Attachment 151354 Details for Bug 234713 – output with dmesh with kernel calltrace

output with dmesh with kernel calltrace

dmesg.docked (text/plain), 41.87 KB, created by Bernd Bartmann on 2007-03-31 18:33:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bernd Bartmann

Created: 2007-03-31 18:33:43 UTC

Size: 41.87 KB

patch

obsolete

>Linux version 2.6.20-1.3017.fc7 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 23:00:37 EDT 2007
>Command line: ro root=LABEL=/fc7t1 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f681400 (usable)
> BIOS-e820: 000000007f681400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521857) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000FC070, 0014 (r0 DELL  )
>ACPI: RSDT 7F68198A, 0044 (r1 DELL    M07     27D60C12 ASL        61)
>ACPI: FACP 7F682800, 0074 (r1 DELL    M07     27D60C12 ASL        61)
>ACPI: DSDT 7F683400, 51AC (r1 INT430 SYSFexxx     1001 INTL 20050624)
>ACPI: FACS 7F691C00, 0040
>ACPI: HPET 7F682F00, 0038 (r1 DELL    M07            1 ASL        61)
>ACPI: APIC 7F683000, 0068 (r1 DELL    M07     27D60C12 ASL        47)
>ACPI: ASF! 7F682C00, 005B (r16 DELL    M07     27D60C12 ASL        61)
>ACPI: MCFG 7F682FC0, 003E (r16 DELL    M07     27D60C12 ASL        61)
>ACPI: SLIC 7F68309C, 0176 (r1 DELL    M07     27D60C12 ASL        61)
>ACPI: TCPA 7F683300, 0032 (r1 DELL    M07     27D60C12 ASL        61)
>ACPI: SSDT 7F681A11, 04DC (r1  PmRef    CpuPm     3000 INTL 20050624)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f681000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521857) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f681000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521857
>On node 0 totalpages: 521760
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2362 pages reserved
>  DMA zone: 1549 pages, LIFO batch:0
>  DMA32 zone: 11123 pages used for memmap
>  DMA32 zone: 506638 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 508187
>Kernel command line: ro root=LABEL=/fc7t1 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2163.758 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2026084k/2087428k available (2461k kernel code, 60956k reserved, 1444k data, 332k init)
>Calibrating delay using timer specific routine.. 4331.81 BogoMIPS (lpj=2165907)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10402673
>Detected 10.402 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4327.50 BogoMIPS (lpj=2163754)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=23
>PM: Adding info for No Bus:platform
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Using MMCONFIG at f0000000 - f3ffffff
>ACPI Warning (tbutils-0158): Incorrect checksum in table [TCPA] -  00, should be 93 [20070126]
>ACPI: SSDT 7F6819CE, 0043 (r1  LMPWR  DELLLOM     1001 INTL 20050624)
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:pnp0c14:00
>PM: Adding info for acpi:ACPI0003:00
>PM: Adding info for acpi:PNP0C0A:00
>PM: Adding info for acpi:PNP0C0A:01
>PM: Adding info for acpi:PNP0C0D:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0E:00
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:PNP0C01:01
>PM: Adding info for acpi:PNP0C01:02
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:PNP0F13:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C01:03
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0103:00
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:PNP0401:00
>PM: Adding info for acpi:PNP0C01:04
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:device:18
>PM: Adding info for acpi:device:19
>PM: Adding info for acpi:device:1a
>PM: Adding info for acpi:device:1b
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:device:1c
>PM: Adding info for acpi:device:1d
>PM: Adding info for acpi:device:1e
>PM: Adding info for acpi:device:1f
>PM: Adding info for acpi:bay:00
>PM: Adding info for acpi:device:20
>PM: Adding info for acpi:device:21
>PM: Adding info for acpi:video:00
>PM: Adding info for acpi:device:22
>PM: Adding info for acpi:device:23
>PM: Adding info for acpi:device:24
>PM: Adding info for acpi:device:25
>PM: Adding info for acpi:video:01
>PM: Adding info for acpi:device:26
>PM: Adding info for acpi:device:27
>PM: Adding info for acpi:device:28
>PM: Adding info for acpi:device:29
>PM: Adding info for acpi:video:02
