Attachment 150281 Details for Bug 231006 – rawhide anaconda.syslog

rawhide anaconda.syslog

anaconda.syslog (text/plain), 44.36 KB, created by Russell Harrison on 2007-03-16 21:31:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Russell Harrison

Created: 2007-03-16 21:31:22 UTC

Size: 44.36 KB

patch

obsolete

><5>Linux version 2.6.20-1.2990.fc7 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.2 20070312 (Red Hat 4.1.2-4)) #1 SMP Thu Mar 15 18:50:39 EDT 2007
><6>Command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
><4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
><4> BIOS-e820: 000000007ffd0000 - 000000007ffe5600 (reserved)
><4> BIOS-e820: 000000007ffe5600 - 000000007fff8000 (ACPI NVS)
><4> BIOS-e820: 000000007fff8000 - 0000000080000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
><4> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
><4> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
><4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
><4> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
><4> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524240) 1 entries of 3200 used
><4>end_pfn_map = 1048576
><6>DMI 2.4 present.
><4>ACPI: RSDP 000F7A10, 0024 (r2 HP    )
><4>ACPI: XSDT 7FFE57C8, 007C (r1 HPQOEM SLIC-MPC        1 HP          1)
><4>ACPI: FACP 7FFE5684, 00F4 (r4 HP     30A3            3 HP          1)
><4>ACPI: DSDT 7FFE5ACC, 10239 (r1 HP       nc8430    10000 MSFT  100000E)
><4>ACPI: FACS 7FFF7E80, 0040
><4>ACPI: SLIC 7FFE5844, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
><4>ACPI: HPET 7FFE59BC, 0038 (r1 HP     30A3            1 HP          1)
><4>ACPI: APIC 7FFE59F4, 0068 (r1 HP     30A3            1 HP          1)
><4>ACPI: MCFG 7FFE5A5C, 003C (r1 HP     30A3            1 HP          1)
><4>ACPI: TCPA 7FFE5A98, 0032 (r2 HP     30A3            1 HP          1)
><4>ACPI: SSDT 7FFF5D05, 0059 (r1 HP       HPQNLP        1 MSFT  100000E)
><4>ACPI: SSDT 7FFF5D5E, 0326 (r1 HP       HPQSAT        1 MSFT  100000E)
><4>ACPI: SSDT 7FFF691B, 025F (r1 HP      Cpu0Tst     3000 INTL 20060317)
><4>ACPI: SSDT 7FFF6B7A, 00A6 (r1 HP      Cpu1Tst     3000 INTL 20060317)
><4>ACPI: SSDT 7FFF6C20, 04D7 (r1 HP        CpuPm     3000 INTL 20060317)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-000000007ffd0000
><7>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 524240) 1 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-000000007ffd0000
><6>No mptable found.
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1048576
><4>early_node_map[2] active PFN ranges
><4>    0:        0 ->      159
><4>    0:      256 ->   524240
><7>On node 0 totalpages: 524143
><7>  DMA zone: 88 pages used for memmap
><7>  DMA zone: 2361 pages reserved
><7>  DMA zone: 1550 pages, LIFO batch:0
><7>  DMA32 zone: 11174 pages used for memmap
><7>  DMA32 zone: 508970 pages, LIFO batch:31
><7>  Normal zone: 0 pages used for memmap
><6>ACPI: PM-Timer IO Port: 0x1008
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
><6>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to physical flat
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Nosave address range: 000000000009f000 - 00000000000a0000
><4>Nosave address range: 00000000000a0000 - 00000000000e0000
><4>Nosave address range: 00000000000e0000 - 0000000000100000
><6>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
><6>SMP: Allowing 2 CPUs, 0 hotplug CPUs
><6>PERCPU: Allocating 44672 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 510520
><5>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>Extended CMOS year: 2000
><6>time.c: Detected 2327.504 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
><4>... MAX_LOCKDEP_SUBCLASSES:    8
><4>... MAX_LOCK_DEPTH:          30
><4>... MAX_LOCKDEP_KEYS:        2048
><4>... CLASSHASH_SIZE:           1024
><4>... MAX_LOCKDEP_ENTRIES:     8192
><4>... MAX_LOCKDEP_CHAINS:      16384
><4>... CHAINHASH_SIZE:          8192
><4> memory used by lock dependency info: 1648 kB
><4> per task-struct memory footprint: 1680 bytes
><4>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><4>Memory: 2033068k/2096960k available (2461k kernel code, 63504k reserved, 1444k data, 328k init)
><4>Calibrating delay using timer specific routine.. 4659.52 BogoMIPS (lpj=2329762)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0 -> Node 0
><4>using mwait in idle threads.
