Attachment 151786 Details for Bug 235419 – dmesg

dmesg

dmesg (text/plain), 54.32 KB, created by Frederic Poncin on 2007-04-05 17:17:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frederic Poncin

Created: 2007-04-05 17:17:28 UTC

Size: 54.32 KB

patch

obsolete

>Linux version 2.6.20-1.3040.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070327 (Red Hat 4.1.2-7)) #1 SMP Mon Apr 2 17:44:37 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fe74000 end: 000000007ff74000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007ff74000 size: 0000000000002000 end: 000000007ff76000 type: 4
>copy_e820_map() start: 000000007ff76000 size: 0000000000021000 end: 000000007ff97000 type: 3
>copy_e820_map() start: 000000007ff97000 size: 0000000000069000 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fecf0000 size: 0000000000001000 end: 00000000fecf1000 type: 2
>copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ff74000 (usable)
> BIOS-e820: 000000007ff74000 - 000000007ff76000 (ACPI NVS)
> BIOS-e820: 000000007ff76000 - 000000007ff97000 (ACPI data)
> BIOS-e820: 000000007ff97000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524148) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524148
>early_node_map[1] active PFN ranges
>    0:        0 ->   524148
>On node 0 totalpages: 524148
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 3742 pages used for memmap
>  HighMem zone: 291030 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEB90, 0014 (r0 DELL  )
>ACPI: RSDT 000FD1CA, 0034 (r1 DELL    8300           8 ASL        61)
>ACPI: FACP 000FD1FE, 0074 (r1 DELL    8300           8 ASL        61)
>ACPI: DSDT FFFC6E75, 2426 (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 7FF74000, 0040
>ACPI: SSDT FFFC929B, 00A7 (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD272, 006C (r1 DELL    8300           8 ASL        61)
>ACPI: BOOT 000FD2DE, 0028 (r1 DELL    8300           8 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>Built 1 zonelists.  Total pages: 517494
>Kernel command line: ro root=LABEL=/ rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079e000 soft=c077e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2992.723 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2058416k/2096592k available (2147k kernel code, 36916k reserved, 1139k data, 248k init, 1179088k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073b000 - 0xc0779000   ( 248 kB)
>      .data : 0xc0618ffd - 0xc0735cb4   (1139 kB)
>      .text : 0xc0400000 - 0xc0618ffd   (2147 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5988.73 BogoMIPS (lpj=2994365)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000041d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003180 0000041d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
>Total of 1 processors activated (5988.73 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>PM: Adding info for No Bus:platform
>Time: 18:30:52  Date: 03/05/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:PNP0F13:00
>PM: Adding info for acpi:PNP0501:00
>PM: Adding info for acpi:PNP0401:00
>PM: Adding info for acpi:PNP0C01:01
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.1: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0170 to 0170
>0000:00:1f.1: trying to change BAR3 from 0374 to 0374
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:01.0
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.1
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:01:00.0
>PM: Adding info for pci:0000:01:00.1
>PM: Adding info for pci:0000:02:00.0
>PM: Adding info for pci:0000:02:01.0
>PM: Adding info for pci:0000:02:01.1
>PM: Adding info for pci:0000:02:02.0
>PM: Adding info for pci:0000:02:02.1
>PM: Adding info for pci:0000:02:02.2
>PM: Adding info for pci:0000:02:08.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:00: iomem range 0x1000000-0x7ff73fff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
>pnp: 00:0a: ioport range 0x800-0x85f has been reserved
>pnp: 00:0a: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:0a: ioport range 0x860-0x8ff could not be reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fe900000-feafffff
>  PREFETCH window: e8000000-f7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: f8000000-f90fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2802k freed
>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1175797851.362:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1F0F9D4ECD9ADD38
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>PM: Adding info for No Bus:pnp1
