Attachment 150293 Details for Bug 232743 – kernel-2.6.19-1.2911.6.5.fc6 boot log

kernel-2.6.19-1.2911.6.5.fc6 boot log

dmesg.txt (text/plain), 18.52 KB, created by Sam Varshavchik on 2007-03-17 00:41:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Sam Varshavchik

Created: 2007-03-17 00:41:35 UTC

Size: 18.52 KB

patch

obsolete

>Linux version 2.6.19-1.2911.6.5.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sun Mar 4 16:05:34 EST 2007
>Command line: ro root=/dev/md1 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
> BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff70000 (usable)
> BIOS-e820: 000000007ff70000 - 000000007ff76000 (ACPI data)
> BIOS-e820: 000000007ff76000 - 000000007ff80000 (ACPI NVS)
> BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524144) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP (v002 PTLTD                                 ) @ 0x00000000000f6920
>ACPI: XSDT (v001 PTLTD  	 XSDT   0x06040000  LTP 0x00000000) @ 0x000000007ff734d8
>ACPI: FADT (v003 AMD    HAMMER   0x06040000 PTEC 0x000f4240) @ 0x000000007ff75e46
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x000000007ff75f3a
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x000000007ff75fb0
>ACPI: DSDT (v001 AMD-K8  AMDACPI 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>Scanning NUMA topology in Northbridge 24
>Number of nodes 2
>Node 0 using interleaving mode 1/0
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ff70000
>Entering add_active_range(0, 0, 155) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524144) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ff70000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      155
>    0:      256 ->   524144
>On node 0 totalpages: 524043
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1448 pages reserved
>  DMA zone: 2483 pages, LIFO batch:0
>  DMA32 zone: 8125 pages used for memmap
>  DMA32 zone: 511923 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfe500000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfe500000, GSI 24-27
>ACPI: IOAPIC (id[0x04] address[0xfe501000] gsi_base[28])
>IOAPIC[2]: apic_id 4, address 0xfe501000, GSI 28-31
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009b000 - 000000000009c000
>Nosave address range: 000000000009c000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000d6000
>Nosave address range: 00000000000d6000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514406
>Kernel command line: ro root=/dev/md1 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 0 size 32 MB
>No AGP bridge found
>Memory: 2052372k/2096576k available (2469k kernel code, 43800k reserved, 1938k data, 312k init)
>Calibrating delay using timer specific routine.. 2808.33 BogoMIPS (lpj=1404165)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12528653
>Detected 12.528 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 2805.99 BogoMIPS (lpj=1402996)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>AMD Opteron(tm) Processor 240 stepping 01
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 24 cycles, maxerr 800 cycles)
>Brought up 2 CPUs
>Disabling vsyscall due to use of PM timer
>time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
>time.c: Detected 1403.208 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=240 bytes
>sizeof(task_struct)=1904 bytes
>migration_cost=882
>checking if image is initramfs... it is
>Freeing initrd memory: 1667k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:06.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.TP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.G0PB._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-DMA: Disabling IOMMU.
>pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:05: ioport range 0x1100-0x117f has been reserved
>pnp: 00:05: ioport range 0x1180-0x11ff has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: 2000-2fff
>  MEM window: fd000000-fe0fffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: fe100000-fe1fffff
>  PREFETCH window: 88100000-881fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: 3000-3fff
>  MEM window: fe200000-fe2fffff
>  PREFETCH window: 88200000-882fffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1174076880.629:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key BA345A59F0682455
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0a.0 subordinate bus.
>PCI: MSI quirk detected. PCI_BUS_FLAGS_NO_MSI set for 0000:00:0b.0 subordinate bus.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>AMD8111: IDE controller at PCI slot 0000:00:07.1
>AMD8111: chipset revision 3
>AMD8111: not 100% native mode: will probe irqs later
>AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
>    ide0: BM-DMA at 0x1020-0x1027, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1028-0x102f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: SAMSUNG SP1213N, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: LITE-ON DVDRW LDW-811S, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Power state transitions not supported
>powernow-k8: Power state transitions not supported
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 312k freed
>Write protecting the kernel read-only data: 494k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:01:00.0[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.0: OHCI Host Controller