>PM: Adding info for acpi:device:2a
>PM: Adding info for acpi:device:2b
>PM: Adding info for acpi:device:2c
>PM: Adding info for acpi:PNP0C15:00
>PM: Adding info for acpi:device:2d
>PM: Adding info for acpi:device:2e
>PM: Adding info for acpi:device:2f
>PM: Adding info for acpi:device:30
>PM: Adding info for acpi:device:31
>PM: Adding info for acpi:device:32
>PM: Adding info for acpi:device:33
>PM: Adding info for acpi:device:34
>PM: Adding info for acpi:device:35
>PM: Adding info for acpi:device:36
>PM: Adding info for acpi:device:37
>PM: Adding info for acpi:device:38
>PM: Adding info for acpi:device:39
>PM: Adding info for acpi:thermal:00
>PM: Adding info for acpi:thermal:01
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>0000:00:1f.2: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.2: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.2: trying to change BAR2 from 0170 to 0170
>0000:00:1f.2: trying to change BAR3 from 0374 to 0374
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#04) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PXP0._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:02.0
>PM: Adding info for pci:0000:00:02.1
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1c.1
>PM: Adding info for pci:0000:00:1c.2
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:0c:00.0
>PM: Adding info for pci:0000:09:00.0
>PM: Adding info for pci:0000:03:01.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>PM: Adding info for pnp:00:0d
>PM: Adding info for pnp:00:0e
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:00: iomem range 0x0-0x9fbff could not be reserved
>pnp: 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xcffff has been reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff has been reserved
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>Time: hpet clocksource has been installed.
>pnp: 00:02: ioport range 0x1000-0x1005 has been reserved
>pnp: 00:02: ioport range 0x1008-0x100f has been reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0xc80-0xcaf has been reserved
>pnp: 00:08: ioport range 0xcc0-0xcff could not be reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0xcbc-0xcbf has been reserved
>pnp: 00:08: ioport range 0x930-0x97f has been reserved
>pnp: 00:0b: iomem range 0xfed00000-0xfed003ff has been reserved
>pnp: 00:0e: ioport range 0xcb0-0xcbb has been reserved
>pnp: 00:0e: iomem range 0xfed40000-0xfed44fff has been reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: efd00000-efdfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: efc00000-efcfffff
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-2fff
>  MEM window: 8c000000-91ffffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 18 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3020k freed
>PM: Adding info for No Bus:mcelog
>PM: Adding info for No Bus:msr0
>PM: Adding info for No Bus:msr1
>PM: Adding info for No Bus:cpu0
>PM: Adding info for No Bus:cpu1
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1175368408.839:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F3B9BE0EB7EAFE4F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>Allocate Port Service[0000:00:1c.0:pcie03]
>PM: Adding info for pci_express:0000:00:1c.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PM: Adding info for pci_express:0000:00:1c.1:pcie00
>Allocate Port Service[0000:00:1c.1:pcie02]
>PM: Adding info for pci_express:0000:00:1c.1:pcie02
>Allocate Port Service[0000:00:1c.1:pcie03]
>PM: Adding info for pci_express:0000:00:1c.1:pcie03
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>PM: Adding info for pci_express:0000:00:1c.2:pcie00
>Allocate Port Service[0000:00:1c.2:pcie02]
>PM: Adding info for pci_express:0000:00:1c.2:pcie02
>Allocate Port Service[0000:00:1c.2:pcie03]
>PM: Adding info for pci_express:0000:00:1c.2:pcie03
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI: SSDT 7F682138, 0244 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7F681EED, 01C6 (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F68237C, 00C4 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7F6820B3, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (61 C)
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>hpet_resources: 0xfed00000 is busy