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><7>CPU0: Thermal monitoring handled by SMI
><4>lockdep: not fixing up alternatives.
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><4>result 10390628
><6>Detected 10.390 MHz APIC timer.
><4>lockdep: not fixing up alternatives.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4654.94 BogoMIPS (lpj=2327470)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 CPU         T7600  @ 2.33GHz stepping 06
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=88 bytes
><7>sizeof(inode)=1008 bytes
><7>sizeof(dentry)=248 bytes
><7>sizeof(ext3inode)=1376 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=3776 bytes
><4>migration_cost=36
><7>PM: Adding info for No Bus:platform
><6>NET: Registered protocol family 16
><7>PM: Adding info for No Bus:vtcon0
><6>ACPI: bus type pci registered
><3>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
><3>PCI: Not using MMCONFIG.
><6>PCI: Using configuration type 1
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><7>PM: Adding info for acpi:acpi_system:00
><7>PM: Adding info for acpi:button_power:00
><7>PM: Adding info for acpi:ACPI0007:00
><7>PM: Adding info for acpi:ACPI0007:01
><7>PM: Adding info for acpi:device:00
><7>PM: Adding info for acpi:PNP0C01:00
><7>PM: Adding info for acpi:PNP0A08:00
><7>PM: Adding info for acpi:device:01
><7>PM: Adding info for acpi:video:00
><7>PM: Adding info for acpi:device:02
><7>PM: Adding info for acpi:device:03
><7>PM: Adding info for acpi:device:04
><7>PM: Adding info for acpi:device:05
><7>PM: Adding info for acpi:device:06
><7>PM: Adding info for acpi:device:07
><7>PM: Adding info for acpi:device:08
><7>PM: Adding info for acpi:device:09
><7>PM: Adding info for acpi:device:0a
><7>PM: Adding info for acpi:PNP0C09:00
><7>PM: Adding info for acpi:PNP0A06:00
><7>PM: Adding info for acpi:PNP0501:00
><7>PM: Adding info for acpi:power_resource:00
><7>PM: Adding info for acpi:PNP0401:00
><7>PM: Adding info for acpi:power_resource:01
><7>PM: Adding info for acpi:IFX0102:00
><7>PM: Adding info for acpi:PNP0C04:00
><7>PM: Adding info for acpi:PNP0100:00
><7>PM: Adding info for acpi:PNP0200:00
><7>PM: Adding info for acpi:PNP0800:00
><7>PM: Adding info for acpi:PNP0B00:00
><7>PM: Adding info for acpi:PNP0103:00
><7>PM: Adding info for acpi:PNP0303:00
><7>PM: Adding info for acpi:SYN010D:00
><7>PM: Adding info for acpi:power_resource:02
><7>PM: Adding info for acpi:PNP0000:00
><7>PM: Adding info for acpi:PNP0C02:00
><7>PM: Adding info for acpi:device:0b
><7>PM: Adding info for acpi:device:0c
><7>PM: Adding info for acpi:device:0d
><7>PM: Adding info for acpi:device:0e
><7>PM: Adding info for acpi:device:0f
><7>PM: Adding info for acpi:device:10
><7>PM: Adding info for acpi:device:11
><7>PM: Adding info for acpi:device:12
><7>PM: Adding info for acpi:device:13
><7>PM: Adding info for acpi:device:14
><7>PM: Adding info for acpi:device:15
><7>PM: Adding info for acpi:device:16
><7>PM: Adding info for acpi:device:17
><7>PM: Adding info for acpi:device:18
><7>PM: Adding info for acpi:device:19
><7>PM: Adding info for acpi:device:1a
><7>PM: Adding info for acpi:device:1b
><7>PM: Adding info for acpi:device:1c
><7>PM: Adding info for acpi:device:1d
><7>PM: Adding info for acpi:device:1e
><7>PM: Adding info for acpi:device:1f
><7>PM: Adding info for acpi:device:20
><7>PM: Adding info for acpi:device:21
><7>PM: Adding info for acpi:device:22
><7>PM: Adding info for acpi:device:23
><7>PM: Adding info for acpi:device:24
><7>PM: Adding info for acpi:device:25
><7>PM: Adding info for acpi:device:26
><7>PM: Adding info for acpi:device:27
><7>PM: Adding info for acpi:device:28
><7>PM: Adding info for acpi:device:29
><7>PM: Adding info for acpi:device:2a
><7>PM: Adding info for acpi:device:2b
