Attachment 151184 Details for Bug 224680 – dmesg output for 2.6.20-1.2937.fc6

dmesg output for 2.6.20-1.2937.fc6

dmesg.2.6.20-1.2937.fc6 (text/plain), 26.41 KB, created by Chris P on 2007-03-29 10:08:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Chris P

Created: 2007-03-29 10:08:25 UTC

Size: 26.41 KB

patch

obsolete

>Linux version 2.6.20-1.2937.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sun Mar 25 20:34:49 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6cf0
>ACPI: RSDT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000007fee3040
>ACPI: FADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000007fee30c0
>ACPI: HPET (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x00000098) @ 0x000000007fee7cc0
>ACPI: MCFG (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000007fee7d40
>ACPI: MADT (v001 GBT    GBTUACPI 0x42302e31 GBTU 0x01010101) @ 0x000000007fee7bc0
>ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x000000007fee7dc0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x000000007fee8250
>ACPI: DSDT (v001 GBT    GBTUACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fee0000
>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524000) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fee0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      158
>    0:      256 ->   524000
>On node 0 totalpages: 523902
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1322 pages reserved
>  DMA zone: 2612 pages, LIFO batch:0
>  DMA32 zone: 8123 pages used for memmap
>  DMA32 zone: 511781 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009e000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514393
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2051756k/2096000k available (2451k kernel code, 43852k reserved, 1457k data, 316k init)
>Calibrating delay using timer specific routine.. 4269.61 BogoMIPS (lpj=2134807)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 16666671
>Detected 16.666 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4266.57 BogoMIPS (lpj=2133285)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>Brought up 2 CPUs
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 2133.334 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=17
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at e0000000
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 8000-8fff
>  MEM window: e4000000-e6ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 7000-7fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 9000-afff
>  MEM window: ed000000-ed0fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: b000-bfff
>  MEM window: e7000000-e8ffffff
>  PREFETCH window: 80000000-800fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: e9000000-ecffffff
>  PREFETCH window: ed100000-ed1fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2343k freed
>audit: initializing netlink socket (disabled)
>audit(1175162163.430:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5103E2602692B7F5
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>Allocate Port Service[0000:00:1c.0:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>Allocate Port Service[0000:00:1c.3:pcie03]
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>Allocate Port Service[0000:00:1c.4:pcie02]
>Allocate Port Service[0000:00:1c.4:pcie03]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI: Processor [CPU1] (supports 2 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 965G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>jmicron_init_one: device = 2363, driver_data = 1
>JMB363: IDE controller at PCI slot 0000:03:00.1
>ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 16
>    ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: SONY DVD RW DRU-700A, ATAPI CD/DVD-ROM drive
>hda: hw_config=0000
>hda: hw_config=0000
>ide0 at 0x9000-0x9007,0x9402 on irq 16
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1041k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xed204000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xed205000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 5-1: new low speed USB device using uhci_hcd and address 3
>usb 5-1: configuration #1 chosen from 1 choice
>usb 5-2: new full speed USB device using uhci_hcd and address 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xFFFFC20000022100 ctl 0x0 bmdma 0x0 irq 2299
>ata2: SATA max UDMA/133 cmd 0xFFFFC20000022180 ctl 0x0 bmdma 0x0 irq 2299
>ata3: DUMMY
>ata4: DUMMY
>ata5: SATA max UDMA/133 cmd 0xFFFFC20000022300 ctl 0x0 bmdma 0x0 irq 2299
>ata6: SATA max UDMA/133 cmd 0xFFFFC20000022380 ctl 0x0 bmdma 0x0 irq 2299
>scsi0 : ahci
>usb 5-2: configuration #1 chosen from 1 choice
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 31/32)
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 31/32)
>ata2.00: configured for UDMA/133
>scsi2 : ahci
>scsi3 : ahci
>scsi4 : ahci
>ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata5.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 31/32)
>ata5.00: configured for UDMA/133
>scsi5 : ahci
>ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata6.00: ATA-7, max UDMA/133, 1465149168 sectors: LBA48 NCQ (depth 31/32)
