Attachment 150831 Details for Bug 233748 – output of dmesg

output of dmesg

dmesg.output (text/plain), 39.10 KB, created by Bernd Bartmann on 2007-03-24 16:35:20 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernd Bartmann

Created: 2007-03-24 16:35:20 UTC

Size: 39.10 KB

patch

obsolete

>Linux version 2.6.20-1.3017.fc7 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 23:00:37 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F8CB0, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFB0000, 0034 (r1 A_M_I  OEMRSDT  12000620 MSFT       97)
>ACPI: FACP 7FFB0200, 0084 (r2 A M I  OEMFACP  12000620 MSFT       97)
>ACPI: DSDT 7FFB0440, 5095 (r1  CRXR2 CRXR2167      167 INTL  2002026)
>ACPI: FACS 7FFC0000, 0040
>ACPI: APIC 7FFB0390, 006C (r1 A_M_I  OEMAPIC  12000620 MSFT       97)
>ACPI: MCFG 7FFB0400, 003C (r1 A_M_I  OEMMCFG  12000620 MSFT       97)
>ACPI: OEMB 7FFC0040, 0046 (r1 A_M_I  AMI_OEM  12000620 MSFT       97)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2364 pages reserved
>  DMA zone: 1547 pages, LIFO batch:0
>  DMA32 zone: 11174 pages used for memmap
>  DMA32 zone: 508938 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ed00000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510485
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2393.419 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2035356k/2096832k available (2461k kernel code, 61088k reserved, 1444k data, 332k init)
>Calibrating delay using timer specific routine.. 4789.37 BogoMIPS (lpj=2394686)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 16620953
>Detected 16.620 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4786.13 BogoMIPS (lpj=2393066)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=22
>PM: Adding info for No Bus:platform
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
>PCI: Using MMCONFIG at e0000000 - efffffff
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:ACPI0007:02
>PM: Adding info for acpi:ACPI0007:03
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0A08:00
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0700:00
>PM: Adding info for acpi:PNP0401:00
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:INT0800:00
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:PNP0C02:02
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:PNP0C02:03
>PM: Adding info for acpi:PNP0C02:04
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:device:18
>PM: Adding info for acpi:device:19
>PM: Adding info for acpi:device:1a
>PM: Adding info for acpi:device:1b
>PM: Adding info for acpi:device:1c
>PM: Adding info for acpi:device:1d
>PM: Adding info for acpi:device:1e
>PM: Adding info for acpi:device:1f
>PM: Adding info for acpi:device:20
>PM: Adding info for acpi:device:21
>PM: Adding info for acpi:device:22
>PM: Adding info for acpi:device:23
>PM: Adding info for acpi:device:24
>PM: Adding info for acpi:device:25
>PM: Adding info for acpi:device:26
>PM: Adding info for acpi:PNP0C01:01
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 08F0 to 0170
>0000:00:1f.1: trying to change BAR3 from 08F8 to 0374
>Boot video device is 0000:05:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:01.0
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1c.4
>PM: Adding info for pci:0000:00:1c.5
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.1
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:05:00.0
>PM: Adding info for pci:0000:02:00.0
>PM: Adding info for pci:0000:01:02.0
>PM: Adding info for pci:0000:01:07.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>PM: Adding info for pnp:00:0d
>PM: Adding info for pnp:00:0e
>PM: Adding info for pnp:00:0f
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
>pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
>pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:0a: iomem range 0xffc00000-0xfff7ffff has been reserved
>pnp: 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0d: ioport range 0x290-0x29f has been reserved
>pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0f: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0x100000-0x7fffffff could not be reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PCI: Bridge: 0000:00:01.0
>  IO window: e000-efff
>  MEM window: fc000000-febfffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: cff00000-cfffffff
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: cfe00000-cfefffff
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: 88000000-880fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3062k freed