><7>PM: Adding info for acpi:device:2c
><7>PM: Adding info for acpi:device:2d
><7>PM: Adding info for acpi:device:2e
><7>PM: Adding info for acpi:device:2f
><7>PM: Adding info for acpi:device:30
><7>PM: Adding info for acpi:device:31
><7>PM: Adding info for acpi:device:32
><7>PM: Adding info for acpi:device:33
><7>PM: Adding info for acpi:device:34
><7>PM: Adding info for acpi:device:35
><7>PM: Adding info for acpi:device:36
><7>PM: Adding info for acpi:device:37
><7>PM: Adding info for acpi:device:38
><7>PM: Adding info for acpi:device:39
><7>PM: Adding info for acpi:power_resource:03
><7>PM: Adding info for acpi:PNP0C0F:00
><7>PM: Adding info for acpi:PNP0C0F:01
><7>PM: Adding info for acpi:PNP0C0F:02
><7>PM: Adding info for acpi:PNP0C0F:03
><7>PM: Adding info for acpi:PNP0C0F:04
><7>PM: Adding info for acpi:PNP0C0F:05
><7>PM: Adding info for acpi:PNP0C0F:06
><7>PM: Adding info for acpi:PNP0C0F:07
><7>PM: Adding info for acpi:HPQ0004:00
><7>PM: Adding info for acpi:PNP0C02:01
><7>PM: Adding info for acpi:device:3a
><7>PM: Adding info for acpi:device:3b
><7>PM: Adding info for acpi:HPQ0006:00
><7>PM: Adding info for acpi:PNP0C0A:00
><7>PM: Adding info for acpi:PNP0C0A:01
><7>PM: Adding info for acpi:ACPI0003:00
><7>PM: Adding info for acpi:PNP0C0E:00
><7>PM: Adding info for acpi:PNP0C0D:00
><7>PM: Adding info for acpi:PNP0C14:00
><7>PM: Adding info for acpi:PNP0C02:02
><7>PM: Adding info for acpi:thermal:00
><7>PM: Adding info for acpi:power_resource:04
><7>PM: Adding info for acpi:power_resource:05
><7>PM: Adding info for acpi:power_resource:06
><7>PM: Adding info for acpi:power_resource:07
><7>PM: Adding info for acpi:power_resource:08
><7>PM: Adding info for acpi:power_resource:09
><7>PM: Adding info for acpi:power_resource:0a
><7>PM: Adding info for acpi:PNP0C0B:00
><7>PM: Adding info for acpi:PNP0C0B:01
><7>PM: Adding info for acpi:PNP0C0B:02
><7>PM: Adding info for acpi:PNP0C0B:03
><7>PM: Adding info for acpi:PNP0C0B:04
><7>PM: Adding info for acpi:PNP0C0B:05
><7>PM: Adding info for acpi:PNP0C0B:06
><7>PM: Adding info for acpi:thermal:01
><7>PM: Adding info for acpi:thermal:02
><7>PM: Adding info for acpi:thermal:03
><7>PM: Adding info for acpi:thermal:04
><7>PM: Adding info for acpi:thermal:05
><6>ACPI: PCI Root Bridge [C002] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><7>PM: Adding info for No Bus:pci0000:00
><4>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
><4>PCI quirk: region 1100-113f claimed by ICH6 GPIO
><6>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
><6>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
><6>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
><6>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
><7>Boot video device is 0000:01:00.0
><6>PCI: Transparent bridge - 0000:00:1e.0
><4>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
><4>Please report the result to linux-kernel to fix this permanently
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C083._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C098._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C103._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C113._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C119._PRT]
><7>PM: Adding info for pci:0000:00:00.0
><7>PM: Adding info for pci:0000:00:01.0
><7>PM: Adding info for pci:0000:00:1b.0
><7>PM: Adding info for pci:0000:00:1c.0
><7>PM: Adding info for pci:0000:00:1c.1
><7>PM: Adding info for pci:0000:00:1c.3
><7>PM: Adding info for pci:0000:00:1d.0
><7>PM: Adding info for pci:0000:00:1d.1
><7>PM: Adding info for pci:0000:00:1d.2
><7>PM: Adding info for pci:0000:00:1d.3
><7>PM: Adding info for pci:0000:00:1d.7
><7>PM: Adding info for pci:0000:00:1e.0
><7>PM: Adding info for pci:0000:00:1f.0
><7>PM: Adding info for pci:0000:00:1f.1
