Attachment 151336 Details for Bug 233402 – non-working kernel 2.6.20-1.2938.fc6

non-working kernel 2.6.20-1.2938.fc6

dmesg-2.6.20-1.2938.fc6.log (text/plain), 33.29 KB, created by John Poelstra on 2007-03-30 23:24:37 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: John Poelstra

Created: 2007-03-30 23:24:37 UTC

Size: 33.29 KB

patch

obsolete

>Linux version 2.6.20-1.2938.fc6 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Thu Mar 29 19:26:29 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003fd8ac00 end: 000000003fe8ac00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003fe8ac00 size: 0000000000002000 end: 000000003fe8cc00 type: 4
>copy_e820_map() start: 000000003fe8cc00 size: 0000000000002000 end: 000000003fe8ec00 type: 3
>copy_e820_map() start: 000000003fe8ec00 size: 0000000000171400 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000100400 end: 00000000fed00400 type: 2
>copy_e820_map() start: 00000000fed20000 size: 0000000000080000 end: 00000000feda0000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fe8ac00 (usable)
> BIOS-e820: 000000003fe8ac00 - 000000003fe8cc00 (ACPI NVS)
> BIOS-e820: 000000003fe8cc00 - 000000003fe8ec00 (ACPI data)
> BIOS-e820: 000000003fe8ec00 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261770) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261770
>early_node_map[1] active PFN ranges
>    0:        0 ->   261770
>On node 0 totalpages: 261770
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 316 pages used for memmap
>  HighMem zone: 32078 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 DELL                                  ) @ 0x000febf0
>ACPI: RSDT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcb55
>ACPI: FADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcbb9
>ACPI: SSDT (v001   DELL    st_ex 0x00001000 MSFT 0x0100000d) @ 0xfffc7efe
>ACPI: MADT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcc2d
>ACPI: BOOT (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccd7
>ACPI: ASF! (v016 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fccff
>ACPI: MCFG (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcd66
>ACPI: HPET (v001 DELL    WS 470  0x00000007 ASL  0x00000061) @ 0x000fcda4
>ACPI: DSDT (v001   DELL    dt_ex 0x00001000 MSFT 0x0100000d) @ 0x00000000
>Intel E7520/7320/7525 detected.<6>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] disabled)
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: IOAPIC (id[0x0a] address[0xfec80800] gsi_base[48])
>IOAPIC[2]: apic_id 10, version 32, address 0xfec80800, GSI 48-71
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Detected 2793.242 MHz processor.
>Built 1 zonelists.  Total pages: 259214
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec80000)
>mapped IOAPIC to ffffa000 (fec80800)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029312k/1047080k available (2189k kernel code, 17044k reserved, 1160k data, 236k init, 129576k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623401 - 0xc0745494   (1160 kB)
>      .text : 0xc0400000 - 0xc0623401   (2189 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 5589.14 BogoMIPS (lpj=2794570)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ac000 soft=c078c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5586.06 BogoMIPS (lpj=2793032)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 2/6 eip 3000
>CPU 2 irqstacks, hard=c07ad000 soft=c078d000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5586.04 BogoMIPS (lpj=2793024)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 3/7 eip 3000
>CPU 3 irqstacks, hard=c07ae000 soft=c078e000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5586.07 BogoMIPS (lpj=2793035)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 3
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 01
>Total of 4 processors activated (22347.32 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization across 4 CPUs: passed.
>Brought up 4 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=43,755
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.1: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0170 to 0170
>0000:00:1f.1: trying to change BAR3 from 0374 to 0374
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:05:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x800-0x85f could not be reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:01:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.2
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: d000-dfff
