Attachment 150372 Details for Bug 232912 – scsrun.log and scsconfig.log output from system-config-soundcard

scsrun.log and scsconfig.log output from system-config-soundcard

scs.txt (text/plain), 35.87 KB, created by Russ Price on 2007-03-19 14:15:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Russ Price

Created: 2007-03-19 14:15:07 UTC

Size: 35.87 KB

patch

obsolete

>
>------- System Config Soundcard Log --------
>Mon Mar 19 08:45:33 CDT 2007
>
>ALSA lib pcm_hw.c:1357:(_snd_pcm_hw_open) Invalid value for card
>aplay: main:550: audio open error: No such device
>amixer: Mixer attach default error: No such device
>amixer: Mixer attach default error: No such device
>
>
>------- System Config Soundcard Log --------
>Mon Mar 19 08:45:41 CDT 2007
>
>------- lspci --------
>00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
>00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
>00:11.0 IDE interface: ATI Technologies Inc ATI 437A Serial ATA Controller (rev 80)
>00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA Controller (rev 80)
>00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
>00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
>00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
>00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
>00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (rev 80)
>00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
>00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
>00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80)
>01:00.0 VGA compatible controller: nVidia Corporation Unknown device 016a (rev a1)
>02:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
>02:04.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
>
>------- lspci -vn --------
>00:00.0 0600: 1002:5a33 (rev 01)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64
>	Memory at <ignored> (64-bit, non-prefetchable)
>
>00:02.0 0604: 1002:5a34
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000e000-0000efff
>	Memory behind bridge: fa000000-fcffffff
>	Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000
>	Capabilities: [50] Power Management version 3
>	Capabilities: [58] Express Root Port (Slot-) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable+
>	Capabilities: [b0] #0d [0000]
>	Capabilities: [b8] HyperTransport: MSI Mapping
>	Capabilities: [100] Advanced Error Reporting
>	Capabilities: [140] Virtual Channel
>
>00:11.0 0101: 1002:437a (rev 80) (prog-if 8f)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 23
>	I/O ports at ff00 [size=8]
>	I/O ports at fe00 [size=4]
>	I/O ports at fd00 [size=8]
>	I/O ports at fc00 [size=4]
>	I/O ports at fb00 [size=16]
>	Memory at fe02f000 (32-bit, non-prefetchable) [size=512]
>	[virtual] Expansion ROM at 20000000 [disabled] [size=512K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:12.0 0101: 1002:4379 (rev 80) (prog-if 8f)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
>	I/O ports at fa00 [size=8]
>	I/O ports at f900 [size=4]
>	I/O ports at f800 [size=8]
>	I/O ports at f700 [size=4]
>	I/O ports at f600 [size=16]
>	Memory at fe02e000 (32-bit, non-prefetchable) [size=512]
>	[virtual] Expansion ROM at 20080000 [disabled] [size=512K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [50] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:13.0 0c03: 1002:4374 (rev 80) (prog-if 10)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
>	Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:13.1 0c03: 1002:4375 (rev 80) (prog-if 10)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
>	Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:13.2 0c03: 1002:4373 (rev 80) (prog-if 20)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
>	Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [dc] Power Management version 2
>	Capabilities: [d0] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:14.0 0c05: 1002:4372 (rev 82)
>	Subsystem: 8086:d600
>	Flags: 66MHz, medium devsel
>	I/O ports at 0b00 [size=16]
>	Memory at fe02a000 (32-bit, non-prefetchable) [size=1K]
>
>00:14.1 0101: 1002:4376 (rev 80) (prog-if 8a)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at f400 [size=16]
>	Capabilities: [70] Message Signalled Interrupts: 64bit- Queue=0/0 Enable-
>
>00:14.2 0403: 1002:437b (rev 01)
>	Subsystem: 8086:d600
>	Flags: slow devsel, IRQ 16
>	Memory at fe024000 (64-bit, non-prefetchable) [size=16K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>
>00:14.3 0601: 1002:4377 (rev 80)
>	Subsystem: 8086:d600
>	Flags: bus master, 66MHz, medium devsel, latency 0
>
>00:14.4 0604: 1002:4371 (rev 80) (prog-if 01)
>	Flags: bus master, VGA palette snoop, 66MHz, medium devsel, latency 64
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fdd00000-fddfffff
>	Prefetchable memory behind bridge: fde00000-fdefffff
>
>01:00.0 0300: 10de:016a (rev a1)
>	Flags: bus master, fast devsel, latency 0, IRQ 18
>	Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
>	Memory at d0000000 (64-bit, prefetchable) [size=256M]
