Attachment 151640 Details for Bug 229938 – dmesg

dmesg

app1.dmesg.txt (text/plain), 25.14 KB, created by Ask Bjørn Hansen on 2007-04-04 02:48:59 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ask Bjørn Hansen

Created: 2007-04-04 02:48:59 UTC

Size: 25.14 KB

patch

obsolete

>Linux version 2.6.20-1.2933.fc6xen (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:17:46 EDT 2007
>Command line: ro root=/dev/vg0/vgroot console=ttyS0
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000000f3b57000 (usable)
>Entering add_active_range(0, 0, 998231) 0 entries of 256 used
>end_pfn_map = 998231
>Entering add_active_range(0, 0, 998231) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   998231
>  DMA32      998231 ->   998231
>  Normal     998231 ->   998231
>early_node_map[1] active PFN ranges
>    0:        0 ->   998231
>On node 0 totalpages: 998231
>  DMA zone: 13647 pages used for memmap
>  DMA zone: 1164 pages reserved
>  DMA zone: 983420 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f5990
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x00000000bff63c59
>ACPI: FADT (v001 INTEL  TUMWATER 0x06040000 PTL  0x00000003) @ 0x00000000bff68e48
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x00000000bff68ebc
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x00000000bff68f4c
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x00000000bff68f88
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x00000000bff68fb0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050228) @ 0x00000000bff63c95
>ACPI: DSDT (v001  Intel BLAKFORD 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 3, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
>PERCPU: Allocating 26368 bytes of per cpu data
>Built 1 zonelists.  Total pages: 983420
>Kernel command line: ro root=/dev/vg0/vgroot console=ttyS0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2000.128 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0xffff880005ebe000 - 0xffff880009ebe000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 3830528k/3992924k available (2364k kernel code, 153636k reserved, 1439k data, 196k init)
>Calibrating delay using timer specific routine.. 5002.50 BogoMIPS (lpj=10005012)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Brought up 4 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>Initializing CPU#3
>migration_cost=8946
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>Boot video device is 0000:07:01.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMD0.BPD2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2.BMF3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:02:02.0
>  IO window: 2000-2fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.0
>  IO window: 2000-2fff
>  MEM window: c8200000-c82fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:01:00.3
>  IO window: 3000-3fff
>  MEM window: c8300000-c83fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:00:02.0
>  IO window: 2000-3fff
>  MEM window: c8100000-c83fffff
>  PREFETCH window: c2000000-c20fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: c8400000-c84fffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>PCI: Setting latency timer of device 0000:01:00.3 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 5804k freed
>Simple Boot Flag at 0x38 set to 0x80
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1175564232.740:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key FDEFCFBED0141F2B
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>Allocate Port Service[0000:01:00.0:pcie10]
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:00.0:pcie20]
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:02:02.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:pio, hdb:pio
>Probing IDE interface ide0...
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Write protecting the kernel read-only data: 998k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 17, io mem 0xc8000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  4824.000 MB/sec
>raid5: using function: generic_sse (4824.000 MB/sec)
>raid6: int64x1   1544 MB/s
>raid6: int64x2   2031 MB/s
>raid6: int64x4   1853 MB/s
>raid6: int64x8   1556 MB/s
>raid6: sse2x1    1881 MB/s
>raid6: sse2x2    4291 MB/s
>raid6: sse2x4    5045 MB/s
>raid6: using algorithm sse2x4 (5045 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>PCI: Enabling device 0000:00:1f.2 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x18B0 ctl 0x18A6 bmdma 0x1890 irq 19
>ata2: SATA max UDMA/133 cmd 0x18A8 ctl 0x18A2 bmdma 0x1898 irq 19
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/1)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ATA-7, max UDMA/133, 625142448 sectors: LBA48 NCQ (depth 0/1)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200YS-01P 21.0 PQ: 0 ANSI: 5
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200YS-01P 21.0 PQ: 0 ANSI: 5
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 sdb7 sdb8 >
>sd 1:0:0:0: Attached scsi disk sdb
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb8 ...
>md:  adding sdb8 ...
>md: sdb7 has different UUID to sdb8
>md: sdb6 has different UUID to sdb8
>md: sdb5 has different UUID to sdb8
>md: sdb2 has different UUID to sdb8
>md: sdb1 has different UUID to sdb8
>md:  adding sda8 ...
>md: sda7 has different UUID to sdb8
>md: sda6 has different UUID to sdb8
>md: sda5 has different UUID to sdb8
>md: sda2 has different UUID to sdb8
>md: sda1 has different UUID to sdb8
>md: created md8
>md: bind<sda8>
>md: bind<sdb8>
>md: running: <sdb8><sda8>
>raid1: raid set md8 active with 2 out of 2 mirrors
