Attachment 150445 Details for Bug 232584 – Working and Not Working Dmesg

Working and Not Working Dmesg

Working and Not Working dmesg.txt (text/plain), 53.10 KB, created by Daniel Duggan on 2007-03-19 23:58:08 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Duggan

Created: 2007-03-19 23:58:08 UTC

Size: 53.10 KB

patch

obsolete

>Not Working #########################################################################
>Linux version 2.6.20-1.2925.fc6 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Mar 10 19:15:16 EST 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009bc00 end: 000000000009bc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009bc00 size: 0000000000000400 end: 000000000009c000 type: 2
>copy_e820_map() start: 00000000000e9b90 size: 0000000000016470 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007feb0000 end: 000000007ffb0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007ffb0000 size: 000000000000e000 end: 000000007ffbe000 type: 3
>copy_e820_map() start: 000000007ffbe000 size: 0000000000022000 end: 000000007ffe0000 type: 4
>copy_e820_map() start: 000000007ffe0000 size: 0000000000020000 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
>copy_e820_map() start: 00000000ff700000 size: 0000000000900000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
> BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524208) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524208
>early_node_map[1] active PFN ranges
>    0:        0 ->   524208
>On node 0 totalpages: 524208
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2879 pages used for memmap
>  HighMem zone: 291953 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fb520
>ACPI: XSDT (v001 A M I  OEMXSDT  0x07000613 MSFT 0x00000097) @ 0x7ffb0100
>ACPI: FADT (v003 A M I  OEMFACP  0x07000613 MSFT 0x00000097) @ 0x7ffb0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x07000613 MSFT 0x00000097) @ 0x7ffb0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000613 MSFT 0x00000097) @ 0x7ffb0400
>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000613 MSFT 0x00000097) @ 0x7ffbe040
>ACPI: DSDT (v001  A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x508
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Detected 2530.044 MHz processor.
>Built 1 zonelists.  Total pages: 519089
>Kernel command line: ro root=LABEL=/1 nodmraid reiserfs i686 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07aa000 soft=c078a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2068252k/2096832k available (2187k kernel code, 27300k reserved, 1157k data, 236k init, 1179328k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074a000 - 0xc0785000   ( 236 kB)
>      .data : 0xc0622ca1 - 0xc0744494   (1157 kB)
>      .text : 0xc0400000 - 0xc0622ca1   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5061.61 BogoMIPS (lpj=2530805)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ab000 soft=c078b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5081.26 BogoMIPS (lpj=2540630)
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Total of 2 processors activated (10142.87 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -455 usecs TSC skew, fixed it up.
>CPU#1 had 455 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=306
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:03:00.0
>PCI: Transparent bridge - 0000:00:12.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0xc00-0xc0f has been reserved
>pnp: 00:08: ioport range 0xd00-0xd0f has been reserved
>pnp: 00:08: ioport range 0xa20-0xa2f has been reserved
>pnp: 00:08: ioport range 0xa30-0xa3f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: daf00000-daffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: d000-dfff
>  MEM window: db000000-ddefffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Bridge: 0000:00:12.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:16.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:17.0
>  IO window: e000-efff
>  MEM window: ddf00000-dfffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1519k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1174337116.702:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CB44B0DE33F9027F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:16.0
>PCI: Found disabled HT MSI Mapping on 0000:00:00.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0.
>PCI: Found disabled HT MSI Mapping on 0000:00:17.0
>PCI: Found disabled HT MSI Mapping on 0000:00:00.0
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
>NFORCE-CK804: chipset revision 243
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: Maxtor 6B200P0, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 512KiB
>hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
>hdc: cache flushes supported
> hdc: hdc1 hdc2
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Time: acpi_pm clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xdaefe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 17, io mem 0xdaeffc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil24 0000:01:00.0: version 0.3
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ata1: SATA max UDMA/100 cmd 0xF8838000 ctl 0x0 bmdma 0x0 irq 18
>ata2: SATA max UDMA/100 cmd 0xF883A000 ctl 0x0 bmdma 0x0 irq 18
>scsi0 : sata_sil24
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : sata_sil24
>usb 2-2: new high speed USB device using ehci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>sd 1:0:0:0: Attached scsi disk sda
>sata_nv 0000:00:10.0: version 3.2
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 19
>sata_nv 0000:00:10.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>ata3: SATA max UDMA/133 cmd 0xF8836480 ctl 0xF88364A0 bmdma 0xA400 irq 19
>ata4: SATA max UDMA/133 cmd 0xF8836580 ctl 0xF88365A0 bmdma 0xA408 irq 19
>scsi2 : sata_nv
>usb 2-4: new high speed USB device using ehci_hcd and address 4
>usb 2-4: configuration #1 chosen from 1 choice
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : sata_nv
>usb 1-1: configuration #1 chosen from 1 choice
>input: Chicony Saitek Eclipse Keyboard as /class/input/input1
>input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:0b.0-1
>input: Chicony Saitek Eclipse Keyboard as /class/input/input2
>input,hiddev96: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:0b.0-1
>usb 2-2.1: new full speed USB device using ehci_hcd and address 5
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.1-2.1
