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>Early unpacking initramfs... done
>ACPI: Core revision 20060707
>ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
>ACPI Error (psloop-0196): Found unknown opcode FD at AML address dc80474a offset C7, ignoring [20060707]
>ACPI Error (psloop-0196): Found unknown opcode FD at AML address dc80474a offset C7, ignoring [20060707]
>CPU0: AMD Mobile AMD Sempron(tm) Processor 3500+ stepping 02
>Total of 1 processors activated (3596.05 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2499k freed
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C074] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.C074] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C074._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C074.C075._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C074.C0DF._PRT]
>ACPI: Power Resource [C21F] (off)
>ACPI: Power Resource [C213] (on)
>ACPI: PCI Interrupt Link [C125] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C126] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C127] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C128] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C129] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12A] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [C12B] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C12C] (IRQs *10 11)
>ACPI: Power Resource [C344] (off)
>ACPI: Power Resource [C345] (off)
>ACPI: Power Resource [C346] (off)
>ACPI: Power Resource [C347] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:14.2
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0x40b-0x40b has been reserved
>pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:0a: ioport range 0x8000-0x802f could not be reserved
>pnp: 00:0a: ioport range 0x8100-0x811f could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 6000-6fff
>  MEM window: d0300000-d03fffff
>  PREFETCH window: c0000000-c3ffffff
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: c4000000-c40fffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 34000000-35ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 1000-1fff
>  MEM window: d0000000-d02fffff
>  PREFETCH window: 30000000-31ffffff
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1173891012.819:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 591883D0D2846D46
>- User ID: ATrpms (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[5a38:1002] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>Allocate Port Service[0000:00:06.0:pcie03]
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - No ACPI _OSC support
>aer: probe of 0000:00:06.0:pcie01 failed with error 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>ACPI: Transitioning device [C348] to D3
>ACPI: Transitioning device [C348] to D3
>ACPI: Fan [C348] (off)
>ACPI: Transitioning device [C349] to D3
>ACPI: Transitioning device [C349] to D3
>ACPI: Fan [C349] (off)
>ACPI: Transitioning device [C34A] to D3
>ACPI: Transitioning device [C34A] to D3
>ACPI: Fan [C34A] (off)
>ACPI: Transitioning device [C34B] to D3
>ACPI: Transitioning device [C34B] to D3
>ACPI: Fan [C34B] (off)
>ACPI: Processor [C000] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI: Thermal Zone [TZ1] (25 C)
>ACPI: Thermal Zone [TZ2] (19 C)
>ACPI: Thermal Zone [TZ3] (20 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 17
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:DMA, hdb:pio
>ATIIXP: simplex device: DMA disabled
>ide1: ATIIXP Bus-Master DMA disabled (BIOS)
>Probing IDE interface ide0...
>hda: PIONEER DVDRW DVR-K16, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:30b0]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:04.0, mfunc 0x01a11002, devctl 0x64
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
>cs: IO port probe 0x1000-0x1fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd02fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x31ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:C210,PNP0f13:C211] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3500+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x11
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x18
>powernow-k8: ph2 null fid transition 0xa
>Using IPI No-Shortcut mode
>Suspend v2.2.9.3
>Suspend2 Userspace Storage Manager support registered.
>Suspend2 Userspace UI support registered.
>Suspend2 Compressor support registered.
>Suspend2 Encryptor support registered.
>Suspend2 Block I/O support registered.
>Suspend2 Swap Allocator support registered.
>Suspend2 File Allocator support registered.
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 244k freed
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>synaptics reset failed
>synaptics reset failed
>synaptics reset failed
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xd0401000
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xd0402000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 18, io mem 0xd0403000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:12.0: version 2.0
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 17
>ata1: SATA max UDMA/100 cmd 0xDC84E080 ctl 0xDC84E08A bmdma 0xDC84E000 irq 17
>ata2: SATA max UDMA/100 cmd 0xDC84E0C0 ctl 0xDC84E0CA bmdma 0xDC84E008 irq 17
>scsi0 : sata_sil
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 117231408 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : sata_sil
>usb 2-1: configuration #1 chosen from 1 choice
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      HTS541060G9SA00  MB3O PQ: 0 ANSI: 5
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>Suspend2: Resume2 parameter is empty. Suspending will be disabled.
>Suspend2: SwapAllocator: Signature found.
>Suspend2: Resuming enabled.
>Suspend2: Normal swapspace found.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1173891021.801:2): selinux=0 auid=4294967295
>ACPI: PCI Interrupt 0000:02:04.2[A] -> GSI 20 (level, low) -> IRQ 16
>tpm_inf_pnp 00:02: Found C1FF with ID IFX0102
>tpm_inf_pnp 00:02: TPM found: config base 0x520, io base 0x530, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:04.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:02:04.3[A] -> GSI 20 (level, low) -> IRQ 16
>mmc0: SDHCI at 0xd0019000 irq 16 PIO
>EDAC MC: Ver: 2.0.1 Mar  7 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 19
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:15:60:ca:b5:83
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2000kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /class/input/input2
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 17
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Floppy drive(s): fd0 is 1.44M
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
>cs: IO port probe 0xa00-0xaff: clean.
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [C1BC] (off-line)
>ACPI: Battery Slot [C1BE] (battery present)
>ACPI: Battery Slot [C1BD] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [C256]
>ACPI: Lid Switch [C257]
>ibm_acpi: ec object not found
>ACPI: Video Device [C076] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 892920k swap on /dev/system/swap.  Priority:-1 extents:1 across:892920k
>Time: acpi_pm clocksource has been installed.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (3582 buckets, 28656 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>PM: Writing back config space on device 0000:02:01.0 at offset c (was fdff0000, writing 0)
>PM: Writing back config space on device 0000:02:01.0 at offset b (was 3ed173b, writing 30b0103c)
>PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4010)
>PM: Writing back config space on device 0000:02:01.0 at offset 2 (was 2000000, writing 2000003)
>PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2b00000, writing 2b00006)
>PM: Writing back config space on device 0000:02:01.0 at offset 0 (was 3ed173b, writing 169c14e4)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>eth0: no IPv6 routers present
>APIC error on CPU0: 00(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)
>APIC error on CPU0: 40(40)

Actions: View

Attachments on bug 232273: 150067