><7>PM: Adding info for pci:0000:00:1f.2
><7>PM: Adding info for pci:0000:01:00.0
><7>PM: Adding info for pci:0000:08:00.0
><7>PM: Adding info for pci:0000:10:00.0
><7>PM: Adding info for pci:0000:02:06.0
><7>PM: Adding info for pci:0000:02:06.1
><7>PM: Adding info for pci:0000:02:06.2
><7>PM: Adding info for pci:0000:02:06.3
><7>PM: Adding info for pci:0000:02:06.4
><4>ACPI: PCI Interrupt Link [C10F] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C110] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C111] (IRQs 10 *11)
><4>ACPI: PCI Interrupt Link [C112] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C12B] (IRQs *10 11)
><4>ACPI: PCI Interrupt Link [C12C] (IRQs 10 *11)
><4>ACPI: PCI Interrupt Link [C12D] (IRQs *10 11)
><4>ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
><6>ACPI: Power Resource [C1F3] (on)
><6>ACPI: Power Resource [C200] (on)
><6>ACPI: Power Resource [C21D] (on)
><6>ACPI: Power Resource [C225] (off)
><6>ACPI: Power Resource [C323] (off)
><6>ACPI: Power Resource [C324] (off)
><6>ACPI: Power Resource [C325] (off)
><6>ACPI: Power Resource [C326] (off)
><6>ACPI: Power Resource [C327] (off)
><6>ACPI: Power Resource [C328] (off)
><6>ACPI: Power Resource [C329] (off)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><7>PM: Adding info for No Bus:pnp0
><7>PM: Adding info for pnp:00:00
><7>PM: Adding info for pnp:00:01
><7>PM: Adding info for pnp:00:02
><7>PM: Adding info for pnp:00:03
><7>PM: Adding info for pnp:00:04
><7>PM: Adding info for pnp:00:05
><7>PM: Adding info for pnp:00:06
><7>PM: Adding info for pnp:00:07
><7>PM: Adding info for pnp:00:08
><7>PM: Adding info for pnp:00:09
><7>PM: Adding info for pnp:00:0a
><7>PM: Adding info for pnp:00:0b
><7>PM: Adding info for pnp:00:0c
><7>PM: Adding info for pnp:00:0d
><7>PM: Adding info for pnp:00:0e
><7>PM: Adding info for pnp:00:0f
><6>pnp: PnP ACPI: found 16 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><6>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
><6>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
><6>pnp: 00:00: iomem range 0x100000-0x7fffffff could not be reserved
><6>Time: tsc clocksource has been installed.
><6>pnp: 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
><6>pnp: 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
><6>pnp: 00:0e: ioport range 0x4d0-0x4d1 has been reserved
><6>pnp: 00:0e: ioport range 0x1000-0x107f has been reserved
><6>pnp: 00:0e: ioport range 0x1100-0x113f has been reserved
><6>pnp: 00:0e: ioport range 0x1200-0x121f has been reserved
><6>pnp: 00:0e: iomem range 0xf8000000-0xfbffffff has been reserved
><6>pnp: 00:0e: iomem range 0xfec00000-0xfec000ff has been reserved
><6>pnp: 00:0e: iomem range 0xfed20000-0xfed3ffff has been reserved
><6>pnp: 00:0e: iomem range 0xfed45000-0xfed8ffff has been reserved
><6>pnp: 00:0f: iomem range 0xcfe00-0xcffff has been reserved
><6>pnp: 00:0f: iomem range 0xd2800-0xd3fff has been reserved
><6>pnp: 00:0f: iomem range 0xfeda0000-0xfedbffff has been reserved
><6>pnp: 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
><7>PM: Adding info for No Bus:mem
><7>PM: Adding info for No Bus:null
><7>PM: Adding info for No Bus:port
><7>PM: Adding info for No Bus:zero
><7>PM: Adding info for No Bus:full
><7>PM: Adding info for No Bus:random
><7>PM: Adding info for No Bus:urandom
><7>PM: Adding info for No Bus:kmsg
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 4000-4fff
><6>  MEM window: f4600000-f46fffff
><6>  PREFETCH window: e0000000-efffffff
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: f4100000-f41fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.1
><6>  IO window: disabled.
><6>  MEM window: f4000000-f40fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: 2000-3fff
><6>  MEM window: f0000000-f3ffffff
><6>  PREFETCH window: disabled.
