Attachment 151892 Details for Bug 235522 – dmseg after good boot.

dmseg after good boot.

dmseg (text/plain), 31.59 KB, created by David Robertson on 2007-04-06 17:54:56 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Robertson

Created: 2007-04-06 17:54:56 UTC

Size: 31.59 KB

patch

obsolete

>Linux version 2.6.20-1.3040.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070327 (Red Hat 4.1.2-7)) #1 SMP Mon Apr 2 17:44:37 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000d2000 size: 000000000002e000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007be00000 end: 000000007bf00000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007bf00000 size: 0000000000017000 end: 000000007bf17000 type: 3
>copy_e820_map() start: 000000007bf17000 size: 0000000000069000 end: 000000007bf80000 type: 4
>copy_e820_map() start: 000000007bf80000 size: 0000000004080000 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
>BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
>BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
>BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
>BIOS-e820: 0000000000100000 - 000000007bf00000 (usable)
>BIOS-e820: 000000007bf00000 - 000000007bf17000 (ACPI data)
>BIOS-e820: 000000007bf17000 - 000000007bf80000 (ACPI NVS)
>BIOS-e820: 000000007bf80000 - 0000000080000000 (reserved)
>BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>1087MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f8960
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 507648) 0 entries of 256 used
>Zone PFN ranges:
> DMA             0 ->     4096
> Normal       4096 ->   229376
> HighMem    229376 ->   507648
>early_node_map[1] active PFN ranges
>   0:        0 ->   507648
>On node 0 totalpages: 507648
> DMA zone: 52 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4044 pages, LIFO batch:0
> Normal zone: 2860 pages used for memmap
> Normal zone: 222420 pages, LIFO batch:31
> HighMem zone: 3532 pages used for memmap
> HighMem zone: 274740 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F8930, 0014 (r0 HP    )
>ACPI: RSDT 7BF0DC8C, 0040 (r1 HPQOEM SLIC-MPC  6040000  LTP        0)
>ACPI: FACP 7BF16B58, 0074 (r1 HP     MCP51M    6040000 PTL_    F4240)
>ACPI: DSDT 7BF0DCCC, 8E8C (r1 HP       MCP51M  6040000 MSFT  3000000)
>ACPI: FACS 7BF17FC0, 0040
>ACPI: SSDT 7BF16BCC, 01C4 (r1 HP     POWERNOW  6040000  LTP        1)
>ACPI: MCFG 7BF16D90, 003C (r1 HP       MCFG    6040000  LTP        0)
>ACPI: HPET 7BF16DCC, 0038 (r1 PTLTD  HPETTBL   6040000  LTP        1)
>ACPI: APIC 7BF16E04, 005E (r1 HP                       APIC    6040000  LTP        0)
>ACPI: BOOT 7BF16E62, 0028 (r1     HP $SBFTBL$  6040000  LTP        1)
>ACPI: SLIC 7BF16E8A, 0176 (r1 HPQOEM SLIC-MPC  6040000  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:8 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:8 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x10de8201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Built 1 zonelists.  Total pages: 501204
>Kernel command line: ro root=LABEL=/
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079e000 soft=c077e000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1808.298 MHz processor.
>spurious 8259A interrupt: IRQ7.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
>memory used by lock dependency info: 1096 kB
>per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1992568k/2030592k available (2147k kernel code, 36752k reserved, 1139k data, 248k init, 1113088k highmem)
>virtual kernel memory layout:
>   fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>   vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>   lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>     .init : 0xc073b000 - 0xc0779000   ( 248 kB)
>     .data : 0xc0618ffd - 0xc0735cb4   (1139 kB)
>     .text : 0xc0400000 - 0xc0618ffd   (2147 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>Calibrating delay using timer specific routine.. 3619.40 BogoMIPS (lpj=1809701)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0(2) -> Core 0
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c079f000 soft=c077f000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3616.35 BogoMIPS (lpj=1808177)
>CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1(2) -> Core 1
>CPU: After all inits, caps: 178bf3ff ebd3fbff 00000000 00000410 00002001 00000000 0000001f
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Turion(tm) 64 X2 Mobile Technology TL-56 stepping 02
>Total of 2 processors activated (7235.75 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>migration_cost=1000
>PM: Adding info for No Bus:platform
>Time:  6:27:28  Date: 03/06/107
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on device 00:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0C0E:00
>PM: Adding info for acpi:ACPI0003:00
>PM: Adding info for acpi:PNP0C0A:00
>PM: Adding info for acpi:PNP0C0D:00
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:HPQ0006:00
>PM: Adding info for acpi:PNP0C14:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:PNP0C02:01
>PM: Adding info for acpi:PNP0C02:02
>PM: Adding info for acpi:PNP0C02:03
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0103:00
>PM: Adding info for acpi:PNP0303:00
>PM: Adding info for acpi:SYN0129:00
>PM: Adding info for acpi:PNP0C09:00
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:device:0c
>PM: Adding info for acpi:device:0d
