Attachment 150243 Details for Bug 232656 – dmesg for kernel 2.6.20

dmesg for kernel 2.6.20

dmesg-2.6.20 (text/plain), 23.05 KB, created by Need Real Name on 2007-03-16 15:52:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Need Real Name

Created: 2007-03-16 15:52:14 UTC

Size: 23.05 KB

patch

obsolete

>Linux version 2.6.20-1.2925.fc6 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Mar 10 19:15:16 EST 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009cc00 end: 000000000009cc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009cc00 size: 0000000000003400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000005feec000 end: 000000005ffec000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000005ffec000 size: 0000000000003000 end: 000000005ffef000 type: 3
>copy_e820_map() start: 000000005ffef000 size: 0000000000010000 end: 000000005ffff000 type: 2
>copy_e820_map() start: 000000005ffff000 size: 0000000000001000 end: 0000000060000000 type: 4
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
> BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005ffec000 (usable)
> BIOS-e820: 000000005ffec000 - 000000005ffef000 (ACPI data)
> BIOS-e820: 000000005ffef000 - 000000005ffff000 (reserved)
> BIOS-e820: 000000005ffff000 - 0000000060000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>639MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 393196) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   393196
>early_node_map[1] active PFN ranges
>    0:        0 ->   393196
>On node 0 totalpages: 393196
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 1599 pages used for memmap
>  HighMem zone: 162221 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 ASUS                                  ) @ 0x000f5360
>ACPI: RSDT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x5ffec000
>ACPI: FADT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x5ffec0c0
>ACPI: BOOT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x5ffec030
>ACPI: MADT (v001 ASUS   P4PE     0x42302e31 MSFT 0x31313031) @ 0x5ffec058
>ACPI: DSDT (v001   ASUS P4PE     0x00001000 MSFT 0x0100000b) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 22 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
>Detected 2539.166 MHz processor.
>Built 1 zonelists.  Total pages: 389357
>Kernel command line: ro root=LABEL=rootA rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07aa000 soft=c078a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1549360k/1572784k available (2187k kernel code, 22132k reserved, 1157k data, 236k init, 655280k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074a000 - 0xc0785000   ( 236 kB)
>      .data : 0xc0622ca1 - 0xc0744494   (1157 kB)
>      .text : 0xc0400000 - 0xc0622ca1   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5080.64 BogoMIPS (lpj=2540321)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 00003080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04
>Total of 1 processors activated (5080.64 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf1e60, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI: Enabled i801 SMBus device
>PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 17 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
>pnp: 00:02: ioport range 0xe800-0xe81f has been reserved
>pnp: 00:02: ioport range 0xec00-0xec3f has been reserved
>pnp: 00:02: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:10: ioport range 0x3f0-0x3f1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ed000000-edffffff
>  PREFETCH window: ef700000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-bfff
>  MEM window: ea800000-ec7fffff
>  PREFETCH window: ee000000-ef6fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1533k freed
>Simple Boot Flag at 0x3a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1174044457.669:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CB44B0DE33F9027F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Invalid PBLK length [5]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 845G Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>ICH4: chipset revision 2
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: WDC WD1200JB-75CRA0, ATA DISK drive
>hdb: WDC WD1200JB-75CRA0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
>hdd: PLEXTOR DVDR PX-712A, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: Host Protected Area detected.
>	current capacity is 234375000 sectors (120000 MB)
>	native  capacity is 234441648 sectors (120034 MB)
>hda: Host Protected Area disabled.
>hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 >
>hdb: max request size: 128KiB
>hdb: Host Protected Area detected.
>	current capacity is 234375000 sectors (120000 MB)
>	native  capacity is 234441648 sectors (120034 MB)
>hdb: Host Protected Area disabled.
>hdb: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
>hdb: cache flushes not supported
> hdb: hdb1 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 >
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Time: tsc clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000d800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:00:1d.7 (0004 -> 0006)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xec800000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>SCSI subsystem initialized
>usb 1-1: new low speed USB device using uhci_hcd and address 3
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: table: 253:0: linear: dm-linear: Device lookup failed
>device-mapper: ioctl: error adding target to table
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 1-1: configuration #1 chosen from 1 choice
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 900 FW:9.o1 .D USB FW:o1 ] on usb-0000:00:1d.0-1
>audit(1174044466.757:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1604 types, 175 bools, 1 sens, 1024 cats
>security:  59 classes, 50495 rules
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda7, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1174044467.022:3): policy loaded auid=4294967295
>gameport: NS558 PnP Gameport is pnp00:0f/gameport0, io 0x200, speed 784kHz
>intel_rng: FWH not detected
>tg3.c:v3.72 (January 8, 2007)
>PCI: Enabling device 0000:02:05.0 (0014 -> 0016)
>ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 20 (level, low) -> IRQ 20
>eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:e0:18:b5:41:e1
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
>iTCO_vendor_support: vendor-support=0
>sata_promise 0000:02:04.0: version 1.05
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 23 (level, low) -> IRQ 19
>ata1: SATA max UDMA/133 cmd 0xF8838200 ctl 0xF8838238 bmdma 0x0 irq 19
>ata2: SATA max UDMA/133 cmd 0xF8838280 ctl 0xF88382B8 bmdma 0x0 irq 19
>scsi0 : sata_promise
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Linux video capture interface: v2.00
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x6460)
>iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>input: PC Speaker as /class/input/input3
>hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : sata_promise
>nvidia: no version for "struct_module" found: kernel tainted.
>nvidia: module license 'NVIDIA' taints kernel.
>ieee1394: Initialized config rom entry `ip1394'
>ata2: SATA link down (SStatus 0 SControl 0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Enabling device 0000:02:03.0 (0094 -> 0097)
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 22 (level, low) -> IRQ 22
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[22]  MMIO=[ec000000-ec0007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-9631  Thu Nov  9 17:38:10 PST 2006
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>PCI: Enabling device 0000:02:0a.0 (0004 -> 0006)
>ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
>bttv0: Bt878 (rev 17) at 0000:02:0a.0, irq: 22, latency: 32, mmio: 0xee800000
>bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606
>bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00bf7307 [init]
>bttv0: using tuner=5
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>bt878: Unknown symbol bttv_read_gpio
>bt878: Unknown symbol bttv_write_gpio
>bt878: Unknown symbol bttv_gpio_enable
>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>input: bttv IR (card=34) as /class/input/input4
>PCI: Enabling device 0000:02:0a.1 (0004 -> 0006)
>ACPI: PCI Interrupt 0000:02:0a.1[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Enabling device 0000:00:1f.5 (0004 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>Floppy drive(s): fd0 is 1.44M
>AC'97 0 analog subsections not ready
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e01800000a9098]
>intel8x0_measure_ac97_clock: measured 51073 usecs
>intel8x0: clocking to 48000
>FDC 0 is a post-1991 82077
>lirc_dev: IR Remote Control driver registered, at major 61 
>The bttv_* interface is obsolete and will go away,
>please use the new, sysfs based interface instead.
>lirc_gpio (-1): card type 0x22, id 0x6606107d
>lirc_dev: lirc_register_plugin: sample_rate: 0
>lirc_gpio (0): driver registered
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it!
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>audit(1174058888.233:4): enforcing=0 old_enforcing=1 auid=4294967295
>atkbd.c: Unknown key released (translated set 2, code 0x81 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e001 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>EXT3 FS on hda7, internal journal
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.

Actions: View

Attachments on bug 232656: 150241 | 150243 | 150244 | 150245