Attachment 151388 Details for Bug 231687 – dmesg and uname -a

dmesg and uname -a

error_j2llegi.txt (text/plain), 24.82 KB, created by Ivo Sarak on 2007-04-01 13:50:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ivo Sarak

Created: 2007-04-01 13:50:28 UTC

Size: 24.82 KB

patch

obsolete

>Linux version 2.6.20-1.2933.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fed0000 end: 000000007ffd0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007ffd0000 size: 000000000000e000 end: 000000007ffde000 type: 3
>copy_e820_map() start: 000000007ffde000 size: 0000000000022000 end: 0000000080000000 type: 4
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
>copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
> BIOS-e820: 000000007ffd0000 - 000000007ffde000 (ACPI data)
> BIOS-e820: 000000007ffde000 - 0000000080000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524240) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524240
>early_node_map[1] active PFN ranges
>    0:        0 ->   524240
>On node 0 totalpages: 524240
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2879 pages used for memmap
>  HighMem zone: 291985 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000faad0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x05000612 MSFT 0x00000097) @ 0x7ffd0000
>ACPI: FADT (v002 A M I  OEMFACP  0x05000612 MSFT 0x00000097) @ 0x7ffd0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x05000612 MSFT 0x00000097) @ 0x7ffd0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x05000612 MSFT 0x00000097) @ 0x7ffd0400
>ACPI: OEMB (v001 A M I  AMI_OEM  0x05000612 MSFT 0x00000097) @ 0x7ffde040
>ACPI: DSDT (v001  1ADGH 1ADGH000 0x00000000 INTL 0x02002026) @ 0x00000000
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x2008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:11 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:11 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: BIOS IRQ0 pin2 override ignored.
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Detected 2211.389 MHz processor.
>Built 1 zonelists.  Total pages: 519121
>Kernel command line: ro root=/dev/hda3
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07aa000 soft=c078a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2068396k/2096960k available (2188k kernel code, 27272k reserved, 1157k data, 236k init, 1179456k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074a000 - 0xc0785000   ( 236 kB)
>      .data : 0xc0623031 - 0xc0744494   (1157 kB)
>      .text : 0xc0400000 - 0xc0623031   (2188 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4424.75 BogoMIPS (lpj=2212375)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ab000 soft=c078b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4422.04 BogoMIPS (lpj=2211020)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Total of 2 processors activated (8846.79 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: 
>CPU#0 had -180 usecs TSC skew, fixed it up.
>CPU#1 had 180 usecs TSC skew, fixed it up.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=132
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent fixed MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>Error attaching device data
>Error attaching device data
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:04.0: cannot adjust BAR0 (not I/O)
>0000:00:04.0: cannot adjust BAR1 (not I/O)
>0000:00:04.0: cannot adjust BAR2 (not I/O)
>0000:00:04.0: cannot adjust BAR3 (not I/O)
>PCI: Transparent bridge - 0000:00:06.0
>Boot video device is 0000:06:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
>ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0c: ioport range 0xa00-0xa0f has been reserved
>pnp: 00:0c: ioport range 0xa10-0xa1f has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: d000-dfff
>  MEM window: fea00000-feafffff
>  PREFETCH window: 88000000-880fffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0f.0
>  IO window: e000-efff
>  MEM window: feb00000-febfffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1492k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1175258389.719:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A99AD4F3D245F54
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0b.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0e.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0f.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
>NFORCE-MCP55: chipset revision 161
>NFORCE-MCP55: not 100% native mode: will probe irqs later
>NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
>Probing IDE interface ide0...
>hda: SAMSUNG SP2014N, ATA DISK drive
>hdb: ST3300831A, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hda: max request size: 512KiB
>hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>hdb: max request size: 512KiB
>hdb: 586072368 sectors (300069 MB) w/8192KiB Cache, CHS=36481/255/63, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1 hdb2
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4<6>Time: acpi_pm clocksource has been installed.
> S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe9bf000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>input: PS2++ Logitech Wheel Mouse as /class/input/input2
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe9bec00
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:05.0: version 3.2
>ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LSA0] -> GSI 21 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ata1: SATA max UDMA/133 cmd 0xC800 ctl 0xC482 bmdma 0xC000 irq 18
>ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC082 bmdma 0xC008 irq 18
>scsi0 : sata_nv
>ata1: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xC807
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xC407
>ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSA1] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:05.1 to 64
>ata3: SATA max UDMA/133 cmd 0xBC00 ctl 0xB882 bmdma 0xB400 irq 19
>ata4: SATA max UDMA/133 cmd 0xB800 ctl 0xB482 bmdma 0xB408 irq 19
>scsi2 : sata_nv
>ata3: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xBC07
>scsi3 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xB807
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: hda3: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 18038921
>ext3_orphan_cleanup: deleting unreferenced inode 4768162
>EXT3-fs: hda3: 2 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1175258396.036:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input3
>EDAC MC: Ver: 2.0.1 Mar 19 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Linux Tulip driver version 1.1.14 (May 11, 2002)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 20
>tulip0:  MII transceiver #1 config 3100 status 7869 advertising 05e1.
>eth0: ADMtek Comet rev 17 at MMIO 0xfeaffc00, 00:0F:9F:D7:8F:81, IRQ 20.
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2d00
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP]
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2e00
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.1 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on hda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1959920k swap on /dev/hda2.  Priority:-1 extents:1 across:1959920k
>0000:01:00.0: tulip_stop_rxtx() failed
>eth0: Setting full-duplex based on MII#1 link partner capability of cde1.
>audit(1175258419.825:3): audit_pid=1980 old=0 by auid=4294967295
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>i2c /dev entries driver
>BUG: unable to handle kernel paging request at virtual address c06b470a
> printing eip:
>c043eeae
>*pde = 37eee163
>Oops: 0003 [#1]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:06.0/0000:01:00.0/irq
>Modules linked in: i2c_dev snd_via82xx gameport snd_mpu401_uart snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_util_mem snd_hwdep hfsplus hwmon_vid eeprom i2c_isa i2c_viapro hidp l2cap bluetooth ipv6 dm_mirror dm_mod video sbs i2c_ec dock button battery asus_acpi backlight ac lp snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm parport_pc snd_timer snd i2c_nforce2 soundcore k8temp parport tulip i2c_core hwmon k8_edac snd_page_alloc serio_raw edac_mc pcspkr sata_via sata_uli sata_nv libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    1
>EIP:    0060:[<c043eeae>]    Not tainted VLI
>EFLAGS: 00010212   (2.6.20-1.2933.fc6 #1)
>EIP is at module_put+0x16/0x29
>eax: c06b470a   ebx: c252fcd8   ecx: f7e77b80   edx: c06b450a
>esi: f3c148c0   edi: c252f830   ebp: 00000001   esp: e7b03f80
>ds: 007b   es: 007b   ss: 0068
>Process FahCore_78.exe (pid: 13916, ti=e7b03000 task=c252f830 task.ti=e7b03000)
>Stack: c0429caa 394072dc 08369c48 00001000 e7b03fb8 e7b03000 c0406d45 00007200 
>       00000072 00000072 08369c44 e7b03000 c042a120 c0403f64 00000072 00001000 
>       08369c48 00000072 08369c44 bf3fd484 ffffffda 0000007b 0000007b 00000000 
>Call Trace:
> [<c0429caa>] do_exit+0x307/0x6f6
> [<c0406d45>] do_syscall_trace+0xbb/0xc2
> [<c042a120>] complete_and_exit+0x0/0x13
> [<c0403f64>] syscall_call+0x7/0xb
> =======================
>Code: 70 c0 e8 87 ed 0a 00 31 c0 c3 83 c0 04 e8 c3 ec 0a 00 31 c0 c3 85 c0 89 c2 74 22 65 a1 04 00 00 00 c1 e0 07 8d 84 10 80 01 00 00 <ff> 08 83 3a 02 75 0b 8b 82 88 11 00 00 e9 02 38 fe ff c3 56 53 
>EIP: [<c043eeae>] module_put+0x16/0x29 SS:ESP 0068:e7b03f80
> <1>Fixing recursive fault but reboot is needed!
>BUG: unable to handle kernel paging request at virtual address 73c95568
> printing eip:
>c0460805
>*pde = 00000000
>Oops: 0000 [#2]
>SMP 
>last sysfs file: /devices/pci0000:00/0000:00:00.0/irq
>Modules linked in: i2c_dev snd_via82xx gameport snd_mpu401_uart snd_emu10k1 snd_rawmidi snd_ac97_codec ac97_bus snd_util_mem snd_hwdep hfsplus hwmon_vid eeprom i2c_isa i2c_viapro hidp l2cap bluetooth ipv6 dm_mirror dm_mod video sbs i2c_ec dock button battery asus_acpi backlight ac lp snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm parport_pc snd_timer snd i2c_nforce2 soundcore k8temp parport tulip i2c_core hwmon k8_edac snd_page_alloc serio_raw edac_mc pcspkr sata_via sata_uli sata_nv libata sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    0
>EIP:    0060:[<c0460805>]    Not tainted VLI
>EFLAGS: 00010212   (2.6.20-1.2933.fc6 #1)
>EIP is at unmap_vmas+0x11c/0x4f3
>eax: 00000b7c   ebx: c206c808   ecx: 00000000   edx: 73c95540
>esi: b7fae000   edi: 691cd067   ebp: fffacc14   esp: e6c89ef4
>ds: 007b   es: 007b   ss: 0068
>Process zcat (pid: 7309, ti=e6c89000 task=c252b230 task.ti=e6c89000)
>Stack: 00000000 e6da66bc e6c89f58 00000000 00000001 09705000 00000b7c f3c95540 
>       c2414d80 fffffffe 00000000 c206b8ec e6cbe094 0039ae8a b7faf000 00000000 
>       e6c89f58 e6daada0 f3c95540 00000001 c04634aa ffffffff e6c89f54 00000000 
>Call Trace:
> [<c04634aa>] exit_mmap+0x73/0xe9
> [<c04251cc>] mmput+0x34/0x7a
> [<c0429b84>] do_exit+0x1e1/0x6f6
> [<c042a106>] sys_exit_group+0x0/0xd
> [<c0403f64>] syscall_call+0x7/0xb
> =======================
>Code: 00 00 83 3a 00 74 08 8b 4c 24 5c 89 4c 24 3c 3b 74 24 38 72 04 0f 0b eb fe 8b 44 24 04 8b 10 89 f0 c1 e8 16 c1 e0 02 89 44 24 18 <8b> 4a 28 01 c8 89 44 24 18 8d 86 00 00 40 00 8b 4c 24 18 25 00 
>EIP: [<c0460805>] unmap_vmas+0x11c/0x4f3 SS:ESP 0068:e6c89ef4
> <1>Fixing recursive fault but reboot is needed!
>
>
>
>[ivo@ragana ~]$ uname -a
>Linux ragana 2.6.20-1.2933.fc6 #1 SMP Mon Mar 19 11:38:26 EDT 2007 i686
>athlon i386 GNU/Linux
>[ivo@ragana ~]$
>

Actions: View

Attachments on bug 231687: 151388 | 151403