>ata6.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 1465149168 512-byte hdwr sectors (750156 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 1465149168 512-byte hdwr sectors (750156 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: Attached scsi disk sdb
>scsi 4:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 4:0:0:0: Attached scsi disk sdc
>scsi 5:0:0:0: Direct-Access     ATA      ST3750640NS      3.AE PQ: 0 ANSI: 5
>SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 1465149168 512-byte hdwr sectors (750156 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 5:0:0:0: Attached scsi disk sdd
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata7: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0x0 bmdma 0x0 irq 19
>ata8: SATA max UDMA/133 cmd 0xFFFFC20000024180 ctl 0x0 bmdma 0x0 irq 19
>scsi6 : ahci
>ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata7.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 31/32)
>ata7.00: configured for UDMA/133
>scsi7 : ahci
>ata8: SATA link down (SStatus 0 SControl 300)
>scsi 6:0:0:0: Direct-Access     ATA      ST3250620NS      3.AE PQ: 0 ANSI: 5
>SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sde: 488397168 512-byte hdwr sectors (250059 MB)
>sde: Write Protect is off
>sde: Mode Sense: 00 3a 00 00
>SCSI device sde: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sde: sde1 sde2
>sd 6:0:0:0: Attached scsi disk sde
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1175162172.986:2): selinux=0 auid=4294967295
>input: eGalax Inc. USB TouchController as /class/input/input3
>usbcore: registered new interface driver usbtouchscreen
>input: PC Speaker as /class/input/input4
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
>Linux video capture interface: v2.00
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>sky2 v1.10 addr 0xe8000000 irq 16 Yukon-EC Ultra (0xb4) rev 2
>sky2 eth0: addr 00:16:e6:d5:16:57
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>cx2388x alsa driver version 0.0.6 loaded
>ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 18 (level, low) -> IRQ 18
>CORE cx88[0]: subsystem: 1822:0019, board: digitalnow DNTV Live! DVB-T Pro [card=42,autodetected]
>TV tuner 63 at 0x1fe, Radio tuner -1 at 0x1fe
>cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
>input: cx88 IR (digitalnow DNTV Live!  as /class/input/input5
>cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt 0000:05:02.2[A] -> GSI 18 (level, low) -> IRQ 18
>cx88[0]/2: found at 0000:05:02.2, rev: 5, irq: 18, latency: 32, mmio: 0xeb000000
>cannot find the slot for index 0 (range 0-0)
>hda-intel: Error creating card!
>HDA Intel: probe of 0000:00:1b.0 failed with error -12
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 20 (level, low) -> IRQ 20
>bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 20, latency: 32, mmio: 0xed100000
>bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
>bttv0: using: Twinhan DST + clones [card=113,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00f708ff [init]
>bttv0: using tuner=4
>cx2388x v4l2 driver version 0.0.6 loaded
>tuner 1-0061: chip found @ 0xc2 (cx88[0])
>tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
>tuner 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
>bttv0: add subdevice "dvb0"
>bttv: Bt8xx card found (1).
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 32, mmio: 0xed102000
>bttv1: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
>bttv1: using: Twinhan DST + clones [card=113,autodetected]
>bttv1: gpio: en=00000000, out=00000000 in=00f700ff [init]
>bttv1: using tuner=4
>bttv1: add subdevice "dvb1"
>ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>cx88[0]/0: found at 0000:05:02.0, rev: 5, irq: 18, latency: 32, mmio: 0xe9000000
>cx88[0]/0: registered device video0 [v4l2]
>cx88[0]/0: registered device vbi0
>cx88[0]/0: registered device radio0
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:0: Attached scsi generic sg3 type 0
>sd 6:0:0:0: Attached scsi generic sg4 type 0
>bt878: AUDIO driver version 0.0.0 loaded
>bt878: Bt878 AUDIO function found (0).
>ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 20 (level, low) -> IRQ 20
>bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
>bt878(0): Bt878 (rev 17) at 05:00.1, irq: 20, latency: 32, memory: 0xed101000
>bt878: Bt878 AUDIO function found (1).
>ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 19 (level, low) -> IRQ 19
>bt878_probe: card id=[0x11822],[ Twinhan VisionPlus DVB ] has DVB functions.
>bt878(1): Bt878 (rev 17) at 05:01.1, irq: 19, latency: 32, memory: 0xed103000
>cx2388x dvb driver version 0.0.6 loaded
>cx8802_register_driver() ->registering driver type=dvb access=shared
>CORE cx88[0]: subsystem: 1822:0019, board: digitalnow DNTV Live! DVB-T Pro [card=42]
>cx88[0]/2: cx2388x based dvb card
>DVB: registering new adapter (cx88[0]).
>DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdd1 ...
>md:  adding sdd1 ...
>md:  adding sdc1 ...
>md: sdb1 has different UUID to sdd1
>md: sda1 has different UUID to sdd1
>md: created md1
>md: bind<sdc1>
>md: bind<sdd1>
>md: running: <sdd1><sdc1>
>md: raid1 personality registered for level 1
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sde1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k

Actions: View

Attachments on bug 224680: 151184 | 153069 | 153075 | 153076 | 153077 | 153078