Attachment 150829 Details for Bug 227207 – lspci output

lspci output

lspci-vv.txt (text/plain), 8.34 KB, created by William Shotts on 2007-03-24 15:36:05 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: William Shotts

Created: 2007-03-24 15:36:05 UTC

Size: 8.34 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation 82810E DC-133 GMCH [Graphics Memory Controller Hub] (rev 03)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>
>00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 CGC [Chipset Graphics Controller] (rev 03) (prog-if 00 [VGA])
>	Subsystem: Intel Corporation Unknown device 7123
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 9
>	Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
>	Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
>	Capabilities: [dc] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00002000-00002fff
>	Memory behind bridge: f4100000-f41fffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02) (prog-if 80 [Master])
>	Subsystem: Intel Corporation 82801AA IDE Controller
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at 10a0 [size=16]
>
>00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02) (prog-if 00 [UHCI])
>	Subsystem: Intel Corporation 82801AA USB Controller
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 11
>	Region 4: I/O ports at 1080 [size=32]
>
>00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
>	Subsystem: Intel Corporation 82801AA SMBus Controller
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 9
>	Region 4: I/O ports at 10b0 [size=16]
>
>01:08.0 Multimedia audio controller: Rockwell International Unknown device 4310
>	Subsystem: Risq Modular Systems, Inc. Unknown device 4310
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 9
>	Region 0: I/O ports at 2000 [size=64]
>	Capabilities: [40] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:08.1 Communication controller: Rockwell International Riptide HSF 56k PCI Modem
>	Subsystem: Risq Modular Systems, Inc. Unknown device 4311
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at f4100000 (32-bit, non-prefetchable) [disabled] [size=64K]
>	Capabilities: [40] Power Management version 1
>		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:08.2 Input device controller: Rockwell International Unknown device 4312
>	Subsystem: Risq Modular Systems, Inc. Unknown device 4312
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at f4110000 (32-bit, non-prefetchable) [disabled] [size=4K]
>	Capabilities: [40] Power Management version 1
>		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:09.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
>	Subsystem: NEC Corporation Hama USB 2.0 CardBus
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 9
>	Region 0: Memory at f4111000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:09.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
>	Subsystem: NEC Corporation Hama USB 2.0 CardBus
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin B routed to IRQ 10
>	Region 0: Memory at f4112000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:09.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
>	Subsystem: Unknown device 0ee4:3383
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 11
>	Region 0: Memory at f4113000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:0a.0 Ethernet controller: Accton Technology Corporation SMC2-1211TX (rev 10)
>	Subsystem: Hewlett-Packard Company Unknown device 9207
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 10
>	Region 0: I/O ports at 2400 [size=256]
>	Region 1: Memory at f4113400 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:0b.0 Communication controller: Conexant HSF 56k HSFi Modem (rev 01)
>	Subsystem: Conexant Dynalink 56PMi
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64
>	Interrupt: pin A routed to IRQ 255
>	Region 0: Memory at f4120000 (32-bit, non-prefetchable) [disabled] [size=64K]
>	Region 1: I/O ports at 2040 [disabled] [size=8]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 227207: 150828 | 150829 | 151386 | 153577 | 153578 | 153639