Attachment 151369 Details for Bug 234733 – Kernel message log (successful boot) with acpi=off

Kernel message log (successful boot) with acpi=off

good.txt (text/plain), 32.08 KB, created by Jacob Thompson on 2007-04-01 02:33:47 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jacob Thompson

Created: 2007-04-01 02:33:47 UTC

Size: 32.08 KB

patch

obsolete

>Linux version 2.6.20-1.3023.fc7 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Sun Mar 25 22:12:02 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007e5e0000 end: 000000007e6e0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007e6e0000 size: 0000000000003000 end: 000000007e6e3000 type: 4
>copy_e820_map() start: 000000007e6e3000 size: 000000000000d000 end: 000000007e6f0000 type: 3
>copy_e820_map() start: 000000007e6f0000 size: 0000000000010000 end: 000000007e700000 type: 2
>copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007e6e0000 (usable)
> BIOS-e820: 000000007e6e0000 - 000000007e6e3000 (ACPI NVS)
> BIOS-e820: 000000007e6e3000 - 000000007e6f0000 (ACPI data)
> BIOS-e820: 000000007e6f0000 - 000000007e700000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3890
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 517856) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   517856
>early_node_map[1] active PFN ranges
>    0:        0 ->   517856
>On node 0 totalpages: 517856
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 3662 pages used for memmap
>  HighMem zone: 284818 pages, LIFO batch:31
>DMI 2.4 present.
>Using APIC driver default
>Intel MultiProcessor Specification v1.4
>    Virtual Wire compatibility mode.
>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
>Processor #0 15:6 APIC version 17
>Processor #1 6:1 APIC version 17
>I/O APIC #4 Version 17 at 0xFEC00000.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Processors: 2
>Allocating PCI resources starting at 80000000 (gap: 7e700000:71900000)
>Built 1 zonelists.  Total pages: 511282
>Kernel command line: ro root=LABEL=/ acpi=off i8042.nomux
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079e000 soft=c077e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3391.769 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2032860k/2071424k available (2145k kernel code, 37268k reserved, 1141k data, 248k init, 1153920k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073b000 - 0xc0779000   ( 248 kB)
>      .data : 0xc06185ed - 0xc0735c94   (1141 kB)
>      .text : 0xc0400000 - 0xc06185ed   (2145 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6787.51 BogoMIPS (lpj=3393756)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000e49d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>CPU0: Intel(R) Pentium(R) D CPU 3.40GHz stepping 05
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c079f000 soft=c077f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6782.11 BogoMIPS (lpj=3391058)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000e49d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D CPU 3.40GHz stepping 05
>Total of 2 processors activated (13569.62 BogoMIPS).
>ExtINT not setup in hardware but reported by MP table
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>migration_cost=691
>PM: Adding info for No Bus:platform
>Time:  2:21:17  Date: 03/01/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>PCI: PCI BIOS revision 3.00 entry at 0xfa3a0, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>Boot video device is 0000:00:02.0
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:02.0
>PM: Adding info for pci:0000:00:03.0
>PM: Adding info for pci:0000:00:03.2
>PM: Adding info for pci:0000:00:03.3
>PM: Adding info for pci:0000:00:19.0
>PM: Adding info for pci:0000:00:1a.0
>PM: Adding info for pci:0000:00:1a.1
>PM: Adding info for pci:0000:00:1a.7
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:00:1f.5
>PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:03.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:03.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:03.3[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:19.0[A] -> IRQ 20
>PCI->APIC IRQ transform: 0000:00:1a.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1a.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:1a.7[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 22
>PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:1f.5[B] -> IRQ 19
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PM: Adding info for No Bus:mem
>Time: tsc clocksource has been installed.
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: c000-cfff
>  MEM window: efb00000-efbfffff
>  PREFETCH window: efa00000-efafffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: efd00000-efdfffff
>  PREFETCH window: efc00000-efcfffff
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3436k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1175394076.753:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 98F5BBBD6BAE5506
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>PM: Adding info for No Bus:pnp0
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Removing info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965Q Chipset.
>agpgart: Unknown page table size, assuming 512KB
>agpgart: Detected 7676K stolen memory.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS2
>0000:00:03.3: ttyS2 at I/O 0xf900 (irq = 17) is a 16550A
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:93:358
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 845k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f700
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000f600
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000f500
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000f400
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000f300
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 128 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xefffc000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb6
>PM: Adding info for No Bus:usbdev6.1_ep00
>usb usb6: configuration #1 chosen from 1 choice
>PM: Adding info for usb:6-0:1.0