>input: Logitech USB Receiver as /class/input/input4
>input,hiddev97: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.1-2.1
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata4.00: ata4: dev 0 multi count 16
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>sd 2:0:0:0: Attached scsi disk sdb
>scsi 3:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
>sd 3:0:0:0: Attached scsi disk sdc
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
>sata_nv 0000:00:11.0: Using ADMA mode
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>ata5: SATA max UDMA/133 cmd 0xF8850480 ctl 0xF88504A0 bmdma 0x9800 irq 20
>ata6: SATA max UDMA/133 cmd 0xF8850580 ctl 0xF88505A0 bmdma 0x9808 irq 20
>scsi4 : sata_nv
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata5.00: ata5: dev 0 multi count 16
>ata5.00: configured for UDMA/133
>scsi5 : sata_nv
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>ata5: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 >
>sd 4:0:0:0: Attached scsi disk sdd
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1174337124.046:2): selinux=0 auid=4294967295
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
>Floppy drive(s): fd0 is 1.44M
>input: PC Speaker as /class/input/input5
>FDC 0 is a post-1991 82077
>EDAC MC: Ver: 2.0.1 Mar 10 2007
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0924 pid 0xFFF1
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>forcedeth: using HIGHDMA
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>intel8x0_measure_ac97_clock: measured 50476 usecs
>intel8x0: clocking to 46894
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>ReiserFS: sda1: found reiserfs format "3.6" with standard journal
>ReiserFS: sda1: using ordered data mode
>ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda1: checking transaction log (sda1)
>ReiserFS: sda1: Using r5 hash to sort names
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>Adding 2048248k swap on /dev/sdc5.  Priority:-1 extents:1 across:2048248k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>/dev/vmmon[2582]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2582]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2609 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2624 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-5: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-6: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-7: SMBus Quick command not supported, can't probe for chips
>it87: Found IT8712F chip at 0xd00, revision 7
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>/dev/vmnet: open called by PID 2921 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2922 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2949 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2948 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>#####################################################################################
>Working
>Linux version 2.6.19-1.2911.6.5.fc6 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sun Mar 4 16:41:13 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
> BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524208) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524208
>early_node_map[1] active PFN ranges
>    0:        0 ->   524208
>On node 0 totalpages: 524208
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2303 pages used for memmap
>  HighMem zone: 292529 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v002 ACPIAM                                ) @ 0x000fb520
>ACPI: XSDT (v001 A M I  OEMXSDT  0x07000613 MSFT 0x00000097) @ 0x7ffb0100
>ACPI: FADT (v003 A M I  OEMFACP  0x07000613 MSFT 0x00000097) @ 0x7ffb0290
>ACPI: MADT (v001 A M I  OEMAPIC  0x07000613 MSFT 0x00000097) @ 0x7ffb0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x07000613 MSFT 0x00000097) @ 0x7ffb0400
>ACPI: OEMB (v001 A M I  AMI_OEM  0x07000613 MSFT 0x00000097) @ 0x7ffbe040
>ACPI: DSDT (v001  A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x508
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Detected 2530.026 MHz processor.
>Built 1 zonelists.  Total pages: 520113
>Kernel command line: ro root=LABEL=/1 nodmraid reiserfs i686 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0806000 soft=c07e6000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2071860k/2096832k available (2210k kernel code, 23672k reserved, 1131k data, 240k init, 1179328k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc07a5000 - 0xc07e1000   ( 240 kB)
>      .data : 0xc0628b07 - 0xc07438f4   (1131 kB)
>      .text : 0xc0400000 - 0xc0628b07   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5061.59 BogoMIPS (lpj=2530799)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0807000 soft=c07e7000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5059.26 BogoMIPS (lpj=2529632)
>CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000003
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ stepping 02
>Total of 2 processors activated (10120.86 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -64 usecs TSC skew, fixed it up.
>CPU#1 had 64 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=315
>checking if image is initramfs... it is
>Freeing initrd memory: 1520k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:03:00.0
>PCI: Transparent bridge - 0000:00:12.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0xc00-0xc0f has been reserved
>pnp: 00:08: ioport range 0xd00-0xd0f has been reserved
>pnp: 00:08: ioport range 0xa20-0xa2f has been reserved
>pnp: 00:08: ioport range 0xa30-0xa3f has been reserved
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: daf00000-daffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: d000-dfff
>  MEM window: db000000-ddefffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Bridge: 0000:00:12.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:16.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:17.0
>  IO window: e000-efff
>  MEM window: ddf00000-dfffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1174336838.703:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 9C0E3DC846415CB5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found HT MSI mapping on 0000:00:16.0 with capability disabled
>PCI: Found HT MSI mapping on 0000:00:00.0 with capability disabled
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0.
>PCI: Found HT MSI mapping on 0000:00:17.0 with capability disabled