>	Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
>	[virtual] Expansion ROM at fc000000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>	Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>	Capabilities: [78] Express Endpoint IRQ 0
>	Capabilities: [100] Virtual Channel
>	Capabilities: [128] Power Budgeting
>
>02:02.0 0200: 10ec:8139 (rev 10)
>	Subsystem: 8086:d600
>	Flags: bus master, medium devsel, latency 64, IRQ 21
>	I/O ports at de00 [size=256]
>	Memory at fddff000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>
>02:04.0 0780: e159:0001
>	Subsystem: 8086:0003
>	Flags: bus master, medium devsel, latency 64, IRQ 255
>	I/O ports at dc00 [size=256]
>	Memory at fddfe000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>
>------- lsmod --------
>Module                  Size  Used by
>snd_hda_intel          30689  0 
>snd_hda_codec         204353  1 snd_hda_intel
>snd_seq_dummy          12613  0 
>snd_seq_oss            41153  0 
>snd_seq_midi_event     16705  1 snd_seq_oss
>snd_seq                64225  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_seq_device         17109  3 snd_seq_dummy,snd_seq_oss,snd_seq
>snd_pcm_oss            53345  0 
>snd_mixer_oss          25537  1 snd_pcm_oss
>snd_pcm                93641  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
>snd_timer              32969  2 snd_seq,snd_pcm
>snd                    72553  9 snd_hda_intel,snd_hda_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
>soundcore              17505  1 snd
>snd_page_alloc         18897  2 snd_hda_intel,snd_pcm
>autofs4                32457  2 
>hidp                   35265  2 
>nfs                   257177  1 
>lockd                  75633  2 nfs
>nfs_acl                12225  1 nfs
>rfcomm                 57577  0 
>l2cap                  41281  10 hidp,rfcomm
>bluetooth              74053  5 hidp,rfcomm,l2cap
>sunrpc                181513  4 nfs,lockd,nfs_acl
>ipv6                  339233  28 
>dm_multipath           28241  0 
>video                  26697  0 
>sbs                    25361  0 
>i2c_ec                 14017  1 sbs
>dock                   19809  0 
>button                 17249  0 
>battery                19273  0 
>asus_acpi              27117  0 
>backlight              15681  1 asus_acpi
>ac                     14281  0 
>lp                     23185  0 
>sg                     45545  0 
>shpchp                 42845  0 
>serio_raw              16197  0 
>nvidia               7759448  16 
>8139too                37313  0 
>8139cp                 34113  0 
>pcspkr                 11969  0 
>mii                    14401  2 8139too,8139cp
>parport_pc             38377  1 
>parport                49485  2 lp,parport_pc
>i2c_core               32833  2 i2c_ec,nvidia
>ide_cd                 49505  0 
>cdrom                  44265  1 ide_cd
>dm_snapshot            25777  0 
>dm_zero                10817  0 
>dm_mirror              31105  0 
>dm_mod                 70737  15 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>sata_sil               22089  2 
>libata                120553  1 sata_sil
>sd_mod                 30273  3 
>scsi_mod              165529  3 sg,libata,sd_mod
>ext3                  142545  5 
>jbd                    74033  1 ext3
>ehci_hcd               41937  0 
>ohci_hcd               30681  0 
>uhci_hcd               34273  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 8139too
>alias scsi_hostadapter sata_sil
>alias snd-card-0 snd-hda-intel
>options snd-card-0 index=0
>options snd-hda-intel index=0
>remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-hda-intel
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard, do not edit by hand
>#SWCONF
>#DEV 0
>defaults.pcm.card 0 
>defaults.pcm.device 0 
>defaults.ctl.card 0 
>
>------- aplay -l --------
>aplay: device_list:222: no soundcards found...
>
>------- amixer --------
>
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.13-1.fc6
>alsa-lib-1.0.13-1.fc6
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.13-1.fc6
>
>------- /proc/asound/modules --------
>
>
>------- /proc/asound/pcm --------
>
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc IXP SB400 PCI-PCI Bridge"
>vendorId: 1002
>deviceId: 4371
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  4
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc IXP SB400 PCI-ISA Bridge"
>vendorId: 1002
>deviceId: 4377
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc IXP SB400 SMBus Controller"
>vendorId: 1002
>deviceId: 4372
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: shpchp
>desc: "ATI Technologies Inc RS480 PCI-X Root Port"
>vendorId: 1002
>deviceId: 5a34
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc Radeon Xpress 200 Host Bridge"
>vendorId: 1002
>deviceId: 5a33
