Attachment 152102 Details for Bug 235787 – dmesg output from bootin a rawhide kernel on M2R32-MVP

dmesg output from bootin a rawhide kernel on M2R32-MVP

dmesg.2.6.20-1.3053.fc7 (text/plain), 17.66 KB, created by Michal Jaegermann on 2007-04-10 06:00:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Michal Jaegermann

Created: 2007-04-10 06:00:25 UTC

Size: 17.66 KB

patch

obsolete

>Linux version 2.6.20-1.3053.fc7 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070403 (Red Hat 4.1.2-8)) #1 SMP Mon Apr 9 00:55:46 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 selinux=0 1 acpi=off
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
> BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
> BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2365 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11174 pages used for memmap
>  DMA32 zone: 508938 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ATI board detected. Disabling timer routing over 8254.
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: TEMPLATE MPTABLE: Product ID:  MPTABLE: APIC at: 0xFEE00000
>Processor #0 (Bootup-CPU)
>Processor #1
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to physical flat
>Processors: 2
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f700000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510484
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 selinux=0 1 acpi=off
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2405.545 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 3d3c000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2036120k/2096832k available (2464k kernel code, 60324k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 4813.74 BogoMIPS (lpj=2406870)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ExtINT not setup in hardware but reported by MP table
>Using local APIC timer interrupts.
>result 12528891
>Detected 12.528 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4810.22 BogoMIPS (lpj=2405111)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=224
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>ACPI: Interpreter disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI: disabled
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Probing PCI hardware
>PCI: Probing PCI hardware (bus 00)
>0000:00:12.0: trying to change BAR0 from 0000 to 01F0
>0000:00:12.0: trying to change BAR1 from 0000 to 03F4
>0000:00:12.0: trying to change BAR2 from 0000 to 0170
>0000:00:12.0: trying to change BAR3 from 0000 to 0374
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Using IRQ router default [1002/438d] at 0000:00:14.3
>PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 21
>PCI->APIC IRQ transform: 0000:00:13.0[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:13.1[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:13.2[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:13.3[B] -> IRQ 17
>PCI->APIC IRQ transform: 0000:00:13.4[C] -> IRQ 18
>PCI->APIC IRQ transform: 0000:00:13.5[D] -> IRQ 19
>PCI->APIC IRQ transform: 0000:00:14.1[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:00:14.2[A] -> IRQ 16
>PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18
>PCI->APIC IRQ transform: 0000:02:00.0[A] -> IRQ 17
>PCI->APIC IRQ transform: 0000:03:04.0[A] -> IRQ 23
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:02.0
>  IO window: c000-cfff
>  MEM window: fbd00000-fbdfffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:05.0
>  IO window: d000-dfff
>  MEM window: fbe00000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.4
>  IO window: e000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2381k freed
>audit: initializing netlink socket (disabled)
>audit(1176162921.177:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 2EC45FD732323D19
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbcff000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbcfe000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.2: OHCI Host Controller
>ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbcfd000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>ohci_hcd 0000:00:13.3: OHCI Host Controller
>ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4
>ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbcfc000
>usb 1-1: configuration #1 chosen from 1 choice
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd 0000:00:13.4: OHCI Host Controller
>ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbcfb000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-1: new full speed USB device using ohci_hcd and address 2
>ehci_hcd 0000:00:13.5: EHCI Host Controller
>ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:13.5: debug port 1
>ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbcfac00
>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ahci 0000:00:12.0: version 2.1
>usb 1-1: USB disconnect, address 2
>usb 6-3: new high speed USB device using ehci_hcd and address 3
>usb 6-3: configuration #1 chosen from 1 choice
>hub 6-3:1.0: USB hub found
>hub 6-3:1.0: 2 ports detected
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
>ahci 0000:00:12.0: flags: 64bit ncq ilck pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xffffc20000018100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata2: SATA max UDMA/133 cmd 0xffffc20000018180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata3: SATA max UDMA/133 cmd 0xffffc20000018200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata4: SATA max UDMA/133 cmd 0xffffc20000018280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>scsi0 : ahci
>usb 6-9: new high speed USB device using ehci_hcd and address 5
>usb 6-9: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
>ata1.00: 234441648 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/133
>scsi1 : ahci
>usb 1-1: new full speed USB device using ohci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata2.00: ATA-7: WDC WD1200JS-22MHB0, 02.01C03, max UDMA/133
>ata2.00: 234441648 sectors, multi 16: LBA48 
>ata2.00: configured for UDMA/133
>scsi2 : ahci
>usb 2-2: new low speed USB device using ohci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-2
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200JS-22M 02.0 PQ: 0 ANSI: 5
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
>sd 1:0:0:0: Attached scsi disk sdb
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xffffc2000001c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 17
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 5:0:0:0: Attached scsi removable disk sdc
>sd 5:0:0:1: Attached scsi removable disk sdd
>sd 5:0:0:2: Attached scsi removable disk sde
>sd 5:0:0:3: Attached scsi removable disk sdf
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x043D pid 0x000C
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>skge 1.10 addr 0xfbffc000 irq 23 chip Yukon-Lite rev 9
>skge eth0: addr 00:18:f3:46:e2:34
>EDAC MC: Ver: 2.0.1 Apr  9 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ata6: PATA max UDMA/100 cmd 0x000000000001b000 ctl 0x000000000001a002 bmdma 0x0000000000017000 irq 16
>ata7: PATA max UDMA/100 cmd 0x0000000000019000 ctl 0x0000000000018002 bmdma 0x0000000000017008 irq 16
>scsi6 : pata_atiixp
>ata6.00: ATAPI, max UDMA/66
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 5:0:0:0: Attached scsi generic sg2 type 0
>sd 5:0:0:1: Attached scsi generic sg3 type 0
>sd 5:0:0:2: Attached scsi generic sg4 type 0
>sd 5:0:0:3: Attached scsi generic sg5 type 0
>ata6.00: configured for UDMA/33
>scsi7 : pata_atiixp
>scsi 6:0:0:0: CD-ROM            LITE-ON  DVDRW LH-20A1P   KL05 PQ: 0 ANSI: 5
>scsi 6:0:0:0: Attached scsi generic sg6 type 5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>reset set in interrupt, calling ffffffff882461a5
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>loop: loaded (max 8 devices)
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-13, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-11, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-12, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 987988k swap on /dev/sda2.  Priority:10 extents:1 across:987988k
>Adding 987988k swap on /dev/sdb2.  Priority:10 extents:1 across:987988k

Actions: View

Attachments on bug 235787: 152102 | 152106