>PM: Adding info for No Bus:mcelog
>PM: Adding info for No Bus:msr0
>PM: Adding info for No Bus:msr1
>PM: Adding info for No Bus:cpu0
>PM: Adding info for No Bus:cpu1
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1174756532.647:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F3B9BE0EB7EAFE4F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PM: Adding info for pci_express:0000:00:01.0:pcie00
>Allocate Port Service[0000:00:01.0:pcie03]
>PM: Adding info for pci_express:0000:00:01.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>Allocate Port Service[0000:00:1c.0:pcie03]
>PM: Adding info for pci_express:0000:00:1c.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PM: Adding info for pci_express:0000:00:1c.4:pcie00
>Allocate Port Service[0000:00:1c.4:pcie02]
>PM: Adding info for pci_express:0000:00:1c.4:pcie02
>Allocate Port Service[0000:00:1c.4:pcie03]
>PM: Adding info for pci_express:0000:00:1c.4:pcie03
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>PM: Adding info for pci_express:0000:00:1c.5:pcie00
>Allocate Port Service[0000:00:1c.5:pcie02]
>PM: Adding info for pci_express:0000:00:1c.5:pcie02
>Allocate Port Service[0000:00:1c.5:pcie03]
>PM: Adding info for pci_express:0000:00:1c.5:pcie03
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI Warning (tbutils-0158): Incorrect checksum in table [OEMB] -  13, should be 06 [20070126]
>ACPI: SSDT 7FFC0090, 01D2 (r1    AMI   CPU1PM        1 INTL 20051117)
>ACPI: SSDT 7FFC0270, 0143 (r1    AMI   CPU2PM        1 INTL 20051117)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1057k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a880
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b080
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbdff800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/all, error -71
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ahci 0000:00:1f.2: version 2.1
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>PM: Adding info for usb:5-1
>PM: Adding info for No Bus:usbdev5.2_ep00
>usb 5-1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-1:1.0
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev5.2_ep81
>PM: Adding info for No Bus:usbdev5.2
>usb 5-7: new high speed USB device using ehci_hcd and address 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xffffc2000002ed00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata2: SATA max UDMA/133 cmd 0xffffc2000002ed80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata3: SATA max UDMA/133 cmd 0xffffc2000002ee00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata4: SATA max UDMA/133 cmd 0xffffc2000002ee80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>scsi0 : ahci
>PM: Adding info for No Bus:host0
>PM: Adding info for usb:5-7
>PM: Adding info for No Bus:usbdev5.4_ep00
>usb 5-7: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-7:1.0
>PM: Adding info for No Bus:usbdev5.4_ep81
>PM: Adding info for No Bus:usbdev5.4_ep02
>PM: Adding info for No Bus:usbdev5.4
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-1.4: new low speed USB device using ehci_hcd and address 5
>PM: Adding info for usb:5-1.4
>PM: Adding info for No Bus:usbdev5.5_ep00
>usb 5-1.4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-1.4:1.0
>PM: Adding info for No Bus:usbdev5.5
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: Maxtor 7Y250M0, YAR511W0, max UDMA/133
>ata1.00: 490234752 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>PM: Adding info for No Bus:host1
>usb 1-2: new full speed USB device using uhci_hcd and address 4
>PM: Adding info for usb:1-2
>PM: Adding info for No Bus:usbdev1.4_ep00
>usb 1-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-2:1.0
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>PM: Adding info for No Bus:host2
>PM: Adding info for No Bus:usbdev1.4_ep81
>PM: Adding info for No Bus:usbdev1.4
>usb 1-2.1: new low speed USB device using uhci_hcd and address 5
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>PM: Adding info for No Bus:host3
>PM: Adding info for usb:1-2.1
>PM: Adding info for No Bus:usbdev1.5_ep00
>usb 1-2.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-2.1:1.0
>input: Cherry GmbH as /class/input/input1
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.0-2.1
>PM: Adding info for No Bus:usbdev1.5_ep81
>PM: Adding info for No Bus:usbdev1.5
>usb 1-2.4: new full speed USB device using uhci_hcd and address 6
>ata4: SATA link down (SStatus 0 SControl 300)