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel i875 Chipset.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Removing info for No Bus:ttyS0
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:748:543
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi0 : ata_piix
>PM: Adding info for No Bus:host0
>ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
>ata1.00: 160086528 sectors, multi 8: LBA 
>ata1.01: ATA-4: QUANTUM FIREBALL CR13.0A, A5U.1200, max UDMA/66
>ata1.01: 25429824 sectors, multi 8: LBA 
>ata1.00: configured for UDMA/133
>ata1.01: configured for UDMA/33
>scsi1 : ata_piix
>PM: Adding info for No Bus:host1
>ata2.00: ATAPI, max UDMA/33
>usb 5-3: new high speed USB device using ehci_hcd and address 2
>ata2.00: configured for UDMA/33
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:target0:0:1
>scsi 0:0:1:0: Direct-Access     ATA      QUANTUM FIREBALL A5U. PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:1:0
>SCSI device sdb: 25429824 512-byte hdwr sectors (13020 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 25429824 512-byte hdwr sectors (13020 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:1:0: Attached scsi disk sdb
>PM: Adding info for No Bus:target1:0:0
>scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5
>PM: Adding info for scsi:1:0:0:0
>ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
>ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata3: SATA max UDMA/133 cmd 0x0001fe00 ctl 0x0001fe12 bmdma 0x0001fea0 irq 18
>ata4: SATA max UDMA/133 cmd 0x0001fe20 ctl 0x0001fe32 bmdma 0x0001fea8 irq 18
>scsi2 : ata_piix
>PM: Adding info for No Bus:host2
>PM: Adding info for usb:5-3
>PM: Adding info for No Bus:usbdev5.2_ep00
>usb 5-3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-3:1.0
>hub 5-3:1.0: USB hub found
>hub 5-3:1.0: 7 ports detected
>PM: Adding info for No Bus:usbdev5.2_ep81
>PM: Adding info for No Bus:usbdev5.2
>ata3.00: ATA-6: ST3120026AS, 8.05, max UDMA/133
>ata3.00: 234375000 sectors, multi 8: LBA48 
>ata3.00: configured for UDMA/133
>scsi3 : ata_piix
>PM: Adding info for No Bus:host3
>usb 5-4: new high speed USB device using ehci_hcd and address 3
>ata4.00: ATA-6: WDC WD2000JD-00GBB0, 02.05D02, max UDMA/100
>ata4.00: 390721968 sectors, multi 8: LBA48 
>ata4.00: applying bridge limits
>ata4.00: configured for UDMA/100
>PM: Adding info for No Bus:target2:0:0
>scsi 2:0:0:0: Direct-Access     ATA      ST3120026AS      8.05 PQ: 0 ANSI: 5
>PM: Adding info for scsi:2:0:0:0
>SCSI device sdc: 234375000 512-byte hdwr sectors (120000 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 234375000 512-byte hdwr sectors (120000 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2 sdc3 sdc4 <<7>PM: Adding info for usb:5-4
>PM: Adding info for No Bus:usbdev5.3_ep00
>usb 5-4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-4:1.0
>PM: Adding info for No Bus:usbdev5.3
> sdc5 >
>sd 2:0:0:0: Attached scsi disk sdc
>PM: Adding info for No Bus:target3:0:0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2000JD-00G 02.0 PQ: 0 ANSI: 5
>PM: Adding info for scsi:3:0:0:0
>SCSI device sdd: 390721968 512-byte hdwr sectors (200050 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 390721968 512-byte hdwr sectors (200050 MB)
>sdd: Write Protect is off
>sdd: Mode Sense: 00 3a 00 00
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1 sdd2
>sd 3:0:0:0: Attached scsi disk sdd
>usb 5-5: new high speed USB device using ehci_hcd and address 4
>PM: Adding info for usb:5-5
>PM: Adding info for No Bus:usbdev5.4_ep00
>usb 5-5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-5:1.0
>PM: Adding info for No Bus:usbdev5.4_ep01
>PM: Adding info for No Bus:usbdev5.4_ep82
>PM: Adding info for No Bus:usbdev5.4
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-6: new high speed USB device using ehci_hcd and address 5
>PM: Adding info for usb:5-6
>PM: Adding info for No Bus:usbdev5.5_ep00
>usb 5-6: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6:1.0
>hub 5-6:1.0: USB hub found
>hub 5-6:1.0: 7 ports detected
>PM: Adding info for No Bus:usbdev5.5_ep81
>PM: Adding info for No Bus:usbdev5.5
>usb 5-7: new high speed USB device using ehci_hcd and address 6
>PM: Adding info for usb:5-7
>PM: Adding info for No Bus:usbdev5.6_ep00
>usb 5-7: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-7:1.0
>PM: Adding info for No Bus:usbdev5.6_ep02
>PM: Adding info for No Bus:usbdev5.6_ep88
>PM: Adding info for No Bus:usbdev5.6
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-8: new high speed USB device using ehci_hcd and address 7
>Initializing USB Mass Storage driver...