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2925.fc6 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2925.fc6 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2925.fc6 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2925.fc6 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.2925.fc6 ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.2925.fc6 ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Logitech Logitech USB Keyboard"
>usbclass: 3
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 1
>usbport: 2
>usbdev: 3
>vendorId: 046d
>deviceId: c308
>usbmfr: Logitech
>usbprod: Logitech USB Keyboard
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0401"
>deviceId: PNP0401
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (CM)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: 8139too
>desc: "Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+"
>network.hwaddr: 00:16:76:46:c6:cf
>vendorId: 10ec
>deviceId: 8139
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  2
>pcifn:  0
>-
>class: MOUSE
>bus: USB
>detached: 0
>device: input/mice
>driver: genericwheelusb
>desc: "Logitech Trackball"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 2
>usblevel: 1
>usbport: 2
>usbdev: 2
>vendorId: 046d
>deviceId: c404
>usbmfr: Logitech
>usbprod: Trackball
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-hda-intel
>desc: "ATI Technologies Inc SB450 HDA Audio"
>vendorId: 1002
>deviceId: 437b
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  2
>-
>class: CDROM
>bus: IDE
>detached: 0
>device: hda
>desc: "Optiarc DVD RW AD-7170A"
>-
>class: MODEM
>bus: PCI
>detached: 0
>driver: hisax
>desc: "Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface"
>vendorId: e159
>deviceId: 0001
>subVendorId: 8086
>subDeviceId: 0003
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  4
>pcifn:  0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: nvidia
>desc: "nVidia Corporation Unknown device 016a"
>vendorId: 10de
>deviceId: 016a
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA SAMSUNG SP2504C"
>host: 2
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: USB
>detached: 0
>driver: keybdev
>desc: "Logitech Logitech USB Keyboard"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 1
>usblevel: 1
>usbport: 2
>usbdev: 3
>vendorId: 046d
>deviceId: c308
>usbmfr: Logitech
>usbprod: Logitech USB Keyboard
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB2 Host Controller"
>vendorId: 1002
>deviceId: 4373
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB Host Controller"
>vendorId: 1002
>deviceId: 4375
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "ATI Technologies Inc IXP SB400 USB Host Controller"
>vendorId: 1002
>deviceId: 4374
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 13
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI"
>vendorId: 1002
>deviceId: 4376
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 14
>pcifn:  1
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: sata_sil
>desc: "ATI Technologies Inc ATI 4379 Serial ATA Controller"
>vendorId: 1002
>deviceId: 4379
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 12
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: sata_sil
>desc: "ATI Technologies Inc ATI 437A Serial ATA Controller"
>vendorId: 1002
>deviceId: 437a
>subVendorId: 8086
>subDeviceId: d600
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 11
>pcifn:  0
>
>------- dmesg --------
>Linux version 2.6.20-1.2925.fc6 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Mar 10 18:38:39 EST 2007
>Command line: ro root=/dev/VolGroup00/RootVol rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> BIOS-e820: 000000001fef0000 - 000000001fef3000 (ACPI NVS)
> BIOS-e820: 000000001fef3000 - 000000001ff00000 (ACPI data)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 130800) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP (v000 ATi                                   ) @ 0x00000000000f7ed0
>ACPI: RSDT (v001 ATi    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fef3040
>ACPI: FADT (v001 ATi    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fef30c0
>ACPI: MCFG (v001 ATi    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fef6a80
>ACPI: MADT (v001 ATi    AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fef6980
>ACPI: DSDT (v001 ATI    AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000001fef0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 130800) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000001fef0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   130800
>On node 0 totalpages: 130703
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1320 pages reserved
>  DMA zone: 2615 pages, LIFO batch:0
>  DMA32 zone: 1979 pages used for memmap
>  DMA32 zone: 124725 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 20000000 (gap: 1ff00000:c0100000)
>SMP: Allowing 4 CPUs, 3 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 127340
>Kernel command line: ro root=/dev/VolGroup00/RootVol rhgb quiet
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 505936k/523200k available (2448k kernel code, 16876k reserved, 1456k data, 316k init)
