Attachment 150155 Details for Bug 232490 – dmesg output for 2.6.19-1.2911.6.5.fc6

dmesg output for 2.6.19-1.2911.6.5.fc6

dmesg (text/plain), 18.02 KB, created by Michal Jaegermann on 2007-03-15 19:02:03 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2007-03-15 19:02:03 UTC

Size: 18.02 KB

patch

obsolete

>Linux version 2.6.20-1.2925.fc6 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Mar 10 18:38:39 EST 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 acpi=off irqpoll  selinux=0
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1321 pages reserved
>  DMA zone: 2614 pages, LIFO batch:0
>  DMA32 zone: 8126 pages used for memmap
>  DMA32 zone: 511986 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID:  MPTABLE: APIC at: 0xFEE00000
>Processor #0 (Bootup-CPU)
>Processor #1
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to physical flat
>Processors: 2
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f700000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514600
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 acpi=off irqpoll  selinux=0
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 383e000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2052648k/2096832k available (2448k kernel code, 43796k reserved, 1456k data, 316k init)
>Calibrating delay using timer specific routine.. 4899.36 BogoMIPS (lpj=2449682)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ExtINT not setup in hardware but reported by MP table
>Using local APIC timer interrupts.
>result 12528685
>Detected 12.528 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.25 BogoMIPS (lpj=2405128)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 582 cycles)
>Brought up 2 CPUs
>time.c: Using 1.193182 MHz WALL PIT GTOD PIT/TSC timer.
>time.c: Detected 2405.505 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=337
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Using IRQ router default [1002/438d] at 0000:00:14.3
>PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 21
>PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18
>PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17
>PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 23
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: fbd00000-fbdfffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: d000-dfff
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: e000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2365k freed
>audit: initializing netlink socket (disabled)
>audit(1173981546.418:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 7B88EE5B4ADA4319
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SB600_PATA: IDE controller at PCI slot 0000:00:14.1
>SB600_PATA: chipset revision 0
>SB600_PATA: 100% native mode on irq 16
>    ide0: BM-DMA at 0x7000-0x7007, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: LITE-ON DVDRW LH-20A1P, ATAPI CD/DVD-ROM drive
>ide0 at 0xb000-0xb007,0xa002 on irq 16
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1042k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbcff000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbcfe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbcfd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbcfc000
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbcfb000
>usb 2-1: configuration #1 chosen from 1 choice
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbcfac00
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 10 ports detected
>usb 2-1: USB disconnect, address 2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:12.0: version 2.0
>usb 6-9: new high speed USB device using ehci_hcd and address 4
>usb 6-9: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC20000018100 ctl 0x0 bmdma 0x0 irq 2301
>ata2: SATA max UDMA/133 cmd 0xFFFFC20000018180 ctl 0x0 bmdma 0x0 irq 2301
>ata3: SATA max UDMA/133 cmd 0xFFFFC20000018200 ctl 0x0 bmdma 0x0 irq 2301
>ata4: SATA max UDMA/133 cmd 0xFFFFC20000018280 ctl 0x0 bmdma 0x0 irq 2301
>scsi0 : ahci
>usb 2-1: new full speed USB device using ohci_hcd and address 4
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new low speed USB device using ohci_hcd and address 5
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
>sd 1:0:0:0: Attached scsi disk sdb
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl IDE mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xFFFFC2000001C100 ctl 0x0 bmdma 0x0 irq 17
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 5:0:0:0: Attached scsi removable disk sdc
>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 5:0:0:1: Attached scsi removable disk sdd
>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 5:0:0:2: Attached scsi removable disk sde
>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 5:0:0:3: Attached scsi removable disk sdf
>usb-storage: device scan complete
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x043D pid 0x000C
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>skge 1.9 addr 0xfbffc000 irq 23 chip Yukon-Lite rev 9
>skge eth0: addr 00:18:f3:46:e2:34
>EDAC MC: Ver: 2.0.1 Mar 10 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:1: Attached scsi generic sg3 type 0
>sd 5:0:0:2: Attached scsi generic sg4 type 0
>sd 5:0:0:3: Attached scsi generic sg5 type 0
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>FDC 0 is a post-1991 82077
>lp: driver loaded but no devices found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>loop: loaded (max 8 devices)
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 987988k swap on /dev/sda2.  Priority:10 extents:1 across:987988k
>Adding 987988k swap on /dev/sdb2.  Priority:10 extents:1 across:987988k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 1000 Mbps, full duplex, flow control none
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>i2c /dev entries driver
>it87: Found IT8716F chip at 0xe80, revision 0
>it87: in3 is VCC (+5V)
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>mtrr: no MTRR for d0000000,8000000 found
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>hda: packet command error: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hda: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request.

Actions: View

Attachments on bug 232490: 150155 | 150806