>PM: Adding info for usb:5-8
>PM: Adding info for No Bus:usbdev5.7_ep00
>usb 5-8: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-8:1.0
>PM: Adding info for No Bus:usbdev5.7_ep02
>PM: Adding info for No Bus:usbdev5.7_ep88
>PM: Adding info for No Bus:usbdev5.7
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 5-3.3: new full speed USB device using ehci_hcd and address 8
>PM: Adding info for usb:5-3.3
>PM: Adding info for No Bus:usbdev5.8_ep00
>usb 5-3.3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-3.3:1.0
>PM: Adding info for No Bus:usbdev5.8_ep81
>PM: Adding info for No Bus:usbdev5.8_ep82
>PM: Adding info for No Bus:usbdev5.8
>hub 5-3:1.0: hub_port_status failed (err = -71)
>usb 5-3.7: new low speed USB device using ehci_hcd and address 9
>PM: Adding info for usb:5-3.7
>PM: Adding info for No Bus:usbdev5.9_ep00
>usb 5-3.7: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-3.7:1.0
>PM: Adding info for No Bus:usbdev5.9_ep81
>PM: Adding info for No Bus:usbdev5.9
>scsi4 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host4
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>usb 5-6.3: new full speed USB device using ehci_hcd and address 10
>PM: Adding info for usb:5-6.3
>PM: Adding info for No Bus:usbdev5.10_ep00
>usb 5-6.3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6.3:1.0
>hub 5-6.3:1.0: USB hub found
>hub 5-6.3:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev5.10_ep81
>PM: Adding info for No Bus:usbdev5.10
>scsi5 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host5
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi6 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host6
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>usb 5-6.3.1: new low speed USB device using ehci_hcd and address 11
>PM: Adding info for usb:5-6.3.1
>PM: Adding info for No Bus:usbdev5.11_ep00
>usb 5-6.3.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6.3.1:1.0
>input: Logitech USB Receiver as /class/input/input3
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-6.3.1
>PM: Adding info for No Bus:usbdev5.11_ep81
>PM: Adding info for usb:5-6.3.1:1.1
>input: Logitech USB Receiver as /class/input/input4
>PM: Adding info for No Bus:hiddev0
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-6.3.1
>PM: Adding info for No Bus:usbdev5.11_ep82
>PM: Adding info for No Bus:usbdev5.11
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>PM: Adding info for No Bus:target4:0:0
>usb-storage: device scan complete
>PM: Adding info for No Bus:target5:0:0
>usb-storage: device scan complete
>PM: Adding info for No Bus:target6:0:0
>scsi 5:0:0:0: Direct-Access     ST340083 2A                    PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target5:0:1
>PM: Removing info for No Bus:target5:0:1
>PM: Adding info for No Bus:target5:0:2
>PM: Removing info for No Bus:target5:0:2
>PM: Adding info for No Bus:target5:0:3
>PM: Removing info for No Bus:target5:0:3
>PM: Adding info for No Bus:target5:0:4
>scsi 6:0:0:0: Direct-Access     ST340083 2A                    PQ: 0 ANSI: 0
>PM: Removing info for No Bus:target5:0:4
>PM: Adding info for No Bus:target5:0:5
>PM: Adding info for No Bus:target6:0:1
>PM: Removing info for No Bus:target5:0:5
>PM: Adding info for No Bus:target5:0:6
>PM: Removing info for No Bus:target6:0:1
>PM: Adding info for No Bus:target6:0:2
>PM: Removing info for No Bus:target5:0:6
>PM: Adding info for No Bus:target5:0:7
>PM: Removing info for No Bus:target6:0:2