><4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
><4>  IO window: 00006000-000060ff
><4>  IO window: 00006400-000064ff
><4>  PREFETCH window: 88000000-8bffffff
><4>  MEM window: 8c000000-8fffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 6000-6fff
><6>  MEM window: f4200000-f45fffff
><6>  PREFETCH window: 88000000-8bffffff
><6>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 18
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
><4>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
><6>TCP: Hash tables configured (established 65536 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5574k freed
><7>PM: Adding info for No Bus:mcelog
><7>PM: Adding info for No Bus:msr0
><7>PM: Adding info for No Bus:msr1
><7>PM: Adding info for No Bus:cpu0
><7>PM: Adding info for No Bus:cpu1
><7>PM: Adding info for platform:pcspkr
><7>PM: Adding info for No Bus:snapshot
><6>audit: initializing netlink socket (disabled)
><5>audit(1174067419.932:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key 7C58071EBB7099D3
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:01.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:01.0:pcie00]
><7>PM: Adding info for pci_express:0000:00:01.0:pcie00
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>PM: Adding info for pci_express:0000:00:1c.0:pcie00
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PM: Adding info for pci_express:0000:00:1c.0:pcie02
><7>PCI: Setting latency timer of device 0000:00:1c.1 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.1:pcie00]
><7>PM: Adding info for pci_express:0000:00:1c.1:pcie00
><7>Allocate Port Service[0000:00:1c.1:pcie02]
><7>PM: Adding info for pci_express:0000:00:1c.1:pcie02
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>PM: Adding info for pci_express:0000:00:1c.3:pcie00
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><7>PM: Adding info for pci_express:0000:00:1c.3:pcie02
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><7>PM: Adding info for platform:vesafb.0
><4>ACPI: Transitioning device [C32A] to D3
><4>ACPI: Transitioning device [C32A] to D3
><6>ACPI: Fan [C32A] (off)
><4>ACPI: Transitioning device [C32B] to D3
><4>ACPI: Transitioning device [C32B] to D3
><6>ACPI: Fan [C32B] (off)
><4>ACPI: Transitioning device [C32C] to D3
><4>ACPI: Transitioning device [C32C] to D3
><6>ACPI: Fan [C32C] (off)
><4>ACPI: Transitioning device [C32D] to D3
><4>ACPI: Transitioning device [C32D] to D3
><6>ACPI: Fan [C32D] (off)
><4>ACPI: Transitioning device [C32E] to D3
><4>ACPI: Transitioning device [C32E] to D3
><6>ACPI: Fan [C32E] (off)
><4>ACPI: Transitioning device [C32F] to D3
><4>ACPI: Transitioning device [C32F] to D3
><6>ACPI: Fan [C32F] (off)
><4>ACPI: Transitioning device [C330] to D3
><4>ACPI: Transitioning device [C330] to D3
><6>ACPI: Fan [C330] (off)
><4>ACPI: SSDT 7FFF614C, 027F (r1 HP      Cpu0Ist     3000 INTL 20060317)
><4>ACPI: SSDT 7FFF6450, 04CB (r1 HP      Cpu0Cst     3001 INTL 20060317)
><7>Monitor-Mwait will be used to enter C-1 state
><7>Monitor-Mwait will be used to enter C-2 state
><6>ACPI: CPU0 (power states: C1[C1] C2[C2])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><4>ACPI: SSDT 7FFF6084, 00C8 (r1 HP      Cpu1Ist     3000 INTL 20060317)
><4>ACPI: SSDT 7FFF63CB, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
><6>ACPI: CPU1 (power states: C1[C1] C2[C2])
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>Time: hpet clocksource has been installed.