>Calibrating delay using timer specific routine.. 5604.62 BogoMIPS (lpj=2802310)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Hyper-Threading is disabled
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 8333926
>Detected 8.333 MHz APIC timer.
>Brought up 1 CPUs
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 2800.192 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11), disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 3 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x228-0x22f has been reserved
>pnp: 00:01: ioport range 0x40b-0x40b has been reserved
>pnp: 00:01: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:01: ioport range 0xc00-0xc01 has been reserved
>pnp: 00:01: ioport range 0xc14-0xc14 has been reserved
>pnp: 00:01: ioport range 0xc50-0xc52 has been reserved
>pnp: 00:01: ioport range 0xc6c-0xc6d has been reserved
>pnp: 00:01: ioport range 0xc6f-0xc6f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: e000-efff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: d000-dfff
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fde00000-fdefffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
>TCP established hash table entries: 16384 (order: 7, 524288 bytes)
>TCP bind hash table entries: 8192 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2324k freed
>audit: initializing netlink socket (disabled)
>audit(1174311642.403:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 7B88EE5B4ADA4319
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie03]
>aer_init: AER service init fails - No ACPI _OSC support
>aer: probe of 0000:00:02.0:pcie01 failed with error 1
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xf408-0xf40f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: Optiarc DVD RW AD-7170A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1042k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 19, io mem 0xfe02d000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 19, io mem 0xfe02c000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe02b000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:11.0: version 2.0
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 23
>ata1: SATA max UDMA/100 cmd 0xFFFFC2000001A080 ctl 0xFFFFC2000001A08A bmdma 0xFFFFC2000001A000 irq 23
>ata2: SATA max UDMA/100 cmd 0xFFFFC2000001A0C0 ctl 0xFFFFC2000001A0CA bmdma 0xFFFFC2000001A008 irq 23
>scsi0 : sata_sil
>ata1: SATA link down (SStatus 0 SControl 310)
>scsi1 : sata_sil
>usb 1-3: new low speed USB device using ohci_hcd and address 3
>ata2: SATA link down (SStatus 0 SControl 310)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
>ata3: SATA max UDMA/100 cmd 0xFFFFC2000001C080 ctl 0xFFFFC2000001C08A bmdma 0xFFFFC2000001C000 irq 22
>ata4: SATA max UDMA/100 cmd 0xFFFFC2000001C0C0 ctl 0xFFFFC2000001C0CA bmdma 0xFFFFC2000001C008 irq 22
>scsi2 : sata_sil
>usb 1-3: configuration #1 chosen from 1 choice
>input: Logitech Logitech USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-3
>input: Logitech Logitech USB Keyboard as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:13.0-3
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata3.00: ATA-7, max UDMA7, 488397168 sectors: LBA48 NCQ (depth 0/32)
>ata3.00: ata3: dev 0 multi count 1
>ata3.00: configured for UDMA/100
>scsi3 : sata_sil
>usb 2-3: configuration #1 chosen from 1 choice
>input: Logitech Trackball as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:13.1-3
>ata4: SATA link down (SStatus 0 SControl 310)
>scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG SP2504C  VT10 PQ: 0 ANSI: 5
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1604 types, 175 bools, 1 sens, 1024 cats
>security:  59 classes, 50467 rules
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1174311651.576:2): policy loaded auid=4294967295
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>input: PC Speaker as /class/input/input4
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:02:02.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 21
>eth0: RealTek RTL8139 at 0xffffc2000001e000, 00:16:76:46:c6:cf, IRQ 21
>eth0:  Identified 8139 chip type 'RTL-8101'
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  1.0-9746  Fri Dec 15 10:19:35 PST 2006
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>hda-intel: no codecs initialized
>ACPI: PCI interrupt for device 0000:00:14.2 disabled
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 0 at 1:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 1 at 1:00.0] forgot to specify physical device; fix it!
>**WARNING** I2C adapter driver [NVIDIA i2c adapter 2 at 1:00.0] forgot to specify physical device; fix it!
>Adding 2097144k swap on /dev/VolGroup00/SwapVol.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>SELinux: initialized (dev 0:16, type nfs), uses genfs_contexts
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>hda-intel: no codecs initialized
>ACPI: PCI interrupt for device 0000:00:14.2 disabled
>

Actions: View

Attachments on bug 232912: 150372