>  MEM window: dfe00000-dfefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: dfd00000-dfdfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: dd000000-dfcfffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>PCI: Setting latency timer of device 0000:01:00.2 to 64
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1487k freed
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1175296395.719:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key AF04636D205A21A3
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:02.0:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:03.0:pcie01 failed with error 2
>Evaluate _OSC Set fails. Status = 0x0005
>Evaluate _OSC Set fails. Status = 0x0005
>aer_init: AER service init fails - Run ACPI _OSC fails
>aer: probe of 0000:00:04.0:pcie01 failed with error 2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:DMA
>Probing IDE interface ide1...
>hdd: HL-DT-ST GCE-8483B, ATAPI CD/DVD-ROM drive
>hdd: hw_config=0000
>hdd: hw_config=0000
>ide1 at 0x170-0x177,0x376 on irq 15
>Probing IDE interface ide0...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 236k freed
>Time: tsc clocksource has been installed.
>Write protecting the kernel read-only data: 841k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 17
>ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 17
>scsi0 : ata_piix
>ata1.00: ATA-6, max UDMA/100, 78125000 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 8
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      HDS722540VLSA80  V31O PQ: 0 ANSI: 5
>SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 78125000 512-byte hdwr sectors (40000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:0:0: Attached scsi disk sdb
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1175296399.612:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1606 types, 175 bools, 1 sens, 1024 cats
>security:  60 classes, 50500 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1175296399.825:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input3
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>iTCO_vendor_support: vendor-support=0
>EDAC MC: Ver: 2.0.1 Mar 29 2007
>gameport: EMU10K1 is pci0000:06:0d.1/gameport0, io 0xccd8, speed 1046kHz
>EDAC e752x: tolm = 40000, remapbase = ffc000, remaplimit = 0
>EDAC MC0: Giving out device to e752x_edac E7525: DEV 0000:00:00.0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>FDC 0 is a post-1991 82077
>Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:03:0e.0[A] -> GSI 48 (level, low) -> IRQ 21
>e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:19:b9:00:74:35
>intel_rng: FWH not detected
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:06:0d.0[A] -> GSI 17 (level, low) -> IRQ 20
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 51065 usecs
>intel8x0: clocking to 48000
>usbcore: registered new interface driver snd-usb-audio
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [VBTN]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>Adding 1020116k swap on /dev/sda2.  Priority:-1 extents:1 across:1020116k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>hdd: DMA timeout retry
>hdd: timeout waiting for DMA
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>BUG: soft lockup detected on CPU#1!
> [<c044ec4f>] softlockup_tick+0xaa/0xc1
> [<c042ef7e>] update_process_times+0x3b/0x5e
> [<c0419d49>] smp_apic_timer_interrupt+0x71/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c04d00d8>] constraint_expr_eval+0x15a/0x3e9
> [<c056e84f>] ide_inb+0x3/0x7
> [<c056f885>] ide_wait_stat+0x98/0xf5
> [<c056da4c>] ide_do_request+0x3de/0x8cb
> [<c044f9c2>] default_enable+0x12/0x1b
> [<c044f97a>] check_irq_resend+0x12/0x48
> [<c044f6d7>] enable_irq+0x92/0xaf
> [<c0573e21>] __ide_dma_test_irq+0x15/0x47
> [<c0573f3f>] __ide_dma_end+0x50/0x74
> [<c0573d33>] __ide_dma_host_off+0x3b/0x41
> [<c056e6d0>] ide_timer_expiry+0x23f/0x254
> [<c056e491>] ide_timer_expiry+0x0/0x254
> [<c042e51b>] run_timer_softirq+0x101/0x164
> [<c043585e>] __rcu_process_callbacks+0xd9/0x15a
> [<c042b7b0>] __do_softirq+0x5d/0xba
> [<c040615b>] do_softirq+0x59/0xb1
> [<c0419d4e>] smp_apic_timer_interrupt+0x76/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c0402280>] mwait_idle_with_hints+0x3b/0x3f
> [<c04023d0>] cpu_idle+0x9e/0xb7
> =======================
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>BUG: soft lockup detected on CPU#1!
> [<c044ec4f>] softlockup_tick+0xaa/0xc1
> [<c042ef7e>] update_process_times+0x3b/0x5e