><6>ACPI: Thermal Zone [TZ0] (60 C)
><6>ACPI: Thermal Zone [TZ1] (50 C)
><6>ACPI: Thermal Zone [TZ2] (49 C)
><6>ACPI: Thermal Zone [TZ3] (31 C)
><6>ACPI: Thermal Zone [TZ4] (54 C)
><7>PM: Adding info for No Bus:tty
><7>PM: Adding info for No Bus:console
><7>PM: Adding info for No Bus:ptmx
><7>PM: Adding info for No Bus:tty0
><7>PM: Adding info for No Bus:vcs
><7>PM: Adding info for No Bus:vcsa
><7>PM: Adding info for No Bus:tty1
><7>PM: Adding info for No Bus:tty2
><7>PM: Adding info for No Bus:tty3
><7>PM: Adding info for No Bus:tty4
><7>PM: Adding info for No Bus:tty5
><7>PM: Adding info for No Bus:tty6
><7>PM: Adding info for No Bus:tty7
><7>PM: Adding info for No Bus:tty8
><7>PM: Adding info for No Bus:tty9
><7>PM: Adding info for No Bus:tty10
><7>PM: Adding info for No Bus:tty11
><7>PM: Adding info for No Bus:tty12
><7>PM: Adding info for No Bus:tty13
><7>PM: Adding info for No Bus:tty14
><7>PM: Adding info for No Bus:tty15
><7>PM: Adding info for No Bus:tty16
><7>PM: Adding info for No Bus:tty17
><7>PM: Adding info for No Bus:tty18
><7>PM: Adding info for No Bus:tty19
><7>PM: Adding info for No Bus:tty20
><7>PM: Adding info for No Bus:tty21
><7>PM: Adding info for No Bus:tty22
><7>PM: Adding info for No Bus:tty23
><7>PM: Adding info for No Bus:tty24
><7>PM: Adding info for No Bus:tty25
><7>PM: Adding info for No Bus:tty26
><7>PM: Adding info for No Bus:tty27
><7>PM: Adding info for No Bus:tty28
><7>PM: Adding info for No Bus:tty29
><7>PM: Adding info for No Bus:tty30
><7>PM: Adding info for No Bus:tty31
><7>PM: Adding info for No Bus:tty32
><7>PM: Adding info for No Bus:tty33
><7>PM: Adding info for No Bus:tty34
><7>PM: Adding info for No Bus:tty35
><7>PM: Adding info for No Bus:tty36
><7>PM: Adding info for No Bus:tty37
><7>PM: Adding info for No Bus:tty38
><7>PM: Adding info for No Bus:tty39
><7>PM: Adding info for No Bus:tty40
><7>PM: Adding info for No Bus:tty41
><7>PM: Adding info for No Bus:tty42
><7>PM: Adding info for No Bus:tty43
><7>PM: Adding info for No Bus:tty44
><7>PM: Adding info for No Bus:tty45
><7>PM: Adding info for No Bus:tty46
><7>PM: Adding info for No Bus:tty47
><7>PM: Adding info for No Bus:tty48
><7>PM: Adding info for No Bus:tty49
><7>PM: Adding info for No Bus:tty50
><7>PM: Adding info for No Bus:tty51
><7>PM: Adding info for No Bus:tty52
><7>PM: Adding info for No Bus:tty53
><7>PM: Adding info for No Bus:tty54
><7>PM: Adding info for No Bus:tty55
><7>PM: Adding info for No Bus:tty56
><7>PM: Adding info for No Bus:tty57
><7>PM: Adding info for No Bus:tty58
><7>PM: Adding info for No Bus:tty59
><7>PM: Adding info for No Bus:tty60
><7>PM: Adding info for No Bus:tty61
><7>PM: Adding info for No Bus:tty62
><7>PM: Adding info for No Bus:tty63
><7>PM: Adding info for No Bus:rtc
><6>Real Time Clock Driver v1.12ac
><7>PM: Adding info for No Bus:hpet
><7>hpet_resources: 0xfed00000 is busy
><7>PM: Adding info for No Bus:nvram
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>agpgart: Detected an Intel 945GM Chipset.
><7>PM: Adding info for No Bus:agpgart
><6>agpgart: AGP aperture is 256M @ 0x0
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><7>PM: Adding info for platform:serial8250
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><7>PM: Adding info for No Bus:ttyS0
><7>PM: Adding info for No Bus:ttyS1
><7>PM: Adding info for No Bus:ttyS2
><7>PM: Adding info for No Bus:ttyS3
><7>PM: Removing info for No Bus:ttyS0
><6>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><7>PM: Adding info for No Bus:ttyS0
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><7>PM: Adding info for No Bus:lo
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30a3]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:02:06.0, mfunc 0x01011b22, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
><6>Socket status: 30000006
><6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
><6>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
><6>pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
><6>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
><7>PM: Adding info for No Bus:pcmcia_socket0
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
><7>PM: Adding info for platform:i8042
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><7>PM: Adding info for serio:serio0
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><7>PM: Adding info for serio:serio1
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><7>PM: Adding info for serio:serio2
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><7>PM: Adding info for serio:serio3
><7>PM: Adding info for serio:serio4
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><6>Freeing unused kernel memory: 328k freed
><4>Write protecting the kernel read-only data: 1057k
