Attachment 151323 Details for Bug 234650 – a record from a normal boot with 2.6.19-1.2911.6.4.fc6 kernel

a record from a normal boot with 2.6.19-1.2911.6.4.fc6 kernel

dmesg.withdma (text/plain), 12.64 KB, created by Michal Jaegermann on 2007-03-30 19:35:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2007-03-30 19:35:17 UTC

Size: 12.64 KB

patch

obsolete

>Linux version 2.6.19-1.2911.6.4.fc6 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 24 14:39:04 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
> BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
> BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>479MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 122864) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   122864
>  HighMem    122864 ->   122864
>early_node_map[1] active PFN ranges
>    0:        0 ->   122864
>On node 0 totalpages: 122864
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 927 pages used for memmap
>  Normal zone: 117841 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP (v000 VT9174                                ) @ 0x000f6620
>ACPI: RSDT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000
>ACPI: FADT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040
>ACPI: DSDT (v001 VT9174 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 20000000 (gap: 1e000000:e1ff0000)
>Detected 999.874 MHz processor.
>Built 1 zonelists.  Total pages: 121905
>Kernel command line: ro root=LABEL=/1 ide=nodma selinux=0
>ide_setup: ide=nodma : Prevented DMA
>No local APIC present or hardware disabled
>mapped APIC to ffffd000 (013e5000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0806000 soft=c07e6000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 480464k/491456k available (2210k kernel code, 10476k reserved, 1131k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xde800000 - 0xff7fe000   ( 527 MB)
>    lowmem  : 0xc0000000 - 0xddff0000   ( 479 MB)
>      .init : 0xc07a5000 - 0xc07e1000   ( 240 kB)
>      .data : 0xc0628a87 - 0xc07438f4   (1131 kB)
>      .text : 0xc0400000 - 0xc0628a87   (2210 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2000.99 BogoMIPS (lpj=1000497)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0381b83f 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
>CPU: L2 Cache: 64K (32 bytes/line)
>CPU: After all inits, caps: 0381b13f 00000000 00000000 00000000 00000000 000000dc 00000000
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0ea0)
>CPU0: Centaur VIA Nehemiah stepping 0a
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 1360k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by vt8235 PM
>PCI quirk: region 0500-050f claimed by vt8235 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x400-0x47f could not be reserved
>pnp: 00:02: ioport range 0x500-0x50f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dc000000-ddffffff
>  PREFETCH window: d8000000-dbffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1174851937.985:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key D40818A2ABA13199
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA CLE266 chipset
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:11.1
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>hdc: CF 2GB, ATA DISK drive
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hdc: max request size: 128KiB
>hdc: 4001760 sectors (2048 MB) w/1KiB Cache, CHS=3970/16/63
> hdc: hdc1
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 415k
>Time: acpi_pm clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>logips2pp: Detected unknown logitech mouse model 1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PS/2 Logitech Mouse as /class/input/input1
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 10, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 7 (level, low) -> IRQ 7
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 7, io base 0x0000dc00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 5, io mem 0xde001000
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>hub 4-0:1.0: over-current change on port 5
>hub 4-0:1.0: over-current change on port 6
>ieee1394: Initialized config rom entry `ip1394'
>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>eth0: VIA Rhine II at 0xde002000, 00:40:63:e9:5a:7f, IRQ 11.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[de000000-de0007ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>input: PC Speaker as /class/input/input2
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040635000085f49]
>NET: Registered protocol family 23
>FDC 0 is a post-1991 82077
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (3839 buckets, 30712 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized via 2.10.0 20060529 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm:via_mem_alloc] *ERROR* Attempt to allocate from uninitialized memory manager.

Actions: View

Attachments on bug 234650: 151322 | 151323 | 151325 | 151393 | 151394