>PM: Adding info for No Bus:target6:0:3
>PM: Removing info for No Bus:target5:0:7
>PM: Removing info for No Bus:target6:0:3
>PM: Adding info for No Bus:target6:0:4
>PM: Removing info for No Bus:target6:0:4
>PM: Adding info for No Bus:target6:0:5
>PM: Removing info for No Bus:target6:0:5
>PM: Adding info for No Bus:target6:0:6
>PM: Removing info for No Bus:target6:0:6
>PM: Adding info for No Bus:target6:0:7
>PM: Removing info for No Bus:target6:0:7
>scsi 4:0:0:0: Direct-Access     ST340083 2A               3.03 PQ: 0 ANSI: 0
>PM: Adding info for No Bus:target4:0:1
>PM: Removing info for No Bus:target4:0:1
>PM: Adding info for No Bus:target4:0:2
>PM: Removing info for No Bus:target4:0:2
>PM: Adding info for No Bus:target4:0:3
>PM: Removing info for No Bus:target4:0:3
>PM: Adding info for No Bus:target4:0:4
>PM: Removing info for No Bus:target4:0:4
>PM: Adding info for No Bus:target4:0:5
>PM: Removing info for No Bus:target4:0:5
>PM: Adding info for No Bus:target4:0:6
>PM: Removing info for No Bus:target4:0:6
>PM: Adding info for No Bus:target4:0:7
>PM: Removing info for No Bus:target4:0:7
>PM: Adding info for scsi:4:0:0:0
>SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB)
>sde: Write Protect is off
>sde: Mode Sense: 10 00 00 00
>sde: assuming drive cache: write through
>SCSI device sde: 781422768 512-byte hdwr sectors (400088 MB)
>sde: Write Protect is off
>sde: Mode Sense: 10 00 00 00
>sde: assuming drive cache: write through
> sde: sde1
>sd 4:0:0:0: Attached scsi disk sde
>PM: Adding info for scsi:5:0:0:0
>SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 33 00 00 00
>sdf: assuming drive cache: write through
>SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB)
>sdf: Write Protect is off
>sdf: Mode Sense: 33 00 00 00
>sdf: assuming drive cache: write through
> sdf: sdf1
>sd 5:0:0:0: Attached scsi disk sdf
>PM: Adding info for scsi:6:0:0:0
>SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 33 00 00 00
>sdg: assuming drive cache: write through
>SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB)
>sdg: Write Protect is off
>sdg: Mode Sense: 33 00 00 00
>sdg: assuming drive cache: write through
> sdg: sdg1
>sd 6:0:0:0: Attached scsi disk sdg
>usb 5-5: reset high speed USB device using ehci_hcd and address 4
>PM: Removing info for No Bus:usbdev5.4_ep01
>PM: Removing info for No Bus:usbdev5.4_ep82
>PM: Adding info for No Bus:usbdev5.4_ep01
>PM: Adding info for No Bus:usbdev5.4_ep82
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1781 types, 82 bools, 1 sens, 1024 cats
>security:  60 classes, 64122 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sdc2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1175797904.354:2): policy loaded auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>scsi 1:0:0:0: Attached scsi generic sg2 type 5
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>sd 3:0:0:0: Attached scsi generic sg4 type 0
>sd 4:0:0:0: Attached scsi generic sg5 type 0
>sd 5:0:0:0: Attached scsi generic sg6 type 0
>sd 6:0:0:0: Attached scsi generic sg7 type 0
>sr0: scsi3-mmc drive: 20x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>EDAC MC: Ver: 2.0.1 Apr  2 2007
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>PM: Adding info for No Bus:i2c-0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>PM: Adding info for platform:iTCO_wdt
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>PM: Adding info for No Bus:watchdog