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [1028:01c2]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
>pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
>pcmcia: parent PCI bridge Memory window: 0x8c000000 - 0x91ffffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>PM: Adding info for No Bus:pcmcia_socket0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1057k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-2: device descriptor read/all, error -71
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10ac1
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001bfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001bfa8 irq 15
>scsi0 : ata_piix
>PM: Adding info for No Bus:host0
>usb 5-2: new high speed USB device using ehci_hcd and address 2
>ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC74P, max UDMA/100
>ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>PM: Adding info for No Bus:host1
>PM: Adding info for usb:5-2
>PM: Adding info for No Bus:usbdev5.2_ep00
>usb 5-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-2:1.0
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev5.2_ep81
>PM: Adding info for No Bus:usbdev5.2
>ata2.00: ATAPI, max UDMA/33
>usb 5-8: new high speed USB device using ehci_hcd and address 3
>ata2.00: configured for UDMA/33
>PM: Adding info for No Bus:target0:0:0
>PM: Adding info for usb:5-8
>PM: Adding info for No Bus:usbdev5.3_ep00
>usb 5-8: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-8:1.0
>hub 5-8:1.0: USB hub found
>hub 5-8:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev5.3_ep81
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8<7>PM: Adding info for No Bus:usbdev5.3
> sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:target1:0:0
>scsi 1:0:0:0: CD-ROM            Optiarc  DVD+-RW AD-5540A 102C PQ: 0 ANSI: 5
>PM: Adding info for scsi:1:0:0:0
>usb 5-2.3: new full speed USB device using ehci_hcd and address 4
>PM: Adding info for usb:5-2.3
>PM: Adding info for No Bus:usbdev5.4_ep00
>usb 5-2.3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-2.3:1.0
>hub 5-2.3:1.0: USB hub found
>hub 5-2.3:1.0: 3 ports detected
>PM: Adding info for No Bus:usbdev5.4_ep81
>PM: Adding info for No Bus:usbdev5.4
>usb 5-8.1: new full speed USB device using ehci_hcd and address 5
>PM: Adding info for usb:5-8.1
>PM: Adding info for No Bus:usbdev5.5_ep00
>usb 5-8.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-8.1:1.0
>hub 5-8.1:1.0: USB hub found
>hub 5-8.1:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev5.5_ep81
>PM: Adding info for No Bus:usbdev5.5
>usb 5-2.3.2: new full speed USB device using ehci_hcd and address 6
>PM: Adding info for usb:5-2.3.2
>PM: Adding info for No Bus:usbdev5.6_ep00
>usb 5-2.3.2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-2.3.2:1.0
>PM: Adding info for No Bus:usbdev5.6_ep03
>PM: Adding info for No Bus:usbdev5.6_ep82
>PM: Adding info for No Bus:usbdev5.6_ep81
>PM: Adding info for No Bus:usbdev5.6
>usb 5-8.1.1: new low speed USB device using ehci_hcd and address 7
>PM: Adding info for usb:5-8.1.1
>PM: Adding info for No Bus:usbdev5.7_ep00
>usb 5-8.1.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-8.1.1:1.0
>input: Cherry GmbH as /class/input/input4
>input: USB HID v1.11 Keyboard [Cherry GmbH] on usb-0000:00:1d.7-8.1.1
>PM: Adding info for No Bus:usbdev5.7_ep81
>PM: Adding info for No Bus:usbdev5.7
>usb 5-8.1.4: new full speed USB device using ehci_hcd and address 8
>PM: Adding info for usb:5-8.1.4
>PM: Adding info for No Bus:usbdev5.8_ep00
>usb 5-8.1.4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-8.1.4:1.0
>input: Logitech USB Gaming Mouse as /class/input/input5
>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-8.1.4
>PM: Adding info for No Bus:usbdev5.8_ep81
>PM: Adding info for usb:5-8.1.4:1.1
>PM: Adding info for No Bus:hiddev0
>hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.7-8.1.4
>PM: Adding info for No Bus:usbdev5.8_ep82
>PM: Adding info for No Bus:usbdev5.8
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1175368414.818:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats
>security:  60 classes, 63745 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1175368415.152:3): policy loaded auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>Floppy drive(s): fd0 is 1.44M