> [<c0419d49>] smp_apic_timer_interrupt+0x71/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c04d00d8>] constraint_expr_eval+0x15a/0x3e9
> [<c056e84f>] ide_inb+0x3/0x7
> [<c056f885>] ide_wait_stat+0x98/0xf5
> [<c056da4c>] ide_do_request+0x3de/0x8cb
> [<c044f9c2>] default_enable+0x12/0x1b
> [<c044f97a>] check_irq_resend+0x12/0x48
> [<c044f6d7>] enable_irq+0x92/0xaf
> [<c0573e21>] __ide_dma_test_irq+0x15/0x47
> [<c0573f3f>] __ide_dma_end+0x50/0x74
> [<c0573d33>] __ide_dma_host_off+0x3b/0x41
> [<c056e6d0>] ide_timer_expiry+0x23f/0x254
> [<c056e491>] ide_timer_expiry+0x0/0x254
> [<c042e51b>] run_timer_softirq+0x101/0x164
> [<c043585e>] __rcu_process_callbacks+0xd9/0x15a
> [<c042b7b0>] __do_softirq+0x5d/0xba
> [<c040615b>] do_softirq+0x59/0xb1
> [<c0419d4e>] smp_apic_timer_interrupt+0x76/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c0402280>] mwait_idle_with_hints+0x3b/0x3f
> [<c04023d0>] cpu_idle+0x9e/0xb7
> =======================
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>BUG: soft lockup detected on CPU#1!
> [<c044ec4f>] softlockup_tick+0xaa/0xc1
> [<c042ef7e>] update_process_times+0x3b/0x5e
> [<c0419d49>] smp_apic_timer_interrupt+0x71/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c04d00d8>] constraint_expr_eval+0x15a/0x3e9
> [<c056e84f>] ide_inb+0x3/0x7
> [<c056f885>] ide_wait_stat+0x98/0xf5
> [<c056da4c>] ide_do_request+0x3de/0x8cb
> [<c044f9c2>] default_enable+0x12/0x1b
> [<c044f97a>] check_irq_resend+0x12/0x48
> [<c044f6d7>] enable_irq+0x92/0xaf
> [<c0573e21>] __ide_dma_test_irq+0x15/0x47
> [<c0573f3f>] __ide_dma_end+0x50/0x74
> [<c0573d33>] __ide_dma_host_off+0x3b/0x41
> [<c056e6d0>] ide_timer_expiry+0x23f/0x254
> [<c056e491>] ide_timer_expiry+0x0/0x254
> [<c042e51b>] run_timer_softirq+0x101/0x164
> [<c043585e>] __rcu_process_callbacks+0xd9/0x15a
> [<c042b7b0>] __do_softirq+0x5d/0xba
> [<c040615b>] do_softirq+0x59/0xb1
> [<c0419d4e>] smp_apic_timer_interrupt+0x76/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c0402280>] mwait_idle_with_hints+0x3b/0x3f
> [<c04023d0>] cpu_idle+0x9e/0xb7
> =======================
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>BUG: soft lockup detected on CPU#1!
> [<c044ec4f>] softlockup_tick+0xaa/0xc1
> [<c042ef7e>] update_process_times+0x3b/0x5e
> [<c0419d49>] smp_apic_timer_interrupt+0x71/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c04d00d8>] constraint_expr_eval+0x15a/0x3e9
> [<c056e84f>] ide_inb+0x3/0x7
> [<c056f885>] ide_wait_stat+0x98/0xf5
> [<c056da4c>] ide_do_request+0x3de/0x8cb
> [<c044f9c2>] default_enable+0x12/0x1b
> [<c044f97a>] check_irq_resend+0x12/0x48
> [<c044f6d7>] enable_irq+0x92/0xaf
> [<c0573e21>] __ide_dma_test_irq+0x15/0x47
> [<c0573f3f>] __ide_dma_end+0x50/0x74
> [<c0573d33>] __ide_dma_host_off+0x3b/0x41
> [<c056e6d0>] ide_timer_expiry+0x23f/0x254
> [<c056e491>] ide_timer_expiry+0x0/0x254
> [<c042e51b>] run_timer_softirq+0x101/0x164
> [<c043585e>] __rcu_process_callbacks+0xd9/0x15a
> [<c042b7b0>] __do_softirq+0x5d/0xba
> [<c040615b>] do_softirq+0x59/0xb1
> [<c0419d4e>] smp_apic_timer_interrupt+0x76/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c0402280>] mwait_idle_with_hints+0x3b/0x3f
> [<c04023d0>] cpu_idle+0x9e/0xb7
> =======================
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>BUG: soft lockup detected on CPU#1!
> [<c044ec4f>] softlockup_tick+0xaa/0xc1
> [<c042ef7e>] update_process_times+0x3b/0x5e
> [<c0419d49>] smp_apic_timer_interrupt+0x71/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c04d00d8>] constraint_expr_eval+0x15a/0x3e9
> [<c056e84f>] ide_inb+0x3/0x7
> [<c056f885>] ide_wait_stat+0x98/0xf5
> [<c056da4c>] ide_do_request+0x3de/0x8cb
> [<c044f9c2>] default_enable+0x12/0x1b
> [<c044f97a>] check_irq_resend+0x12/0x48
> [<c044f6d7>] enable_irq+0x92/0xaf
> [<c0573e21>] __ide_dma_test_irq+0x15/0x47
> [<c0573f3f>] __ide_dma_end+0x50/0x74
> [<c0573d33>] __ide_dma_host_off+0x3b/0x41
> [<c056e6d0>] ide_timer_expiry+0x23f/0x254
> [<c056e491>] ide_timer_expiry+0x0/0x254
> [<c042e51b>] run_timer_softirq+0x101/0x164
> [<c043585e>] __rcu_process_callbacks+0xd9/0x15a
> [<c042b7b0>] __do_softirq+0x5d/0xba
> [<c040615b>] do_softirq+0x59/0xb1
> [<c0419d4e>] smp_apic_timer_interrupt+0x76/0x80
> [<c04049b0>] apic_timer_interrupt+0x28/0x30
> [<c0402280>] mwait_idle_with_hints+0x3b/0x3f
> [<c04023d0>] cpu_idle+0x9e/0xb7
> =======================
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command
>hdd: status timeout: status=0xd0 { Busy }
>ide: failed opcode was: unknown
>hdd: drive not ready for command

Actions: View

Attachments on bug 233402: 150642 | 151335 | 151336