Attachment 150236 Details for Bug 232660 – jmicron JMB361/363 controller patch

jmicron JMB361/363 controller patch

jmicron-dualfn-pata.patch (text/x-patch), 7.19 KB, created by Linda Wang on 2007-03-16 15:12:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Linda Wang

Created: 2007-03-16 15:12:47 UTC

Size: 7.19 KB

patch

obsolete

>--- linux-2.6.9/include/linux/pci.h.orig	2007-03-16 06:24:40.000000000 +0800
>+++ linux-2.6.9/include/linux/pci.h	2007-03-16 06:24:40.000000000 +0800
>@@ -1018,11 +1018,17 @@
> };
> 
> enum pci_fixup_pass {
>+	pci_fixup_early,	/* Before probing BARs */
> 	pci_fixup_header,	/* Called immediately after reading configuration header */
> 	pci_fixup_final,	/* Final phase of device fixups */
> };
> 
> /* Anonymous variables would be nice... */
>+#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook)					\
>+	static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__	\
>+	__attribute__((__section__(".pci_fixup_early"))) = {				\
>+		vendor, device, hook };
>+
> #define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook)					\
> 	static struct pci_fixup __pci_fixup_##vendor##device##hook __attribute_used__	\
> 	__attribute__((__section__(".pci_fixup_header"))) = {				\
>--- linux-2.6.9/include/asm-generic/vmlinux.lds.h.orig	2007-03-16 07:33:30.000000000 +0800
>+++ linux-2.6.9/include/asm-generic/vmlinux.lds.h	2007-03-16 08:03:32.000000000 +0800
>@@ -18,6 +18,9 @@
> 									\
> 	/* PCI quirks */						\
> 	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
>+		VMLINUX_SYMBOL(__start_pci_fixups_early) = .;		\
>+		*(.pci_fixup_early)					\
>+		VMLINUX_SYMBOL(__end_pci_fixups_early) = .;		\
> 		VMLINUX_SYMBOL(__start_pci_fixups_header) = .;		\
> 		*(.pci_fixup_header)					\
> 		VMLINUX_SYMBOL(__end_pci_fixups_header) = .;		\
>--- linux-2.6.9/drivers/pci/quirks.c.orig	2007-03-16 06:14:49.000000000 +0800
>+++ linux-2.6.9/drivers/pci/quirks.c	2007-03-16 06:58:41.000000000 +0800
>@@ -1189,6 +1189,55 @@
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_963,		quirk_sis_96x_smbus );
> DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI,	PCI_DEVICE_ID_SI_LPC,		quirk_sis_96x_smbus );
> 
>+#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
>+
>+/*
>+ *	If we are using libata we can drive this chip properly but must
>+ *	do this early on to make the additional device appear during
>+ *	the PCI scanning.
>+ */
>+
>+static void quirk_jmicron_dualfn(struct pci_dev *pdev)
>+{
>+	u32 conf;
>+	u8 hdr;
>+
>+	/* Only poke fn 0 */
>+	if (PCI_FUNC(pdev->devfn))
>+		return;
>+
>+	switch(pdev->device) {
>+		case PCI_DEVICE_ID_JMICRON_JMB365:
>+		case PCI_DEVICE_ID_JMICRON_JMB366:
>+			/* Redirect IDE second PATA port to the right spot */
>+			pci_read_config_dword(pdev, 0x80, &conf);
>+			conf |= (1 << 24);
>+			/* Fall through */
>+			pci_write_config_dword(pdev, 0x80, conf);
>+		case PCI_DEVICE_ID_JMICRON_JMB361:
>+		case PCI_DEVICE_ID_JMICRON_JMB363:
>+			pci_read_config_dword(pdev, 0x40, &conf);
>+			/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
>+			/* Set the class codes correctly and then direct IDE 0 */
>+			conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
>+			conf |=  0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
>+			pci_write_config_dword(pdev, 0x40, conf);
>+
>+			/* Reconfigure so that the PCI scanner discovers the
>+			   device is now multifunction */
>+
>+			pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
>+			pdev->hdr_type = hdr & 0x7f;
>+			pdev->multifunction = !!(hdr & 0x80);
>+
>+			break;
>+	}
>+}
>+
>+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
>+
>+#endif
>+
> #ifdef CONFIG_X86_IO_APIC
> static void __init quirk_alder_ioapic(struct pci_dev *pdev)
> {
>@@ -1452,6 +1501,8 @@
> 	}
> }
> 
>+extern struct pci_fixup __start_pci_fixups_early[];
>+extern struct pci_fixup __end_pci_fixups_early[];
> extern struct pci_fixup __start_pci_fixups_header[];
> extern struct pci_fixup __end_pci_fixups_header[];
> extern struct pci_fixup __start_pci_fixups_final[];
>@@ -1462,6 +1513,11 @@