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>PM: Adding info for No Bus:usbdev6.1_ep81
>PM: Adding info for No Bus:usbdev6.1
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 16, io mem 0xefffb000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb7
>PM: Adding info for No Bus:usbdev7.1_ep00
>usb usb7: configuration #1 chosen from 1 choice
>PM: Adding info for usb:7-0:1.0
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>PM: Adding info for No Bus:usbdev7.1_ep81
>PM: Adding info for No Bus:usbdev7.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10ac1
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x0001f200 ctl 0x0001f102 bmdma 0x0001ee00 irq 19
>ata2: SATA max UDMA/133 cmd 0x0001f000 ctl 0x0001ef02 bmdma 0x0001ee08 irq 19
>scsi0 : ata_piix
>PM: Adding info for No Bus:host0
>ata1.00: ATA-7: WDC WD2500JS-22MHB0, 02.01C03, max UDMA/133
>ata1.00: 488397168 sectors, multi 16: LBA48 
>ata1.01: ATAPI, max UDMA/100
>ata1.00: configured for UDMA/133
>ata1.01: configured for UDMA/100
>scsi1 : ata_piix
>PM: Adding info for No Bus:host1
>ATA: abnormal status 0x7F on port 0x0001f007
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500JS-22M 02.0 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:target0:0:1
>scsi 0:0:1:0: CD-ROM            LITE-ON  DVDRW SHW-160S6S ORS6 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:1:0
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0x0001eb00 ctl 0x0001ea02 bmdma 0x0001e700 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001e900 ctl 0x0001e802 bmdma 0x0001e708 irq 19
>scsi2 : ata_piix
>PM: Adding info for No Bus:host2
>ATA: abnormal status 0x7F on port 0x0001eb07
>scsi3 : ata_piix
>PM: Adding info for No Bus:host3
>usb 3-1: new low speed USB device using uhci_hcd and address 3
>ATA: abnormal status 0x7F on port 0x0001e907
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>PM: Adding info for usb:3-1
>PM: Adding info for No Bus:usbdev3.3_ep00
>usb 3-1: configuration #1 chosen from 1 choice
>security:  3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats
>security:  60 classes, 63835 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1175394083.209:2): policy loaded auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Adding info for usb:3-1:1.0
>input: LITEON Technology USB Keyboard as /class/input/input1
>input: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:00:1d.0-1
>PM: Adding info for No Bus:usbdev3.3_ep81
>PM: Adding info for usb:3-1:1.1
>input: LITEON Technology USB Keyboard as /class/input/input2
>input: USB HID v1.10 Device [LITEON Technology USB Keyboard] on usb-0000:00:1d.0-1
>PM: Adding info for No Bus:usbdev3.3_ep82
>PM: Adding info for No Bus:usbdev3.3
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>usb 3-2: new low speed USB device using uhci_hcd and address 4
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>PCI: Setting latency timer of device 0000:00:19.0 to 64
>e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:15:58:a4:91:45
>PM: Adding info for No Bus:eth0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>iTCO_vendor_support: vendor-support=0
>input: PC Speaker as /class/input/input3
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH8DO TCO device (Version=2, TCOBASE=0x0460)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>PM: Adding info for No Bus:i2c-0
>PM: Adding info for No Bus:timer
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>FDC 0 is a post-1991 82077
>parport0: PC-style at 0x378 [PCSPP,TRISTATE]
>lp0: using parport0 (polling).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>PM: Adding info for usb:3-2
>PM: Adding info for No Bus:usbdev3.4_ep00
>usb 3-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-2:1.0
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>input: Logitech Optical USB Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2
>PM: Adding info for No Bus:usbdev3.4_ep81
>PM: Adding info for No Bus:usbdev3.4
>PM: Adding info for No Bus:microcode
>PM: Adding info for platform:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Removing info for No Bus:microcode
>PM: Removing info for platform:microcode
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>audit(1175394095.536:3): audit_pid=1414 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>mtrr: no more MTRRs available
>eth0: no IPv6 routers present
>e1000: eth0: e1000_watchdog: NIC Link is Down
>usb 5-2: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for usb:5-2
>PM: Adding info for No Bus:usbdev5.2_ep00
>usb 5-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-2:1.0
>PM: Adding info for No Bus:usbdev5.2_ep81
>PM: Adding info for No Bus:usbdev5.2_ep02
>PM: Adding info for No Bus:usbdev5.2_ep83
>PM: Adding info for No Bus:usbdev5.2
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host4
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>PM: Adding info for No Bus:target4:0:0
>scsi 4:0:0:0: Direct-Access     TEAC     FD-05PUW         3000 PQ: 0 ANSI: 0 CCS
>PM: Adding info for No Bus:target4:0:1
>PM: Removing info for No Bus:target4:0:1
>PM: Adding info for No Bus:target4:0:2
>PM: Removing info for No Bus:target4:0:2
>PM: Adding info for No Bus:target4:0:3
>PM: Removing info for No Bus:target4:0:3
>PM: Adding info for No Bus:target4:0:4
>PM: Removing info for No Bus:target4:0:4
>PM: Adding info for No Bus:target4:0:5
>PM: Removing info for No Bus:target4:0:5
>PM: Adding info for No Bus:target4:0:6
>PM: Removing info for No Bus:target4:0:6
>PM: Adding info for No Bus:target4:0:7
>PM: Removing info for No Bus:target4:0:7
>PM: Adding info for scsi:4:0:0:0
>SCSI device sdb: 2880 512-byte hdwr sectors (1 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 46 94 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 2880 512-byte hdwr sectors (1 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 46 94 00
>sdb: assuming drive cache: write through
> sdb: unknown partition table
>sd 4:0:0:0: Attached scsi removable disk sdb
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
>e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Actions: View

Attachments on bug 234733: 151369 | 151370 | 151371