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>EDAC i82875p: i82875p init one
>PM: Adding info for pci:0000:00:06.0
>PCI: Unable to reserve mem region #1:1000@fecf0000 for device 0000:00:06.0
>EDAC MC0: Giving out device to i82875p_edac i82875p: DEV 0000:00:00.0
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:05 failed with error -16
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:02:02.2[B] -> GSI 18 (level, low) -> IRQ 18
>fw_ohci: Added fw-ohci device 0000:02:02.2, OHCI version 1.10
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>PM: Adding info for No Bus:eth0
>e100: eth0: e100_probe: addr 0xfe8fb000, irq 21, MAC addr 00:0C:F1:B4:07:19
>PM: Adding info for No Bus:timer
>Linux video capture interface: v2.00
>PM: Adding info for No Bus:seq
>gameport: EMU10K1 is pci0000:02:02.1/gameport0, io 0xcef8, speed 1104kHz
>PM: Adding info for gameport:gameport0
>PM: Adding info for firewire:fw0
>fw_core: created new fw device fw0 (0 config rom retries)
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 20
>bttv: driver version 0.9.17 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in cold state, will try to load a firmware
>PM: Adding info for No Bus:5-4
>Installing spdif_bug patch: Audigy 2 ZS [SB0350]
>PM: Adding info for No Bus:hwC0D0
>PM: Adding info for No Bus:midiC0D1
>PM: Adding info for No Bus:amidi
>PM: Adding info for No Bus:admmidi
>PM: Adding info for No Bus:midiC0D0
>PM: Adding info for No Bus:midi
>PM: Adding info for No Bus:dmmidi
>PM: Adding info for No Bus:pcmC0D4p
>PM: Adding info for No Bus:pcmC0D4c
>PM: Adding info for No Bus:pcmC0D3p
>PM: Adding info for ac97:0-0:STAC9750,51
>PM: Adding info for No Bus:pcmC0D2p
>PM: Adding info for No Bus:pcmC0D2c
>PM: Adding info for No Bus:pcmC0D1c
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 22 (level, low) -> IRQ 22
>bttv0: Bt878 (rev 2) at 0000:02:01.0, irq: 22, latency: 64, mmio: 0xf9001000
>bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
>bttv0: using: Hauppauge (bt878) [card=10,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00fffffb [init]
>bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
>PM: Adding info for No Bus:i2c-1
>PM: Adding info for i2c:1-0050
>tveeprom 1-0050: Hauppauge model 61294, rev B408, serial# 3309408
>tveeprom 1-0050: tuner model is Philips FI1216 MK2 (idx 8, type 5)
>tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
>tveeprom 1-0050: audio processor is None (idx 0)
>tveeprom 1-0050: has radio
>bttv0: Hauppauge eeprom indicates model#61294
>bttv0: using tuner=5
>bttv0: i2c: checking for MSP34xx @ 0x80... not found
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>bttv0: i2c: checking for TDA9887 @ 0x86... not found
>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
>PM: Adding info for i2c:1-0061
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bttv0: PLL: 28636363 => 35468950 .. ok
>PM: Adding info for No Bus:hwC0D2
>PM: Adding info for No Bus:midiC0D2
>PM: Adding info for No Bus:midiC0D3
>ACPI: PCI Interrupt 0000:02:01.1[A] -> GSI 22 (level, low) -> IRQ 22
>PM: Adding info for No Bus:pcmC1D1c
>PM: Adding info for No Bus:adsp1
>PM: Adding info for No Bus:pcmC1D0c
>PM: Adding info for No Bus:dsp1
>PM: Adding info for No Bus:audio1
>PM: Adding info for No Bus:controlC1
>PM: Adding info for No Bus:mixer1
>bt878: AUDIO driver version 0.0.0 loaded
>PM: Removing info for No Bus:5-4
>dvb-usb: downloading firmware from file 'dvb-usb-wt220u-02.fw'
>dvb-usb: could not stop the USB controller CPU.