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for usb:1-2.4
>PM: Adding info for No Bus:usbdev1.6_ep00
>usb 1-2.4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-2.4:1.0
>input: Logitech USB Gaming Mouse as /class/input/input2
>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2.4
>PM: Adding info for No Bus:usbdev1.6_ep81
>PM: Adding info for usb:1-2.4:1.1
>PM: Adding info for No Bus:hiddev0
>hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2.4
>PM: Adding info for No Bus:usbdev1.6_ep82
>PM: Adding info for No Bus:usbdev1.6
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>scsi4 : ata_piix
>PM: Adding info for No Bus:host4
>ata5.00: ATAPI, max UDMA/33
>ata5.01: ATAPI, max UDMA/33
>ata5.00: configured for UDMA/33
>ata5.01: configured for UDMA/33
>scsi5 : ata_piix
>PM: Adding info for No Bus:host5
>ata6: port disabled. ignoring.
>PM: Adding info for No Bus:target4:0:0
>scsi 4:0:0:0: CD-ROM            AOPEN    DVD1648/AAP      1.06 PQ: 0 ANSI: 5
>PM: Adding info for scsi:4:0:0:0
>PM: Adding info for No Bus:target4:0:1
>scsi 4:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-4120B A115 PQ: 0 ANSI: 5
>PM: Adding info for scsi:4:0:1:0
>Initializing USB Mass Storage driver...
>scsi6 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host6
>usb-storage: device found at 4
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>PM: Adding info for No Bus:target6:0:0
>scsi 6:0:0:0: Direct-Access     USB2.0   CardReader CF RW 0.0> PQ: 0 ANSI: 0
>scsi 6:0:0:1: Direct-Access     USB2.0   CardReader Combo 0.0> PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target6:0:1
>PM: Removing info for No Bus:target6:0:1
>PM: Adding info for No Bus:target6:0:2
>PM: Removing info for No Bus:target6:0:2
>PM: Adding info for No Bus:target6:0:3
>PM: Removing info for No Bus:target6:0:3
>PM: Adding info for No Bus:target6:0:4
>PM: Removing info for No Bus:target6:0:4
>PM: Adding info for No Bus:target6:0:5
>PM: Removing info for No Bus:target6:0:5
>PM: Adding info for No Bus:target6:0:6
>PM: Removing info for No Bus:target6:0:6
>PM: Adding info for No Bus:target6:0:7
>PM: Removing info for No Bus:target6:0:7
>PM: Adding info for scsi:6:0:0:0
>sd 6:0:0:0: Attached scsi removable disk sdb
>PM: Adding info for scsi:6:0:0:1
>sd 6:0:0:1: Attached scsi removable disk sdc
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1174756550.232:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1665 types, 208 bools, 1 sens, 1024 cats
>security:  59 classes, 58865 rules
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1174756550.521:3): policy loaded auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>scsi 4:0:1:0: Attached scsi generic sg2 type 5
>sd 6:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:1: Attached scsi generic sg4 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>PM: Adding info for platform:floppy.0
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 4:0:1:0: Attached scsi CD-ROM sr1
>PM: Adding info for No Bus:timer
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>intel_rng: FWH not detected
>rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:03 failed with error -16
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>PM: Adding info for No Bus:i2c-0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 23
>e1000: 0000:01:02.0: e1000_probe: (PCI:33MHz:32-bit) 00:07:e9:15:ca:e4
>PM: Adding info for No Bus:eth0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:01:07.0[A] -> GSI 22 (level, low) -> IRQ 22
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>PM: Adding info for No Bus:seq
>fw_ohci: Added fw-ohci device 0000:01:07.0, OHCI version 1.10
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>PM: Adding info for No Bus:eth1
>eth1: RTL8168b/8111b at 0xffffc20000076000, 00:13:8f:d3:3a:33, IRQ 17
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>PM: Adding info for firewire:fw0
>fw_core: created new fw device fw0 (0 config rom retries)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda6, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:microcode
>PM: Adding info for platform:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Removing info for No Bus:microcode
>PM: Removing info for platform:microcode
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
>r8169: eth1: link up
>r8169: eth1: link up
>audit(1174752967.721:4): audit_pid=2339 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7

Actions: View

Attachments on bug 233748: 150831 | 150832