Attachment 150102 Details for Bug 232360 – dmesg

dmesg

01.dmesg (text/plain), 16.00 KB, created by Pete Zaitcev on 2007-03-14 23:36:55 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Pete Zaitcev

Created: 2007-03-14 23:36:55 UTC

Size: 16.00 KB

patch

obsolete

>:  Initializing.
><6>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
><6>CPU: L2 Cache: 512K (64 bytes/line)
><6>CPU 0/0 -> Node 0
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 28k freed
><6>ACPI: Core revision 20070126
><3>..MP-BIOS bug: 8254 timer not connected to IO-APIC
><6>Using local APIC timer interrupts.
><4>result 12469175
><6>Detected 12.469 MHz APIC timer.
><6>Brought up 1 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=88 bytes
><7>sizeof(inode)=1008 bytes
><7>sizeof(dentry)=248 bytes
><7>sizeof(ext3inode)=1376 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=3776 bytes
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5525k freed
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using MMCONFIG at e0000000 - e09fffff
><5>PCI: No mmconfig possible on device 00:18
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><7>Boot video device is 0000:01:05.0
><6>PCI: Transparent bridge - 0000:00:14.4
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 10 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><7>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
><7>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
><6>pnp: 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
><6>pnp: 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
><6>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
><6>pnp: 00:08: ioport range 0x220-0x22f has been reserved
><6>pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:09: iomem range 0xfff00000-0xffffffff has been reserved
><6>pnp: 00:09: iomem range 0xc0004800-0xc0004bff has been reserved
><6>pnp: 00:09: iomem range 0xfed00000-0xfed003ff has been reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 9000-9fff
><6>  MEM window: c0100000-c01fffff
><6>  PREFETCH window: c8000000-cfffffff
><6>PCI: Bridge: 0000:00:05.0
><6>  IO window: disabled.
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:06.0
><6>  IO window: disabled.
><6>  MEM window: c0200000-c02fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:14.4
><6>  IO window: disabled.
><6>  MEM window: c0300000-c03fffff
><6>  PREFETCH window: disabled.
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
><4>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
><6>TCP: Hash tables configured (established 65536 bind 65536)
><6>TCP reno registered
><6>audit: initializing netlink socket (disabled)
><5>audit(1173884610.438:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><6>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key C9ECE0B419686A9C
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:05.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:05.0:pcie00]
><7>Allocate Port Service[0000:00:05.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:06.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:06.0:pcie00]
><7>Allocate Port Service[0000:00:06.0:pcie02]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
><6>ACPI: Thermal Zone [THRM] (44 C)
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><6>powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology MK-36 processors (version 2.00.00)
><6>powernow-k8:    0 : fid 0xc (2000 MHz), vid 0xe
><6>powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x10
><6>powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x12
><6>powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x18
><6>Freeing unused kernel memory: 332k freed
><6>Time: acpi_pm clocksource has been installed.
><4>Write protecting the kernel read-only data: 1050k
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><6>loop: loaded (max 8 devices)
><6>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x180b1, caps: 0xa04713/0x200000
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-alpha (2006/12/12) Phillip Lougher
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
><6>ehci_hcd 0000:00:13.5: EHCI Host Controller
><6>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:13.5: debug port 1
><6>ehci_hcd 0000:00:13.5: irq 19, io mem 0xc0004400
><6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 10 ports detected
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><6>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
><6>ohci_hcd 0000:00:13.0: OHCI Host Controller
><6>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:13.0: irq 16, io mem 0xc0005000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
><6>ohci_hcd 0000:00:13.1: OHCI Host Controller
><6>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
><6>ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
><6>ohci_hcd 0000:00:13.2: OHCI Host Controller
><6>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
><6>ohci_hcd 0000:00:13.2: irq 18, io mem 0xc0007000
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
><6>ohci_hcd 0000:00:13.3: OHCI Host Controller
><6>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
><6>ohci_hcd 0000:00:13.3: irq 17, io mem 0xc0008000
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
><6>ohci_hcd 0000:00:13.4: OHCI Host Controller
><6>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
><6>ohci_hcd 0000:00:13.4: irq 18, io mem 0xc0009000
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 21 (level, low) -> IRQ 21
><6>ssb: Sonics Silicon Backplane found on PCI device 0000:08:00.0
><4>ssb: Unsupported SPROM revision 16 detected. Will extract v1
><6>b44.c:v2.0
><6>eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:19:b9:58:7a:d6
><7>libata version 2.10 loaded.
><6>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:14.1 to 64
><6>ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000018420 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000018428 irq 15
><6>scsi0 : pata_atiixp
><6>ata1.00: ATAPI, max UDMA/33
><6>ata1.00: configured for UDMA/33
><6>scsi1 : pata_atiixp
><5>scsi 0:0:0:0: CD-ROM            TSSTcorp CDRW/DVD TSL462D DE01 PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:12.0: version 2.0
><6>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
><6>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
><6>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xffffc2000003e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata4: SATA max UDMA/133 cmd 0xffffc2000003e180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata5: SATA max UDMA/133 cmd 0xffffc2000003e200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>ata6: SATA max UDMA/133 cmd 0xffffc2000003e280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2301
><6>scsi2 : ahci
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><4>ata3.00: qc timeout (cmd 0xec)
><4>ata3.00: failed to IDENTIFY (I/O error, err_mask=0x104)
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>scsi3 : ahci
><6>ata4: SATA link down (SStatus 0 SControl 300)
><6>scsi4 : ahci
><6>ata5: SATA link down (SStatus 0 SControl 300)
><6>scsi5 : ahci
><6>ata6: SATA link down (SStatus 0 SControl 300)
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>b44: eth0: Link is up at 100 Mbps, full duplex.
><6>b44: eth0: Flow control is off for TX and off for RX.
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><6>security:  3 users, 6 roles, 1665 types, 208 bools, 1 sens, 1024 cats
><6>security:  59 classes, 58865 rules
><6>security:  class dccp_socket not defined in policy
><6>security:  permission dccp_recv in class node not defined in policy
><6>security:  permission dccp_send in class node not defined in policy
><6>security:  permission dccp_recv in class netif not defined in policy
><6>security:  permission dccp_send in class netif not defined in policy
><6>SELinux:  Completing initialization.
><6>SELinux:  Setting up existing superblocks.
><6>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><6>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><6>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><6>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><6>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><6>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><6>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><6>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><6>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><6>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><6>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><6>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><6>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><6>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><6>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><6>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><6>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1173886790.939:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  6132.000 MB/sec
><4>raid5: using function: generic_sse (6132.000 MB/sec)
><4>raid6: int64x1   1785 MB/s
><4>raid6: int64x2   2167 MB/s
><4>raid6: int64x4   1601 MB/s
><4>raid6: int64x8   1742 MB/s
><4>raid6: sse2x1    2656 MB/s
><4>raid6: sse2x2    3609 MB/s
><4>raid6: sse2x4    3750 MB/s
><4>raid6: using algorithm sse2x4 (3750 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Feb 26 2007 18:42:31) installed
><6>Lock_Nolock (built Feb 26 2007 18:43:08) installed
><6>JFS: nTxBlock = 6913, nTxLock = 55310
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1173886793.451:3): audit_pid=688 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>usb 3-1: new full speed USB device using ohci_hcd and address 2
><6>usb 3-1: configuration #1 chosen from 1 choice

Actions: View

Attachments on bug 232360: 150102 | 150108 | 150109