>dvb-usb: error while transferring firmware (transferred size: -71, block size: 3)
>dvb-usb: firmware download failed at 22 with -22
>usbcore: registered new interface driver dvb_usb_dtt200u
>usb 5-5: reset high speed USB device using ehci_hcd and address 4
>PM: Removing info for No Bus:usbdev5.4_ep01
>PM: Removing info for No Bus:usbdev5.4_ep82
>PM: Adding info for No Bus:usbdev5.4_ep01
>PM: Adding info for No Bus:usbdev5.4_ep82
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>usb 5-5: reset high speed USB device using ehci_hcd and address 4
>PM: Removing info for No Bus:usbdev5.4_ep01
>PM: Removing info for No Bus:usbdev5.4_ep82
>PM: Adding info for No Bus:usbdev5.4_ep01
>PM: Adding info for No Bus:usbdev5.4_ep82
>EXT3 FS on sdc2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc5, type ext3), uses xattr
>ReiserFS: sdd2: found reiserfs format "3.6" with standard journal
>ReiserFS: sdd2: using ordered data mode
>ReiserFS: sdd2: journal params: device sdd2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: sdd2: checking transaction log (sdd2)
>ReiserFS: sdd2: Using r5 hash to sort names
>audit(1175790823.394:3): avc:  denied  { search } for  pid=1602 comm="mount" name="/" dev=sdd2 ino=2 scontext=system_u:system_r:mount_t:s0 tcontext=system_u:object_r:unlabeled_t:s0 tclass=dir
>SELinux: initialized (dev sdd2, type reiserfs), uses genfs_contexts
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>Adding 4096564k swap on /dev/sdc3.  Priority:-1 extents:1 across:4096564k
>Adding 3911788k swap on /dev/sdd1.  Priority:-2 extents:1 across:3911788k
>Adding 2048216k swap on /dev/sda1.  Priority:-3 extents:1 across:2048216k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>PM: Adding info for No Bus:microcode
>PM: Adding info for platform:microcode
>PM: Adding info for No Bus:microcode
>PM: Removing info for No Bus:microcode
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>PM: Removing info for No Bus:microcode
>PM: Removing info for platform:microcode
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>audit(1175790835.892:4): audit_pid=2244 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>PM: Adding info for platform:bluetooth
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>BUG: warning at drivers/hid/hid-core.c:778/implement() (Not tainted)
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c05a3827>] hid_output_report+0x205/0x2a1
> [<c05838d8>] hid_submit_ctrl+0x57/0x1cf
> [<c0583b95>] usbhid_submit_report+0x145/0x168
> [<c058596b>] hiddev_ioctl+0x360/0x8d1
> [<c0488b30>] do_ioctl+0x50/0x67
> [<c0488d99>] vfs_ioctl+0x252/0x265
> [<c0488df5>] sys_ioctl+0x49/0x64
> [<c0405078>] syscall_call+0x7/0xb
> =======================
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 5-6.3.2: new full speed USB device using ehci_hcd and address 12
>PM: Adding info for usb:5-6.3.2
>PM: Adding info for No Bus:usbdev5.12_ep00
>usb 5-6.3.2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6.3.2:1.0
>PM: Adding info for No Bus:usbdev5.12_ep81
>PM: Adding info for No Bus:usbdev5.12_ep02
>PM: Adding info for No Bus:usbdev5.12_ep82
>PM: Adding info for usb:5-6.3.2:1.1
>PM: Adding info for No Bus:usbdev5.12_ep03
>PM: Adding info for No Bus:usbdev5.12_ep83
>PM: Adding info for usb:5-6.3.2:1.2
>PM: Adding info for No Bus:usbdev5.12
>Bluetooth: HCI USB driver ver 2.9
>PM: Removing info for No Bus:usbdev5.12_ep03
>PM: Removing info for No Bus:usbdev5.12_ep83
>PM: Adding info for No Bus:usbdev5.12_ep03
>PM: Adding info for No Bus:usbdev5.12_ep83
>PM: Adding info for No Bus:hci0
>usbcore: registered new interface driver hci_usb
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Removing info for No Bus:vcs4
>PM: Removing info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts
>usb 5-3.3: USB disconnect, address 8
>PM: Removing info for No Bus:usbdev5.8_ep81
>PM: Removing info for No Bus:usbdev5.8_ep82
>PM: Removing info for usb:5-3.3:1.0
>PM: Removing info for No Bus:usbdev5.8
>PM: Removing info for No Bus:usbdev5.8_ep00
>PM: Removing info for usb:5-3.3
>usb 5-3.7: USB disconnect, address 9
>PM: Removing info for No Bus:usbdev5.9_ep81
>PM: Removing info for usb:5-3.7:1.0
>PM: Removing info for No Bus:usbdev5.9
>PM: Removing info for No Bus:usbdev5.9_ep00
>PM: Removing info for usb:5-3.7
>Clocksource tsc unstable (delta = 4687052468 ns)
>Time: acpi_pm clocksource has been installed.