><7>PM: Adding info for No Bus:vcs1
><7>PM: Adding info for No Bus:vcsa1
><3>synaptics reset failed
><3>synaptics reset failed
><3>synaptics reset failed
><7>PM: Adding info for No Bus:vcs4
><7>PM: Adding info for No Bus:vcsa4
><7>PM: Adding info for No Bus:vcs9
><7>PM: Adding info for No Bus:vcsa9
><7>PM: Removing info for No Bus:vcs9
><7>PM: Removing info for No Bus:vcsa9
><7>PM: Adding info for No Bus:vcs8
><7>PM: Adding info for No Bus:vcsa8
><7>PM: Removing info for No Bus:vcs8
><7>PM: Removing info for No Bus:vcsa8
><7>PM: Adding info for No Bus:vcs7
><7>PM: Adding info for No Bus:vcsa7
><7>PM: Removing info for No Bus:vcs7
><7>PM: Removing info for No Bus:vcsa7
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><7>PM: Removing info for No Bus:vcs3
><7>PM: Removing info for No Bus:vcsa3
><7>PM: Adding info for No Bus:vcs2
><7>PM: Adding info for No Bus:vcsa2
><7>PM: Removing info for No Bus:vcs2
><7>PM: Removing info for No Bus:vcsa2
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000
><6>serio: Synaptics pass-through port at isa0060/serio4/input0
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><7>PM: Adding info for serio:serio5
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4704000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><7>PM: Adding info for usb:usb1
><7>PM: Adding info for No Bus:usbdev1.1_ep00
><6>usb usb1: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:1-0:1.0
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><7>PM: Adding info for No Bus:usbdev1.1_ep81
><7>PM: Adding info for No Bus:usbdev1.1
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
><7>PM: Adding info for usb:usb2
><7>PM: Adding info for No Bus:usbdev2.1_ep00
><6>usb usb2: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:2-0:1.0
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev2.1_ep81
><7>PM: Adding info for No Bus:usbdev2.1
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 21, io base 0x00005020
><7>PM: Adding info for usb:usb3
><7>PM: Adding info for No Bus:usbdev3.1_ep00
><6>usb usb3: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:3-0:1.0
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev3.1_ep81
><7>PM: Adding info for No Bus:usbdev3.1
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
><7>PM: Adding info for usb:usb4
><7>PM: Adding info for No Bus:usbdev4.1_ep00
><6>usb usb4: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:4-0:1.0
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev4.1_ep81
><7>PM: Adding info for No Bus:usbdev4.1
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
><7>PM: Adding info for usb:usb5
><7>PM: Adding info for No Bus:usbdev5.1_ep00
><6>usb usb5: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:5-0:1.0
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><7>PM: Adding info for No Bus:usbdev5.1_ep81
><7>PM: Adding info for No Bus:usbdev5.1
><6>usb 1-8: new high speed USB device using ehci_hcd and address 4
><6>input: PS/2 Generic Mouse as /class/input/input4
><7>PM: Adding info for usb:1-8
><7>PM: Adding info for No Bus:usbdev1.4_ep00
><6>usb 1-8: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:1-8:1.0
><6>hub 1-8:1.0: USB hub found
><6>hub 1-8:1.0: 4 ports detected
><7>PM: Adding info for No Bus:usbdev1.4_ep81
><7>PM: Adding info for No Bus:usbdev1.4
><6>usb 2-1: new full speed USB device using uhci_hcd and address 2
><7>PM: Adding info for usb:2-1
><7>PM: Adding info for No Bus:usbdev2.2_ep00
><6>usb 2-1: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:2-1:1.0
><7>PM: Adding info for No Bus:usbdev2.2_ep81
><7>PM: Adding info for No Bus:usbdev2.2_ep82
><7>PM: Adding info for No Bus:usbdev2.2_ep02
><7>PM: Adding info for usb:2-1:1.1
><7>PM: Adding info for No Bus:usbdev2.2_ep83
><7>PM: Adding info for No Bus:usbdev2.2_ep03
><7>PM: Adding info for usb:2-1:1.2
><7>PM: Adding info for No Bus:usbdev2.2_ep84
><7>PM: Adding info for No Bus:usbdev2.2_ep04
><7>PM: Adding info for usb:2-1:1.3
><7>PM: Adding info for No Bus:usbdev2.2
><6>usb 3-1: new full speed USB device using uhci_hcd and address 2
><7>PM: Adding info for usb:3-1
><7>PM: Adding info for No Bus:usbdev3.2_ep00
><6>usb 3-1: configuration #1 chosen from 1 choice
><7>PM: Adding info for usb:3-1:1.0
><7>PM: Adding info for No Bus:usbdev3.2_ep81
><7>PM: Adding info for No Bus:usbdev3.2_ep02
><7>PM: Adding info for No Bus:usbdev3.2
><6>tg3.c:v3.74 (February 20, 2007)
><6>ACPI: PCI Interrupt 0000:08:00.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:08:00.0 to 64
><7>PM: Adding info for No Bus:eth0
><6>eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:17:08:43:8b:77
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
><6>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
><7>libata version 2.20 loaded.