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>PM: Adding info for No Bus:timer
>input: PC Speaker as /class/input/input6
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>tg3.c:v3.74 (February 20, 2007)
>ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>PM: Adding info for No Bus:eth0
>eth0: Tigon3 [partno(BCM5752KFBG) rev 6002 PHY(5752)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:a6:df:2a
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>iwlwifi: Intel(R) Wireless Link driver for Linux, 0.0.11k
>iwlwifi: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>iwlwifi: Detected Intel PRO/Wireless 3945ABG Network Connection
>PM: Adding info for No Bus:0000:0c:00.0
>intel_rng: FWH not detected
>PM: Adding info for No Bus:seq
>PM: Removing info for No Bus:0000:0c:00.0
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>iwlwifi: iwlwifi-3945.ucode firmware file req failed: Reason -2
>iwlwifi: Could not read microcode from disk: -2
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>
>=========================
>[ BUG: held lock freed! ]
>-------------------------
>modprobe/1133 is freeing memory ffff81007bbb8000-ffff81007bbbffff, with a lock still held there!
> (&priv->mutex){--..}, at: [<ffffffff802622fe>] mutex_lock+0x2a/0x2e
>1 lock held by modprobe/1133:
> #0:  (&priv->mutex){--..}, at: [<ffffffff802622fe>] mutex_lock+0x2a/0x2e
>
>stack backtrace:
>
>Call Trace:
> [<ffffffff802a27ec>] debug_check_no_locks_freed+0xfe/0x12f
> [<ffffffff8020b23d>] kfree+0xb5/0x27e
> [<ffffffff8815d1ca>] :cfg80211:cfg80211_dev_free+0x29/0x2d
> [<ffffffff8020b3f4>] kfree+0x26c/0x27e
> [<ffffffff8815d548>] :cfg80211:wiphy_dev_release+0x10/0x12
> [<ffffffff803b8111>] device_release+0x46/0x8d
> [<ffffffff8034919d>] kobject_cleanup+0x53/0x72
> [<ffffffff803491bc>] kobject_release+0x0/0xf
> [<ffffffff803491c9>] kobject_release+0xd/0xf
> [<ffffffff80235d7d>] kref_put+0x71/0x7d
> [<ffffffff80349148>] kobject_put+0x19/0x1b
> [<ffffffff803b8359>] put_device+0x15/0x17
> [<ffffffff8815d19f>] :cfg80211:wiphy_free+0xd/0xf
> [<ffffffff881da995>] :mac80211:ieee80211_free_hw+0x20/0x25
> [<ffffffff88219031>] :iwlwifi:ipw_pci_probe+0x1645/0x165d
> [<ffffffff8035655f>] pci_device_probe+0xd6/0x13d
> [<ffffffff803bb042>] really_probe+0xd6/0x162
> [<ffffffff803bb17c>] driver_probe_device+0xae/0xba
> [<ffffffff803bb2c8>] __driver_attach+0x93/0xd3
> [<ffffffff803bb235>] __driver_attach+0x0/0xd3
> [<ffffffff803ba445>] bus_for_each_dev+0x49/0x7a
> [<ffffffff803bae78>] driver_attach+0x1c/0x1e
> [<ffffffff803ba7c1>] bus_add_driver+0x78/0x19c
> [<ffffffff803bb54b>] driver_register+0x85/0x89
> [<ffffffff8035677a>] __pci_register_driver+0x95/0xd1
> [<ffffffff881b303f>] :iwlwifi:ipw_init+0x3f/0x8e
> [<ffffffff802a9b0d>] sys_init_module+0x15d6/0x172f
> [<ffffffff881dacd0>] :mac80211:ieee80211_rx_irqsafe+0x0/0x6c
> [<ffffffff80263527>] trace_hardirqs_on_thunk+0x35/0x37
> [<ffffffff8025c11e>] system_call+0x7e/0x83
>
>iwlwifi: probe of 0000:0c:00.0 failed with error -2
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>PM: Adding info for No Bus:i2c-0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:pcmC0D1c
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>PM: Adding info for platform:dock.0
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
>PM: Adding info for platform:bay.0
>ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [SBTN]
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda8, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4273248k swap on /dev/sda6.  Priority:-1 extents:1 across:4273248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:microcode
>PM: Adding info for platform:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Removing info for No Bus:microcode
>PM: Removing info for platform:microcode
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
>PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100506, writing 100106)
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>tg3: eth1: Link is up at 1000 Mbps, full duplex.
>tg3: eth1: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>audit(1175361250.290:4): audit_pid=2367 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>eth1: no IPv6 routers present
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0

Actions: View

Attachments on bug 234713: 151354 | 151355