Attachment 150426 Details for Bug 232991 – dmesg output

dmesg output

dmesg (text/plain), 31.02 KB, created by Robert M Williams on 2007-03-19 19:57:44 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Robert M Williams

Created: 2007-03-19 19:57:44 UTC

Size: 31.02 KB

patch

obsolete

>Linux version 2.6.20-1.2997.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070312 (Red Hat 4.1.2-4)) #1 SMP Fri Mar 16 22:29:02 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 0000000037d90000 end: 0000000037e90000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000037e90000 size: 000000000000a000 end: 0000000037e9a000 type: 3
>copy_e820_map() start: 0000000037e9a000 size: 0000000000066000 end: 0000000037f00000 type: 4
>copy_e820_map() start: 0000000037f00000 size: 0000000008100000 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000037e90000 (usable)
> BIOS-e820: 0000000037e90000 - 0000000037e9a000 (ACPI data)
> BIOS-e820: 0000000037e9a000 - 0000000037f00000 (ACPI NVS)
> BIOS-e820: 0000000037f00000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>894MB LOWMEM available.
>found SMP MP-table at 000f8110
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 229008) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229008
>  HighMem    229008 ->   229008
>early_node_map[1] active PFN ranges
>    0:        0 ->   229008
>On node 0 totalpages: 229008
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2855 pages used for memmap
>  Normal zone: 222057 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F8040, 0014 (r0 ACRSYS)
>ACPI: RSDT 37E91ACB, 0038 (r1 ACRSYS ACRPRDCT  6040000  LTP        0)
>ACPI: FACP 37E99C04, 0074 (r1 ATI    Bowfin    6040000 ATI     F4240)
>ACPI: DSDT 37E91B03, 8101 (r1   Acer  Navarro  6040000 MSFT  3000000)
>ACPI: FACS 37E9AFC0, 0040
>ACPI: SLIC 37E99C78, 0176 (r1 ACRSYS ACRPRDCT  6040000 LOHR        0)
>ACPI: APIC 37E99DEE, 0054 (r1 PTLTD  	 APIC    6040000  LTP        0)
>ACPI: MCFG 37E99E42, 003C (r1 PTLTD    MCFG    6040000  LTP        0)
>ACPI: SSDT 37E99E7E, 0182 (r1 PTLTD  POWERNOW  6040000  LTP        1)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Built 1 zonelists.  Total pages: 226101
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079e000 soft=c077e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1596.128 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 893604k/916032k available (2146k kernel code, 21864k reserved, 1140k data, 248k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf7e90000   ( 894 MB)
>      .init : 0xc073b000 - 0xc0779000   ( 248 kB)
>      .data : 0xc0618b21 - 0xc0735cb4   (1140 kB)
>      .text : 0xc0400000 - 0xc0618b21   (2146 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3194.68 BogoMIPS (lpj=1597341)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c079f000 soft=c077f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3191.51 BogoMIPS (lpj=1595757)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
>Total of 2 processors activated (6386.19 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>migration_cost=97
>PM: Adding info for No Bus:platform
>Time: 15:27:50  Date: 02/19/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on device 00:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0C0D:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0E:00
>PM: Adding info for acpi:PNP0C14:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:device:18
>PM: Adding info for acpi:device:19
>PM: Adding info for acpi:device:1a
>PM: Adding info for acpi:device:1b
>PM: Adding info for acpi:device:1c
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:PNP0C0F:08
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:SYN0701:00
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:PNP0A05:00
>PM: Adding info for acpi:PNP0C09:00
>PM: Adding info for acpi:PNP0C0A:00
>PM: Adding info for acpi:ACPI0003:00
>PM: Adding info for acpi:device:1d
>PM: Adding info for acpi:device:1e
>PM: Adding info for acpi:device:1f
>PM: Adding info for acpi:device:20
>PM: Adding info for acpi:device:21
>PM: Adding info for acpi:device:22
>PM: Adding info for acpi:device:23
>PM: Adding info for acpi:device:24
>PM: Adding info for acpi:video:00
>PM: Adding info for acpi:device:25
>PM: Adding info for acpi:device:26
>PM: Adding info for acpi:device:27
>PM: Adding info for acpi:device:28
>PM: Adding info for acpi:video:01
>PM: Adding info for acpi:device:29
>PM: Adding info for acpi:device:2a
>PM: Adding info for acpi:device:2b
>PM: Adding info for acpi:thermal:00
>PM: Adding info for acpi:thermal:01
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>0000:00:14.1: trying to change BAR0 from 01F0 to 01F0
>0000:00:14.1: trying to change BAR1 from 03F4 to 03F4
>0000:00:14.1: trying to change BAR2 from 8450 to 0170
>0000:00:14.1: trying to change BAR3 from 8448 to 0374
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:01.0
>PM: Adding info for pci:0000:00:04.0
>PM: Adding info for pci:0000:00:05.0
>PM: Adding info for pci:0000:00:12.0
>PM: Adding info for pci:0000:00:13.0
>PM: Adding info for pci:0000:00:13.1
>PM: Adding info for pci:0000:00:13.2
>PM: Adding info for pci:0000:00:14.0
>PM: Adding info for pci:0000:00:14.1
>PM: Adding info for pci:0000:00:14.2
>PM: Adding info for pci:0000:00:14.3
>PM: Adding info for pci:0000:00:14.4
>PM: Adding info for pci:0000:00:18.0
>PM: Adding info for pci:0000:00:18.1
>PM: Adding info for pci:0000:00:18.2
>PM: Adding info for pci:0000:00:18.3
>PM: Adding info for pci:0000:01:05.0
>PM: Adding info for pci:0000:06:01.0
>PM: Adding info for pci:0000:06:02.0
>PM: Adding info for pci:0000:06:04.0