>PM: Adding info for acpi:device:0e
>PM: Adding info for acpi:device:0f
>PM: Adding info for acpi:device:10
>PM: Adding info for acpi:device:11
>PM: Adding info for acpi:device:12
>PM: Adding info for acpi:device:13
>PM: Adding info for acpi:device:14
>PM: Adding info for acpi:device:15
>PM: Adding info for acpi:device:16
>PM: Adding info for acpi:device:17
>PM: Adding info for acpi:device:18
>PM: Adding info for acpi:device:19
>PM: Adding info for acpi:device:1a
>PM: Adding info for acpi:device:1b
>PM: Adding info for acpi:device:1c
>PM: Adding info for acpi:device:1d
>PM: Adding info for acpi:device:1e
>PM: Adding info for acpi:device:1f
>PM: Adding info for acpi:device:20
>PM: Adding info for acpi:device:21
>PM: Adding info for acpi:video:00
>PM: Adding info for acpi:device:22
>PM: Adding info for acpi:device:23
>PM: Adding info for acpi:device:24
>PM: Adding info for acpi:device:25
>PM: Adding info for acpi:device:26
>PM: Adding info for acpi:video:01
>PM: Adding info for acpi:device:27
>PM: Adding info for acpi:device:28
>PM: Adding info for acpi:device:29
>PM: Adding info for acpi:device:2a
>PM: Adding info for acpi:device:2b
>PM: Adding info for acpi:device:2c
>PM: Adding info for acpi:device:2d
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:PNP0C0F:08
>PM: Adding info for acpi:PNP0C0F:09
>PM: Adding info for acpi:PNP0C0F:0a
>PM: Adding info for acpi:PNP0C0F:0b
>PM: Adding info for acpi:PNP0C0F:0c
>PM: Adding info for acpi:PNP0C0F:0d
>PM: Adding info for acpi:PNP0C0F:0e
>PM: Adding info for acpi:PNP0C0F:0f
>PM: Adding info for acpi:PNP0C0F:10
>PM: Adding info for acpi:PNP0C0F:11
>PM: Adding info for acpi:PNP0C0F:12
>PM: Adding info for acpi:PNP0C32:00
>PM: Adding info for acpi:PNP0C32:01
>PM: Adding info for acpi:PNP0C32:02
>PM: Adding info for acpi:PNP0C32:03
>PM: Adding info for acpi:PNP0C32:04
>PM: Adding info for acpi:PNP0C32:05
>PM: Adding info for acpi:PNP0C32:06
>PM: Adding info for acpi:thermal:00
>PM: Adding info for acpi:thermal:01
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>Boot video device is 0000:00:05.0
>0000:00:0d.0: cannot adjust BAR0 (not I/O)
>0000:00:0d.0: cannot adjust BAR1 (not I/O)
>0000:00:0d.0: cannot adjust BAR2 (not I/O)
>0000:00:0d.0: cannot adjust BAR3 (not I/O)
>PCI: Transparent bridge - 0000:00:10.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:00.1
>PM: Adding info for pci:0000:00:00.2
>PM: Adding info for pci:0000:00:00.3
>PM: Adding info for pci:0000:00:00.4
>PM: Adding info for pci:0000:00:00.5
>PM: Adding info for pci:0000:00:00.6
>PM: Adding info for pci:0000:00:00.7
>PM: Adding info for pci:0000:00:02.0
>PM: Adding info for pci:0000:00:03.0
>PM: Adding info for pci:0000:00:05.0
>PM: Adding info for pci:0000:00:09.0
>PM: Adding info for pci:0000:00:0a.0
>PM: Adding info for pci:0000:00:0a.1
>PM: Adding info for pci:0000:00:0a.3
>PM: Adding info for pci:0000:00:0b.0
>PM: Adding info for pci:0000:00:0b.1
>PM: Adding info for pci:0000:00:0d.0
>PM: Adding info for pci:0000:00:0e.0
>PM: Adding info for pci:0000:00:10.0
>PM: Adding info for pci:0000:00:10.1
>PM: Adding info for pci:0000:00:14.0
>PM: Adding info for pci:0000:00:18.0
>PM: Adding info for pci:0000:00:18.1
>PM: Adding info for pci:0000:00:18.2
>PM: Adding info for pci:0000:00:18.3
>PM: Adding info for pci:0000:03:00.0
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
>ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *11
>ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 11) *10
>ACPI: PCI Interrupt Link [LUS0] (IRQs 22) *11
>ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *10
>ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 21) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 23) *5
>ACPI: PCI Interrupt Link [LSI1] (IRQs 20) *10
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>PM: Adding info for pnp:00:08
>PM: Adding info for pnp:00:09
>PM: Adding info for pnp:00:0a
>PM: Adding info for pnp:00:0b
>PM: Adding info for pnp:00:0c
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xffc00000-0xffffffff could not be reserved
>pnp: 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
>Time: hpet clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>pnp: 00:01: iomem range 0xfed00000-0xfed00fff could not be reserved
>pnp: 00:03: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:04: ioport range 0x1000-0x107f has been reserved
>pnp: 00:04: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:04: ioport range 0x1400-0x147f has been reserved
>pnp: 00:04: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:04: ioport range 0x1800-0x187f has been reserved
>pnp: 00:04: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:04: ioport range 0x2000-0x203f has been reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PM: Adding info for No Bus:oldmem
>PCI: Bridge: 0000:00:02.0
> IO window: 4000-4fff
> MEM window: b4000000-b7ffffff
> PREFETCH window: d0000000-d01fffff
>PCI: Bridge: 0000:00:03.0
> IO window: disabled.
> MEM window: b8000000-bbffffff
> PREFETCH window: disabled.
>PCI: Bridge: 0000:00:10.0
> IO window: disabled.
> MEM window: disabled.
> PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3440k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1175840849.322:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1F0F9D4ECD9ADD38
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PM: Adding info for pci_express:0000:00:02.0:pcie00