>PM: Adding info for bluetooth:acl00076112C413
>usb 5-6.3: USB disconnect, address 10
>usb 5-6.3.1: USB disconnect, address 11
>PM: Removing info for No Bus:usbdev5.11_ep81
>PM: Removing info for usb:5-6.3.1:1.0
>PM: Removing info for No Bus:usbdev5.11_ep82
>PM: Removing info for No Bus:hiddev0
>PM: Removing info for usb:5-6.3.1:1.1
>PM: Removing info for No Bus:usbdev5.11
>PM: Removing info for No Bus:usbdev5.11_ep00
>PM: Removing info for usb:5-6.3.1
>usb 5-6.3.2: USB disconnect, address 12
>PM: Removing info for No Bus:usbdev5.12_ep81
>PM: Removing info for No Bus:usbdev5.12_ep02
>PM: Removing info for No Bus:usbdev5.12_ep82
>PM: Removing info for No Bus:hci0
>PM: Removing info for bluetooth:acl00076112C413
>PM: Removing info for usb:5-6.3.2:1.0
>PM: Removing info for No Bus:usbdev5.12_ep03
>PM: Removing info for No Bus:usbdev5.12_ep83
>PM: Removing info for usb:5-6.3.2:1.1
>PM: Removing info for usb:5-6.3.2:1.2
>PM: Removing info for No Bus:usbdev5.12
>PM: Removing info for No Bus:usbdev5.12_ep00
>PM: Removing info for usb:5-6.3.2
>PM: Removing info for No Bus:usbdev5.10_ep81
>PM: Removing info for usb:5-6.3:1.0
>PM: Removing info for No Bus:usbdev5.10
>PM: Removing info for No Bus:usbdev5.10_ep00
>PM: Removing info for usb:5-6.3
>usb 5-6.3: new full speed USB device using ehci_hcd and address 13
>PM: Adding info for usb:5-6.3
>PM: Adding info for No Bus:usbdev5.13_ep00
>usb 5-6.3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6.3:1.0
>hub 5-6.3:1.0: USB hub found
>hub 5-6.3:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev5.13_ep81
>PM: Adding info for No Bus:usbdev5.13
>usb 5-6.3.1: new low speed USB device using ehci_hcd and address 14
>PM: Adding info for usb:5-6.3.1
>PM: Adding info for No Bus:usbdev5.14_ep00
>usb 5-6.3.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-6.3.1:1.0
>input: Logitech USB Receiver as /class/input/input8
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.7-6.3.1
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Adding info for usb:5-6.3.1:1.1
>input: Logitech USB Receiver as /class/input/input9
>PM: Adding info for No Bus:hiddev0
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.7-6.3.1
>PM: Adding info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>security:  3 users, 6 roles, 1783 types, 82 bools, 1 sens, 1024 cats
>security:  60 classes, 64211 rules
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82
>usb 5-6.3.1: reset low speed USB device using ehci_hcd and address 14
>PM: Removing info for No Bus:usbdev5.14_ep81
>PM: Adding info for No Bus:usbdev5.14_ep81
>PM: Removing info for No Bus:usbdev5.14_ep82
>PM: Adding info for No Bus:usbdev5.14_ep82

Actions: View

Attachments on bug 235419: 151786