>PCI: Found HT MSI mapping on 0000:00:00.0 with capability disabled
>PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[02fc:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pcie_portdrv_probe->Dev[02fd:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[02fb:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
>NFORCE-CK804: chipset revision 243
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: Maxtor 6B200P0, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hdc: max request size: 512KiB
>hdc: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63, UDMA(133)
>hdc: cache flushes supported
> hdc: hdc1 hdc2
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 415k
>Time: acpi_pm clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xdaefe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 17, io mem 0xdaeffc00
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil24 0000:01:00.0: version 0.3
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ata1: SATA max UDMA/100 cmd 0xF8850000 ctl 0x0 bmdma 0x0 irq 18
>ata2: SATA max UDMA/100 cmd 0xF8852000 ctl 0x0 bmdma 0x0 irq 18
>scsi0 : sata_sil24
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : sata_sil24
>usb 2-2: new high speed USB device using ehci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 31/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/100
>scsi 1:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 1:0:0:0: Attached scsi disk sda
>sata_nv 0000:00:10.0: version 2.0
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>ata3: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 19
>ata4: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 19
>scsi2 : sata_nv
>usb 2-4: new high speed USB device using ehci_hcd and address 4
>usb 2-4: configuration #1 chosen from 1 choice
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : sata_nv
>usb 1-1: configuration #1 chosen from 1 choice
>input: Chicony Saitek Eclipse Keyboard as /class/input/input0
>input: USB HID v1.11 Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:0b.0-1
>input: Chicony Saitek Eclipse Keyboard as /class/input/input1
>input,hiddev96: USB HID v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:0b.0-1
>usb 2-2.1: new full speed USB device using ehci_hcd and address 5
>usb 2-2.1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input2
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.1-2.1
>input: Logitech USB Receiver as /class/input/input3
>input,hiddev97: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.1-2.1
>ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata4.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/32)
>ata4.00: ata4: dev 0 multi count 16
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 sdb6 >
>sd 2:0:0:0: Attached scsi disk sdb
>scsi 3:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 234441648 512-byte hdwr sectors (120034 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 >
>sd 3:0:0:0: Attached scsi disk sdc
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>ata5: SATA max UDMA/133 cmd 0xA080 ctl 0xA002 bmdma 0x9800 irq 20
>ata6: SATA max UDMA/133 cmd 0x9C00 ctl 0x9882 bmdma 0x9808 irq 20
>scsi4 : sata_nv
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 NCQ (depth 0/32)
>ata5.00: ata5: dev 0 multi count 16
>ata5.00: configured for UDMA/133
>scsi5 : sata_nv
>ata6: SATA link down (SStatus 0 SControl 300)
>scsi 4:0:0:0: Direct-Access     ATA      ST3120813AS      2AAA PQ: 0 ANSI: 5
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 234441648 512-byte hdwr sectors (120034 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 sdd3 sdd4 < sdd5 >
>sd 4:0:0:0: Attached scsi disk sdd
>ReiserFS: sda3: found reiserfs format "3.6" with standard journal
>ReiserFS: sda3: using ordered data mode
>ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda3: checking transaction log (sda3)
>ReiserFS: sda3: Using r5 hash to sort names
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1174336845.660:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 3:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:0: Attached scsi generic sg3 type 0
>EDAC MC: Ver: 2.0.1 Mar  4 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0924 pid 0xFFF1
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LMAC] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:13.0 to 64
>forcedeth: using HIGHDMA
>eth0: forcedeth.c: subsystem: 01043:8141 bound to 0000:00:13.0
>hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>intel8x0_measure_ac97_clock: measured 50722 usecs
>intel8x0: clocking to 46820
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>ReiserFS: sda1: found reiserfs format "3.6" with standard journal
>ReiserFS: sda1: using ordered data mode
>ReiserFS: sda1: journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda1: checking transaction log (sda1)
>ReiserFS: sda1: Using r5 hash to sort names
>ReiserFS: sda2: found reiserfs format "3.6" with standard journal
>ReiserFS: sda2: using ordered data mode
>ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sda2: checking transaction log (sda2)
>ReiserFS: sda2: Using r5 hash to sort names
>Adding 2048248k swap on /dev/sdc5.  Priority:-1 extents:1 across:2048248k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 232 bytes per conntrack
>/dev/vmmon[2500]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2500]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2525 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2540 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>i2c_adapter i2c-2: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-3: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-4: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-5: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-6: SMBus Quick command not supported, can't probe for chips
>i2c_adapter i2c-7: SMBus Quick command not supported, can't probe for chips
>it87: Found IT8712F chip at 0xd00, revision 7
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>/dev/vmnet: open called by PID 2823 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2822 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2873 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2874 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>#####################################################################################

Actions: View

Attachments on bug 232584: 150201 | 150445 | 150718 | 152601 | 152602 | 152666 | 152667