> 	struct pci_fixup *start, *end;
> 
> 	switch(pass) {
>+	case pci_fixup_early:
>+		start = __start_pci_fixups_early;
>+		end = __end_pci_fixups_early;
>+		break;
>+
> 	case pci_fixup_header:
> 		start = __start_pci_fixups_header;
> 		end = __end_pci_fixups_header;
>--- linux-2.6.9/drivers/pci/probe.c.orig	2007-03-16 06:17:08.000000000 +0800
>+++ linux-2.6.9/drivers/pci/probe.c	2007-03-16 06:19:22.000000000 +0800
>@@ -492,6 +492,10 @@
> 	/* "Unknown power state" */
> 	dev->current_state = 4;
> 
>+	/* Early fixups, before probing the BARs */
>+	pci_fixup_device(pci_fixup_early, dev);
>+	class = dev->class >> 8;
>+
> 	switch (dev->hdr_type) {		    /* header type */
> 	case PCI_HEADER_TYPE_NORMAL:		    /* standard header */
> 		if (class == PCI_CLASS_BRIDGE_PCI)
>--- linux-2.6.9/drivers/ide/pci/generic.c.orig	2007-03-16 06:09:52.000000000 +0800
>+++ linux-2.6.9/drivers/ide/pci/generic.c	2007-03-16 06:31:48.000000000 +0800
>@@ -123,10 +123,18 @@
> 	    (!(PCI_FUNC(dev->devfn) & 1)))
> 		return -EAGAIN;
> 
>-	pci_read_config_word(dev, PCI_COMMAND, &command);
>-	if(!(command & PCI_COMMAND_IO)) {
>-		printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
>-		return -ENODEV; 
>+	if (dev->vendor == PCI_VENDOR_ID_JMICRON) {
>+		if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 && PCI_FUNC(dev->devfn) != 1)
>+			return -ENODEV;
>+	}
>+
>+
>+	if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
>+		pci_read_config_word(dev, PCI_COMMAND, &command);
>+		if(!(command & PCI_COMMAND_IO)) {
>+			printk(KERN_INFO "Skipping disabled %s IDE controller.\n", d->name);
>+			return -ENODEV; 
>+		}
> 	}
> 	ide_setup_pci_device(dev, d);
> 	return 0;
>@@ -153,6 +161,11 @@
> 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO,     PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11},
> 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_1,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12},
> 	{ PCI_VENDOR_ID_TOSHIBA,PCI_DEVICE_ID_TOSHIBA_PICCOLO_2,   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13},
>+	{ PCI_VENDOR_ID_JMICRON,PCI_DEVICE_ID_JMICRON_JMB361,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14},
>+	{ PCI_VENDOR_ID_JMICRON,PCI_DEVICE_ID_JMICRON_JMB363,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 15},
>+	{ PCI_VENDOR_ID_JMICRON,PCI_DEVICE_ID_JMICRON_JMB365,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 16},
>+	{ PCI_VENDOR_ID_JMICRON,PCI_DEVICE_ID_JMICRON_JMB366,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 17},
>+	{ PCI_VENDOR_ID_JMICRON,PCI_DEVICE_ID_JMICRON_JMB368,	   PCI_ANY_ID, PCI_ANY_ID, 0, 0, 18},
> 	/* Must come last. If you add entries adjust this table appropriately and the init_one code */
> 	{ PCI_ANY_ID,		PCI_ANY_ID,			   PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0},
> 	{ 0, },
>--- linux-2.6.9/drivers/ide/pci/generic.h.orig	2007-03-16 06:09:52.000000000 +0800
>+++ linux-2.6.9/drivers/ide/pci/generic.h	2007-03-16 06:31:48.000000000 +0800
>@@ -108,6 +108,41 @@
> 		.channels	= 2,
> 		.autodma	= NOAUTODMA,
> 		.bootable	= ON_BOARD,
>+	},{	/* 14 */
>+		.name 		= "JMB361",
>+		.init_chipset	= init_chipset_generic,
>+		.init_hwif	= init_hwif_generic,
>+		.channels	= 2,
>+		.autodma	= AUTODMA,
>+		.bootable	= OFF_BOARD,
>+	},{	/* 15 */
>+		.name 		= "JMB363",
>+		.init_chipset	= init_chipset_generic,
>+		.init_hwif	= init_hwif_generic,
>+		.channels	= 2,
>+		.autodma	= AUTODMA,
>+		.bootable	= OFF_BOARD,
>+	},{	/* 16 */
>+		.name 		= "JMB365",
>+		.init_chipset	= init_chipset_generic,
>+		.init_hwif	= init_hwif_generic,
>+		.channels	= 2,
>+		.autodma	= AUTODMA,
>+		.bootable	= OFF_BOARD,
>+	},{	/* 17 */
>+		.name 		= "JMB366",
>+		.init_chipset	= init_chipset_generic,
>+		.init_hwif	= init_hwif_generic,
>+		.channels	= 2,
>+		.autodma	= AUTODMA,
>+		.bootable	= OFF_BOARD,
>+	},{	/* 18 */
>+		.name 		= "JMB368",
>+		.init_chipset	= init_chipset_generic,
>+		.init_hwif	= init_hwif_generic,
>+		.channels	= 2,
>+		.autodma	= AUTODMA,
>+		.bootable	= OFF_BOARD,
> 	}
> };
>

Actions: View

Attachments on bug 232660: 150236