>ohci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:01:00.0: irq 19, io mem 0xfe000000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:01:00.1[D] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:01:00.1: OHCI Host Controller
>ohci_hcd 0000:01:00.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:01:00.1: irq 19, io mem 0xfe001000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: generic_sse
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>   generic_sse:  4516.000 MB/sec
>raid5: using function: generic_sse (4516.000 MB/sec)
>raid6: int64x1   1164 MB/s
>raid6: int64x2   1390 MB/s
>raid6: int64x4   1160 MB/s
>raid6: int64x8   1269 MB/s
>raid6: sse2x1    1703 MB/s
>raid6: sse2x2    2324 MB/s
>raid6: sse2x4    2605 MB/s
>raid6: using algorithm sse2x4 (2605 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 29 (level, low) -> IRQ 29
>usb 1-2: configuration #1 chosen from 1 choice
>usb 1-3: new low speed USB device using ohci_hcd and address 3
>usb 1-3: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:01:00.0-3
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
>        <Adaptec 29320 Ultra320 SCSI adapter>
>        aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
>
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 30 (level, low) -> IRQ 30
>scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
>        <Adaptec 29320 Ultra320 SCSI adapter>
>        aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
>
>scsi 1:0:0:0: Direct-Access     SEAGATE  ST336607LW       0007 PQ: 0 ANSI: 3
> target1:0:0: asynchronous
>scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
> target1:0:0: Beginning Domain Validation
> target1:0:0: wide asynchronous
> target1:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
> target1:0:0: Ending Domain Validation
>SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
>sda: Write Protect is off
>sda: Mode Sense: ab 00 10 08
>SCSI device sda: drive cache: write back w/ FUA
>SCSI device sda: 71687372 512-byte hdwr sectors (36704 MB)
>sda: Write Protect is off
>sda: Mode Sense: ab 00 10 08
>SCSI device sda: drive cache: write back w/ FUA
> sda: sda1 sda2 sda3
>sd 1:0:0:0: Attached scsi disk sda
>scsi 1:0:1:0: Direct-Access     SEAGATE  ST336607LW       0007 PQ: 0 ANSI: 3
> target1:0:1: asynchronous
>scsi1:A:1:0: Tagged Queuing enabled.  Depth 4
> target1:0:1: Beginning Domain Validation
> target1:0:1: wide asynchronous
> target1:0:1: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63)
> target1:0:1: Ending Domain Validation
>SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: ab 00 10 08
>SCSI device sdb: drive cache: write back w/ FUA
>SCSI device sdb: 71687372 512-byte hdwr sectors (36704 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: ab 00 10 08
>SCSI device sdb: drive cache: write back w/ FUA
> sdb: sdb1 sdb2 sdb3
>sd 1:0:1:0: Attached scsi disk sdb
>shpchp: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0
>shpchp: shpc_init: cannot reserve MMIO region
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb3 ...
>md:  adding sdb3 ...
>md: sdb2 has different UUID to sdb3
>md: sdb1 has different UUID to sdb3
>md:  adding sda3 ...
>md: sda2 has different UUID to sdb3
>md: sda1 has different UUID to sdb3
>md: created md2
>md: bind<sda3>
>md: bind<sdb3>
>md: running: <sdb3><sda3>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda2 ...
>md: sda1 has different UUID to sdb2
>md: created md1
>md: bind<sda2>
>md: bind<sdb2>
>md: running: <sdb2><sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1D17
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>tg3.c:v3.69 (November 15, 2006)
>ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 27 (level, low) -> IRQ 27
>eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:50:45:5b:b2:f6
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 27 (level, low) -> IRQ 27
>eth1: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:66MHz:32-bit) 10/100/1000BaseT Ethernet 00:50:45:5b:b2:f7
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth1: dma_rwctrl[763f0000] dma_mask[64-bit]
>EDAC MC: Ver: 2.0.1 Mar  4 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>gameport: EMU10K1 is pci0000:01:04.1/gameport0, io 0x2420, speed 695kHz
>input: PC Speaker as /class/input/input2
>AMD768 RNG detected
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:1:0: Attached scsi generic sg1 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (FF) [SLPF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>EXT3 FS on md1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052152k swap on /dev/md2.  Priority:-1 extents:1 across:1052152k
>PM: Writing back config space on device 0000:02:04.0 at offset b (was 164714e4, writing 800914e4)
>PM: Writing back config space on device 0000:02:04.0 at offset 3 (was 0, writing 4010)
>PM: Writing back config space on device 0000:02:04.0 at offset 2 (was 2000000, writing 2000002)
>PM: Writing back config space on device 0000:02:04.0 at offset 1 (was 2b00000, writing 2b00006)
>PM: Writing back config space on device 0000:02:04.0 at offset 0 (was 164714e4, writing 16a614e4)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 232743: 150292 | 150293