>Allocate Port Service[0000:00:02.0:pcie03]
>PM: Adding info for pci_express:0000:00:02.0:pcie03
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PM: Adding info for pci_express:0000:00:03.0:pcie00
>Allocate Port Service[0000:00:03.0:pcie03]
>PM: Adding info for pci_express:0000:00:03.0:pcie03
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI: Thermal Zone [THRM] (48 C)
>PM: Adding info for No Bus:pnp1
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>hpet_resources: 0xfed00000 is busy
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>PM: Adding info for No Bus:isa
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Turion(tm) 64 X2 Mobile Technology TL-56 processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x13
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x15
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x1e
>Using IPI No-Shortcut mode
> Magic number: 3:995:467
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.0 to 64
>ohci_hcd 0000:00:0b.0: OHCI Host Controller
>ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0b.0: irq 16, io mem 0xb0004000
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:0b.1 to 64
>ehci_hcd 0000:00:0b.1: EHCI Host Controller
>ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0b.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0b.1
>ehci_hcd 0000:00:0b.1: irq 16, io mem 0xb0005000
>ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 8 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>SCSI subsystem initialized
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
>libata version 2.20 loaded.
>sata_nv 0000:00:0e.0: version 3.3
>PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 23 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>ata1: SATA max UDMA/133 cmd 0x000130c0 ctl 0x000130b6 bmdma 0x00013090 irq 17
>ata2: SATA max UDMA/133 cmd 0x000130b8 ctl 0x000130b2 bmdma 0x00013098 irq 17
>scsi0 : sata_nv
>PM: Adding info for No Bus:host0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2 
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST9120821AS, 7.24, max UDMA/100
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi1 : sata_nv
>PM: Adding info for No Bus:host1
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x000130bf
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     ATA      ST9120821AS      7.24 PQ: 0 ANSI: 5
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1175840856.321:2): selinux=0 auid=4294967295
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Removing info for No Bus:vcs1
>PM: Removing info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>PM: Adding info for No Bus:timer
>EDAC MC: Ver: 2.0.1 Apr  2 2007
>PM: Adding info for No Bus:i2c-0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3040
>PM: Adding info for No Bus:i2c-1
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3000
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 20 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>forcedeth: using HIGHDMA
>input: PC Speaker as /class/input/input3
>PM: Adding info for No Bus:seq
>PM: Adding info for No Bus:sequencer
>PM: Adding info for No Bus:sequencer2
>rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:09 failed with error -16
>PM: Adding info for No Bus:eth0
>eth0: forcedeth.c: subsystem: 0103c:30b7 bound to 0000:00:14.0
>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK4E] -> GSI 19 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
>ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
>ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI-E core, index 3
>PM: Adding info for ssb:ssb0:0
>PM: Adding info for ssb:ssb0:1
>bcm43xx_mac80211: Broadcom 4311 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>pata_amd 0000:00:0d.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ata3: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013080 irq 14
>ata4: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013088 irq 15
>scsi2 : pata_amd
>PM: Adding info for No Bus:host2
>bcm43xx_mac80211: Radio turned off
>PM: Adding info for No Bus:wiphy0
>PM: Adding info for No Bus:wmaster0
>wmaster0: Selected rate control algorithm 'simple'
>PM: Adding info for No Bus:wlan0
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>bcm43xx driver
>ata3.00: ATAPI, max MWDMA2
>ata3.00: configured for MWDMA2
>scsi3 : pata_amd
>PM: Adding info for No Bus:host3
>ata4: port disabled. ignoring.
>PM: Adding info for No Bus:target2:0:0
>scsi 2:0:0:0: CD-ROM            TSSTcorp CDW/DVD TS-L462D HH08 PQ: 0 ANSI: 5
>PM: Adding info for scsi:2:0:0:0
>scsi 2:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 21 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:10.1 to 64
>PM: Adding info for No Bus:pcmC0D1p
>PM: Adding info for No Bus:adsp
>PM: Adding info for No Bus:pcmC0D0p
>PM: Adding info for No Bus:pcmC0D0c
>PM: Adding info for No Bus:dsp
>PM: Adding info for No Bus:audio
>PM: Adding info for No Bus:controlC0
>PM: Adding info for No Bus:mixer
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 2:0:0:0: Attached scsi CD-ROM sr0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [ACAD] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>set_level status: 0
>ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
>set_level status: 0
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k

Actions: View

Attachments on bug 235522: 151892 | 151904 | 151905