Attachment 151060 Details for Bug 234219 – dmesg from affected system

dmesg from affected system

dmesg (text/plain), 20.92 KB, created by Thomas J. Baker on 2007-03-27 18:40:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Thomas J. Baker

Created: 2007-03-27 18:40:53 UTC

Size: 20.92 KB

patch

obsolete

>Linux version 2.6.18-8.1.1.el5 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Mon Feb 26 20:38:02 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe8ac00 (usable)
> BIOS-e820: 000000007fe8ac00 - 000000007fe8cc00 (ACPI NVS)
> BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI data)
> BIOS-e820: 000000007fe8ec00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 523914
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 294538 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: DELL     Product ID: WS 380       APIC at: 0xFEE00000
>Processor #0 15:4 APIC version 20
>Processor #1 15:4 APIC version 20
>I/O APIC #8 Version 32 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Detected 6700.909 MHz processor.
>Built 1 zonelists.  Total pages: 523914
>Kernel command line: ro root=/dev/vgs0/root rhgb quiet acpi=off
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0737000 soft=c0717000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2070908k/2095656k available (2043k kernel code, 23532k reserved, 846k data, 232k init, 1178152k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 21962.72 BogoMIPS (lpj=10981362)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 0000649d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0738000 soft=c0718000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 14170.83 BogoMIPS (lpj=7085417)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000649d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 0000649d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 04
>Total of 2 processors activated (36133.55 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=384
>checking if image is initramfs... it is
>Freeing initrd memory: 2304k freed
>NET: Registered protocol family 16
>ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread F7D81AA0 could not acquire Mutex [2] [20060707]
>PCI: PCI BIOS revision 2.10 entry at 0xfbc83, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0
>PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:1c.4[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:1c.5[B] -> IRQ 169
>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 201
>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 209
>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 177
>PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 217
>PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 201
>PCI->APIC IRQ transform: 0000:00:1f.1[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:00:1f.2[C] -> IRQ 193
>PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 169
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 161
>PCI->APIC IRQ transform: 0000:04:00.0[A] -> IRQ 169
>PCI->APIC IRQ transform: 0000:05:02.0[A] -> IRQ 177
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc000000-feafffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: disabled.
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fbd00000-fbdfffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1174940249.893:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 5A04B19EFCD3A009
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>Allocate Port Service[0000:00:1c.5:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: SONY CD-RW/DVD-ROM CRX330E, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 383k
>Time: tsc clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 201, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 209, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 177, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 217, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 201, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/64, error -71
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xF8810D00 ctl 0x0 bmdma 0x0 irq 74
>ata2: SATA max UDMA/133 cmd 0xF8810D80 ctl 0x0 bmdma 0x0 irq 74
>ata3: SATA max UDMA/133 cmd 0xF8810E00 ctl 0x0 bmdma 0x0 irq 74
>ata4: SATA max UDMA/133 cmd 0xF8810E80 ctl 0x0 bmdma 0x0 irq 74
>scsi0 : ahci
>usb 5-6: new high speed USB device using ehci_hcd and address 5
>usb 5-6: configuration #1 chosen from 1 choice
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-6, max UDMA/133, 156250000 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>usb 1-1: device descriptor read/64, error -71
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi2 : ahci
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: device descriptor read/64, error -71
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 976773168 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 8
>ata3.00: configured for UDMA/133
>scsi3 : ahci
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 5
>ata4: SATA link down (SStatus 0 SControl 300)
>  Vendor: ATA       Model: WDC WD800GD-75FL  Rev: 32.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 156250000 512-byte hdwr sectors (80000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>  Vendor: ATA       Model: HDS725050KLA360   Rev: K2AO
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: drive cache: write back
> sdb: sdb1
>sd 2:0:0:0: Attached scsi disk sdb
>Initializing USB Mass Storage driver...
>usb 1-1: device not accepting address 5, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 6
>usb 1-1: device not accepting address 6, error -71
>usb 1-2: new low speed USB device using uhci_hcd and address 7
>usb 1-2: configuration #1 chosen from 1 choice
>input: DELL DELL USB Keyboard as /class/input/input0
>input: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-2
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1
>usb 5-6.1: new high speed USB device using ehci_hcd and address 6
>usb 5-6.1: configuration #1 chosen from 1 choice
>hub 5-6.1:1.0: USB hub found
>hub 5-6.1:1.0: 4 ports detected
>usb 5-6.2: new high speed USB device using ehci_hcd and address 7
>usb 5-6.2: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>  Vendor: SMSC      Model: 223 U HS-CF       Rev: 3.60
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:0: Attached scsi removable disk sdc
>  Vendor: SMSC      Model: 223 U HS-MS       Rev: 3.60
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:1: Attached scsi removable disk sdd
>  Vendor: SMSC      Model: 223 U HS-SM       Rev: 3.60
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:2: Attached scsi removable disk sde
>  Vendor: SMSC      Model: 223 U HS-SD/MMC   Rev: 3.60
>  Type:   Direct-Access                      ANSI SCSI revision: 00
>sd 4:0:0:3: Attached scsi removable disk sdf
>usb-storage: device scan complete
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1174940264.969:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49771 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1174940265.056:3): policy loaded auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 4:0:0:1: Attached scsi generic sg3 type 0
>sd 4:0:0:2: Attached scsi generic sg4 type 0
>sd 4:0:0:3: Attached scsi generic sg5 type 0
>tg3.c:v3.65-rh (November 20, 2006)
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:12:3f:78:4c:b8
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>input: PC Speaker as /class/input/input2
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>hda: ATAPI 48X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>nvidia: module license 'NVIDIA' taints kernel.
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
>parport0: irq 7 detected
>lp0: using parport0 (polling).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>Adding 2097144k swap on /dev/vgs0/swap.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 234219: 151060