Attachment 150310 Details for Bug 232776 – output from lspci -vv

output from lspci -vv

lspcioutput.txt (text/plain), 12.64 KB, created by Dave Russell on 2007-03-17 15:06:04 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dave Russell

Created: 2007-03-17 15:06:04 UTC

Size: 12.64 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
>	Subsystem: ASRock Incorporation Unknown device 2770
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
>	Subsystem: ASRock Incorporation Unknown device 2772
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fea00000 (32-bit, non-prefetchable) [size=512K]
>	Region 1: I/O ports at dc00 [size=8]
>	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Region 3: Memory at fe9c0000 (32-bit, non-prefetchable) [size=256K]
>	Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>		Address: 00000000  Data: 0000
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:02.1 Display controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
>	Subsystem: ASRock Incorporation Unknown device 2772
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at fea80000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [d0] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Prefetchable memory behind bridge: 00000000fdf00000-00000000fdf00000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41b9
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	Prefetchable memory behind bridge: 00000000fde00000-00000000fde00000
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s unlimited, L1 unlimited
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
>		Link: Latency L0s <1us, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x0
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Unknown, PwrInd Unknown, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>		Address: fee0300c  Data: 41c1
>	Capabilities: [90] #0d [0000]
>	Capabilities: [a0] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: ASRock Incorporation Unknown device 27c8
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 4: I/O ports at d400 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: ASRock Incorporation Unknown device 27c9
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 20
>	Region 4: I/O ports at d480 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: ASRock Incorporation Unknown device 27ca
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 18
>	Region 4: I/O ports at d800 [size=32]
>
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: ASRock Incorporation Unknown device 27cb
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 16
>	Region 4: I/O ports at d880 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: ASRock Incorporation Unknown device 27cc
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at fe9bbc00 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: feb00000-febfffff
>	Prefetchable memory behind bridge: 0000000080000000-0000000080000000
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [50] #0d [0000]
>
>00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
>	Subsystem: ASRock Incorporation Unknown device 27b8
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: ASRock Incorporation Unknown device 27df
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at ffa0 [size=16]
>
>00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: ASRock Incorporation Unknown device 27c0
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 20
>	Region 0: I/O ports at d080 [size=8]
>	Region 1: I/O ports at d000 [size=4]
>	Region 2: I/O ports at cc00 [size=8]
>	Region 3: I/O ports at c880 [size=4]
>	Region 4: I/O ports at c800 [size=16]
>	Capabilities: [70] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>	Subsystem: ASRock Incorporation Unknown device 27da
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 20
>	Region 4: I/O ports at 0400 [size=32]
>
>03:01.0 Ethernet controller: Intel Corporation 82544GC Gigabit Ethernet Controller (Copper) (rev 02)
>	Subsystem: Intel Corporation PRO/1000 T Desktop Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (63750ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
>	Region 2: I/O ports at e800 [size=32]
>	Expansion ROM at 80000000 [disabled] [size=128K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>	Capabilities: [e4] PCI-X non-bridge device
>		Command: DPERE- ERO+ RBC=512 OST=1
>		Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
>	Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>
>03:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 08)
>	Subsystem: Creative Labs CT4760 SBLive!
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (500ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 19
>	Region 0: I/O ports at e880 [size=32]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>03:02.1 Input device controller: Creative Labs SB Live! Game Port (rev 08)
>	Subsystem: Creative Labs Gameport Joystick
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Region 0: I/O ports at ec00 [size=8]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 232776: 150309 | 150310