><7>ata_piix 0000:00:1f.1: version 2.10ac1
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000015080 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000015088 irq 15
><6>scsi0 : ata_piix
><7>PM: Adding info for No Bus:host0
><6>ata1.00: ATAPI, max MWDMA2
><6>ata1.00: configured for MWDMA2
><6>scsi1 : ata_piix
><7>PM: Adding info for No Bus:host1
><7>ata2: port disabled. ignoring.
><3>ata2: reset failed, giving up
><7>PM: Adding info for No Bus:target0:0:0
><5>scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
><7>PM: Adding info for scsi:0:0:0:0
><4>sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:1f.2: version 2.1
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xffffc2000005e100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
><6>ata4: SATA max UDMA/133 cmd 0xffffc2000005e180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
><6>ata5: SATA max UDMA/133 cmd 0xffffc2000005e200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
><6>ata6: SATA max UDMA/133 cmd 0xffffc2000005e280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
><6>scsi2 : ahci
><7>PM: Adding info for No Bus:host2
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATA-7: HTS721010G9SA00, MCZOC12V, max UDMA/100
><6>ata3.00: 195371568 sectors, multi 16: LBA48 
><6>ata3.00: configured for UDMA/100
><6>scsi3 : ahci
><7>PM: Adding info for No Bus:host3
><6>ata4: SATA link down (SStatus 0 SControl 0)
><6>scsi4 : ahci
><7>PM: Adding info for No Bus:host4
><6>ata5: SATA link down (SStatus 0 SControl 0)
><6>scsi5 : ahci
><7>PM: Adding info for No Bus:host5
><6>ata6: SATA link down (SStatus 0 SControl 0)
><7>PM: Adding info for No Bus:target2:0:0
><5>scsi 2:0:0:0: Direct-Access     ATA      HTS721010G9SA00  MCZO PQ: 0 ANSI: 5
><7>PM: Adding info for scsi:2:0:0:0
><5>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2
><5>sd 2:0:0:0: Attached scsi disk sda
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>PM: Writing back config space on device 0000:08:00.0 at offset 1 (was 100406, writing 100006)
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>tg3: eth0: Link is up at 1000 Mbps, full duplex.
><6>tg3: eth0: Flow control is on for TX and on for RX.
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>eth0: no IPv6 routers present
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>security:  3 users, 6 roles, 1816 types, 217 bools, 1 sens, 1024 cats
><7>security:  60 classes, 63042 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1174067566.208:2): policy loaded auid=4294967295
><7>PM: Adding info for No Bus:vcs2
><7>PM: Adding info for No Bus:vcsa2
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  8264.000 MB/sec
><4>raid5: using function: generic_sse (8264.000 MB/sec)
><4>raid6: int64x1   1976 MB/s
><4>raid6: int64x2   2449 MB/s
><4>raid6: int64x4   1843 MB/s
><4>raid6: int64x8   1792 MB/s
><4>raid6: sse2x1    3648 MB/s
><4>raid6: sse2x2    3984 MB/s
><4>raid6: sse2x4    6933 MB/s
><4>raid6: using algorithm sse2x4 (6933 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><4>GFS2 (built Mar 15 2007 18:51:58) installed
><6>Lock_Nolock (built Mar 15 2007 18:52:06) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><7>PM: Adding info for No Bus:device-mapper
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><7>PM: Removing info for No Bus:vcs3
><7>PM: Removing info for No Bus:vcsa3
><7>PM: Adding info for No Bus:vcs3
><7>PM: Adding info for No Bus:vcsa3
><5>audit(1174067585.822:3): audit_pid=839 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda1, type ext3), uses xattr
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><6>Adding 2097144k swap on /dev/VolGroup00/LogVolSwap.  Priority:-1 extents:1 across:2097144k
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>PM: Adding info for No Bus:vcs6
><7>PM: Adding info for No Bus:vcsa6
><7>PM: Removing info for No Bus:vcs6
><7>PM: Removing info for No Bus:vcsa6
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda1, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda1, type ext3), uses xattr
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5
><7>PM: Removing info for No Bus:vcs5
><7>PM: Removing info for No Bus:vcsa5
><7>security:  3 users, 6 roles, 1816 types, 217 bools, 1 sens, 1024 cats
><7>security:  60 classes, 63042 rules
><7>PM: Adding info for No Bus:vcs5
><7>PM: Adding info for No Bus:vcsa5

Actions: View

Attachments on bug 231006: 149503 | 149504 | 149505 | 149635 | 149638 | 150280 | 150281