>md: considering sdb7 ...
>md:  adding sdb7 ...
>md: sdb6 has different UUID to sdb7
>md: sdb5 has different UUID to sdb7
>md: sdb2 has different UUID to sdb7
>md: sdb1 has different UUID to sdb7
>md:  adding sda7 ...
>md: sda6 has different UUID to sdb7
>md: sda5 has different UUID to sdb7
>md: sda2 has different UUID to sdb7
>md: sda1 has different UUID to sdb7
>md: created md7
>md: bind<sda7>
>md: bind<sdb7>
>md: running: <sdb7><sda7>
>raid1: raid set md7 active with 2 out of 2 mirrors
>md: considering sdb6 ...
>md:  adding sdb6 ...
>md: sdb5 has different UUID to sdb6
>md: sdb2 has different UUID to sdb6
>md: sdb1 has different UUID to sdb6
>md:  adding sda6 ...
>md: sda5 has different UUID to sdb6
>md: sda2 has different UUID to sdb6
>md: sda1 has different UUID to sdb6
>md: created md6
>md: bind<sda6>
>md: bind<sdb6>
>md: running: <sdb6><sda6>
>raid1: raid set md6 active with 2 out of 2 mirrors
>md: considering sdb5 ...
>md:  adding sdb5 ...
>md: sdb2 has different UUID to sdb5
>md: sdb1 has different UUID to sdb5
>md:  adding sda5 ...
>md: sda2 has different UUID to sdb5
>md: sda1 has different UUID to sdb5
>md: created md5
>md: bind<sda5>
>md: bind<sdb5>
>md: running: <sdb5><sda5>
>raid1: raid set md5 active with 2 out of 2 mirrors
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda2 ...
>md: sda1 has different UUID to sdb2
>md: created md1
>md: bind<sda2>
>md: bind<sdb2>
>md: running: <sdb2><sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1175564241.688:2): selinux=0 auid=4294967295
>intel_rng: FWH not detected
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>input: PC Speaker as /class/input/input1
>Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:8a:53:ee
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>e1000: 0000:04:00.1: e1000_probe: (PCI Express:2.5Gb/s:Width x4) 00:30:48:8a:53:ef
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 24 (level, low) -> IRQ 24
>e1000: 0000:05:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:d6:ce:6e
>e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 25 (level, low) -> IRQ 25
>e1000: 0000:05:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:04:23:d6:ce:6f
>e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>input: Power Button (FF) as /class/input/input2
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input3
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1048568k swap on /dev/vg0/vgswap.  Priority:-1 extents:1 across:1048568k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>e1000: eth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>e1000: eth1: e1000_watchdog: 10/100 speed: disabling TSO
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>Bridge firewalling registered
>i2c /dev entries driver
>device vif1.0 entered promiscuous mode
>audit(1175564299.675:3): dev=vif1.0 prom=256 old_prom=0 auid=4294967295
>device vif1.1 entered promiscuous mode
>audit(1175564299.675:4): dev=vif1.1 prom=256 old_prom=0 auid=4294967295
>ADDRCONF(NETDEV_UP): vif1.0: link is not ready
>ADDRCONF(NETDEV_UP): vif1.1: link is not ready
>device vif2.0 entered promiscuous mode
>audit(1175564306.972:5): dev=vif2.0 prom=256 old_prom=0 auid=4294967295
>ADDRCONF(NETDEV_UP): vif2.0: link is not ready
>device vif3.0 entered promiscuous mode
>audit(1175564316.342:6): dev=vif3.0 prom=256 old_prom=0 auid=4294967295
>ADDRCONF(NETDEV_UP): vif3.0: link is not ready
>device vif3.1 entered promiscuous mode
>audit(1175564316.362:7): dev=vif3.1 prom=256 old_prom=0 auid=4294967295
>ADDRCONF(NETDEV_UP): vif3.1: link is not ready
>ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
>xenbr0: port 1(vif1.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif1.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif1.1: link becomes ready
>xenbr1: port 1(vif1.1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 1(vif1.1) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
>xenbr0: port 2(vif2.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(vif2.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
>xenbr0: port 3(vif3.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif3.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif3.1: link becomes ready
>xenbr1: port 2(vif3.1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 2(vif3.1) entering forwarding state
>device vif0.0 entered promiscuous mode
>audit(1175564379.757:8): dev=vif0.0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 4(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 4(vif0.0) entering forwarding state
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>e1000: peth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>audit(1175564382.821:9): dev=peth0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 5(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 5(peth0) entering forwarding state
>device vif0.1 entered promiscuous mode
>audit(1175564387.294:10): dev=vif0.1 prom=256 old_prom=0 auid=4294967295
>xenbr1: port 3(vif0.1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 3(vif0.1) entering forwarding state
>ADDRCONF(NETDEV_UP): peth1: link is not ready
>e1000: peth1: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
>e1000: peth1: e1000_watchdog: 10/100 speed: disabling TSO
>ADDRCONF(NETDEV_CHANGE): peth1: link becomes ready
>device peth1 entered promiscuous mode
>audit(1175564389.322:11): dev=peth1 prom=256 old_prom=0 auid=4294967295
>xenbr1: port 4(peth1) entering learning state
>xenbr1: topology change detected, propagating
>xenbr1: port 4(peth1) entering forwarding state
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 229938: 148745 | 151640