>PM: Adding info for pci:0000:06:04.1
>PM: Adding info for pci:0000:06:04.2
>PM: Adding info for pci:0000:06:04.3
>PM: Adding info for pci:0000:06:04.4
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:01: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
>pnp: 00:08: ioport range 0x40b-0x40b has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:08: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:08: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:09: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:09: iomem range 0xfff00000-0xffffffff has been reserved
>pnp: 00:09: iomem range 0x0-0xfff could not be reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>  MEM window: c0100000-c01fffff
>  PREFETCH window: c8000000-cfffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 7, cardbus bridge: 0000:06:04.0
>  IO window: 0000a400-0000a4ff
>  IO window: 0000a800-0000a8ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 58000000-5bffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: a000-afff
>  MEM window: c0200000-c02fffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 20 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2771k freed
>apm: BIOS not found.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1174318069.501:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 2FAC72077D8B575
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PM: Adding info for pci_express:0000:00:04.0:pcie00
>Allocate Port Service[0000:00:04.0:pcie02]
>PM: Adding info for pci_express:0000:00:04.0:pcie02
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PM: Adding info for pci_express:0000:00:05.0:pcie00
>Allocate Port Service[0000:00:05.0:pcie02]
>PM: Adding info for pci_express:0000:00:05.0:pcie02
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI Exception (thermal-0412): AE_NOT_FOUND, Invalid active threshold [0] [20070126]
>ACPI: Thermal Zone [THRM] (47 C)
>PM: Adding info for No Bus:pnp1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:06:04.0 [1025:009f]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:06:04.0, mfunc 0x90501212, devctl 0x44
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
>cs: IO port probe 0xa000-0xafff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>PM: Adding info for No Bus:pcmcia_socket0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio1
>PM: Adding info for serio:serio2
>mice: PS/2 mouse device common for all mice
>PM: Adding info for serio:serio3
>PM: Adding info for serio:serio4
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (version 2.00.00)
>powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
>powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
>Using IPI No-Shortcut mode
>  Magic number: 15:923:487
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 845k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0005000
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0006000
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0007000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_sil 0000:00:12.0: version 2.1
>PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
>ata1: SATA max UDMA/100 cmd 0xf882e080 ctl 0xf882e08a bmdma 0xf882e000 irq 18
>ata2: SATA max UDMA/100 cmd 0xf882e0c0 ctl 0xf882e0ca bmdma 0xf882e008 irq 18
>scsi0 : sata_sil
>PM: Adding info for No Bus:host0
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
>ata1.00: ATA-7: FUJITSU MHV2060BHPL, 0081702E, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>scsi1 : sata_sil
>PM: Adding info for No Bus:host1
>Clocksource tsc unstable (delta = 14059955850 ns)
>ata2: SATA link down (SStatus 0 SControl 310)
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060B 0081 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:14.1 to 64
>ata3: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00018420 irq 14
>ata4: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00018428 irq 15
>scsi2 : pata_atiixp
>PM: Adding info for No Bus:host2
>ata3.00: ATAPI, max UDMA/33
>ata3.00: configured for UDMA/33
>scsi3 : pata_atiixp
>PM: Adding info for No Bus:host3
>PM: Adding info for No Bus:target2:0:0
>scsi 2:0:0:0: CD-ROM            QSI      DVD+-RW SDW-082  LX34 PQ: 0 ANSI: 5
>PM: Adding info for scsi:2:0:0:0
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1816 types, 217 bools, 1 sens, 1024 cats
>security:  60 classes, 63042 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1174318082.999:2): policy loaded auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>PM: Adding info for No Bus:timer
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 21 (level, low) -> IRQ 20
>PM: Adding info for No Bus:eth0
>eth0: RealTek RTL8139 at 0xf884a000, 00:16:d4:69:49:0b, IRQ 20
>eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>EDAC MC: Ver: 2.0.1 Mar 16 2007
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:06:04.2 [1524:0550] (rev 1)
>ACPI: PCI Interrupt 0000:06:04.2[B] -> GSI 23 (level, low) -> IRQ 21
>PM: Adding info for No Bus:mmc0
>mmc0: SDHCI at 0xc0210800 irq 21 DMA
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>PM: Adding info for No Bus:i2c-0
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>input: PC Speaker as /class/input/input3
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>pnp: Device 00:04 does not support disabling.
>rtc_cmos: probe of 00:04 failed with error -16
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 522072k swap on /dev/sda1.  Priority:-1 extents:1 across:522072k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 232991: 150425 | 150426 | 150428 | 150429 | 150430