Attachment 152190 Details for Bug 235953 – complete dmesg and where the udev references ocurr

complete dmesg and where the udev references ocurr

dmesg-avcs.txt (text/plain), 24.33 KB, created by Antonio A. Olivares on 2007-04-11 00:57:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Antonio A. Olivares

Created: 2007-04-11 00:57:01 UTC

Size: 24.33 KB

patch

obsolete

>Linux version 2.6.20-1.3053.fc7 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070403 (Red Hat 4.1.2-8)) #1 SMP Mon Apr 9 01:18:41 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000002fed0000 end: 000000002ffd0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000002ffd0000 size: 000000000000f000 end: 000000002ffdf000 type: 3
>copy_e820_map() start: 000000002ffdf000 size: 0000000000021000 end: 0000000030000000 type: 4
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff7c0000 size: 0000000000840000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
> BIOS-e820: 000000002ffd0000 - 000000002ffdf000 (ACPI data)
> BIOS-e820: 000000002ffdf000 - 0000000030000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>767MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 196560) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   196560
>  HighMem    196560 ->   196560
>early_node_map[1] active PFN ranges
>    0:        0 ->   196560
>On node 0 totalpages: 196560
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2443 pages used for memmap
>  Normal zone: 190021 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F97A0, 0014 (r0 ACPIAM)
>ACPI: RSDT 2FFD0000, 0030 (r1 A M I  OEMRSDT  11000325 MSFT       97)
>ACPI: FACP 2FFD0200, 0081 (r2 A M I  OEMFACP  11000325 MSFT       97)
>ACPI: DSDT 2FFD03F0, 39BF (r1  A0007 A0007000        1 INTL  2002026)
>ACPI: FACS 2FFDF000, 0040
>ACPI: APIC 2FFD0390, 005E (r1 A M I  OEMAPIC  11000325 MSFT       97)
>ACPI: OEMB 2FFDF040, 0041 (r1 A M I  OEMBIOS  11000325 MSFT       97)
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x4008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:10 APIC version 16
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
>Built 1 zonelists.  Total pages: 194065
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1913.222 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 764712k/786240k available (2150k kernel code, 20864k reserved, 1140k data, 248k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf0800000 - 0xff7fe000   ( 239 MB)
>    lowmem  : 0xc0000000 - 0xeffd0000   ( 767 MB)
>      .init : 0xc073c000 - 0xc077a000   ( 248 kB)
>      .data : 0xc06199dd - 0xc0736cb4   (1140 kB)
>      .text : 0xc0400000 - 0xc06199dd   (2150 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3828.60 BogoMIPS (lpj=1914301)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU: After all inits, caps: 0383f3ff c1c3fbff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: AMD Athlon(tm) XP  2600+ stepping 00
>Total of 1 processors activated (3828.60 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>Time: 12:57:06  Date: 03/10/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: nForce2 C1 Halt Disconnect fixup
>0000:00:09.0: cannot adjust BAR0 (not I/O)
>0000:00:09.0: cannot adjust BAR1 (not I/O)
>0000:00:09.0: cannot adjust BAR2 (not I/O)
>0000:00:09.0: cannot adjust BAR3 (not I/O)
>Boot video device is 0000:02:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *11
>ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *11
>ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *10
>ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *7
>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
>ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
>ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
>ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
>ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
>ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
>pnp: 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved
>pnp: 00:07: iomem range 0xff780000-0xff7bffff has been reserved
>pnp: 00:0a: ioport range 0x480-0x487 has been reserved
>pnp: 00:0a: ioport range 0xd00-0xd07 has been reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x2fffffff could not be reserved
>PCI: Bridge: 0000:00:08.0
>  IO window: d000-dfff
>  MEM window: fbd00000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: fbf00000-fe0fffff
>  PREFETCH window: e3c00000-f3bfffff
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3462k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1176209826.192:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 533B5BBD544B50C1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Switched to high resolution mode on CPU 0
>0000:00:02.0 OHCI: BIOS handoff failed (BIOS bug ?) 000007b4
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected NVIDIA nForce2 chipset
>agpgart: AGP aperture is 64M @ 0xf4000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKC] -> GSI 18 (level, high) -> IRQ 16
>0000:01:08.0: ttyS2 at I/O 0xd828 (irq = 16) is a 8250
>0000:01:08.0: ttyS3 at I/O 0xd840 (irq = 16) is a 8250
>Couldn't register serial port 0000:01:08.0: -28
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 6a0 not supported
>Using IPI No-Shortcut mode
>  Magic number: 3:452:986
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 17, io mem 0xfe900000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ohci_hcd 0000:00:02.1: OHCI Host Controller
>ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.1: irq 18, io mem 0xfea00000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:02.2 to 64
>ehci_hcd 0000:00:02.2: EHCI Host Controller
>ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:02.2: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.2
>ehci_hcd 0000:00:02.2: irq 19, io mem 0xfeb00000
>ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>usb 1-1: new full speed USB device using ohci_hcd and address 3
>usb 1-1: configuration #1 chosen from 1 choice
>pata_amd 0000:00:09.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi0 : pata_amd
>ata1.00: ATA-7: MAXTOR STM3320620A, 3.AAD, max UDMA/100
>ata1.00: 625142448 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi1 : pata_amd
>ata2.00: ATAPI, max UDMA/33
>ata2.01: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>ata2.01: qc timeout (cmd 0xef)
>ata2.01: failed to set xfermode (err_mask=0x4)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: configured for UDMA/33
>ata2.01: qc timeout (cmd 0xef)
>ata2.01: failed to set xfermode (err_mask=0x4)
>ata2.01: limiting speed to UDMA/33:PIO3
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: configured for UDMA/33
>ata2.01: qc timeout (cmd 0xef)
>ata2.01: failed to set xfermode (err_mask=0x4)
>ata2.01: disabled
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: failed to set xfermode (err_mask=0x40)
>ata2: failed to recover some devices, retrying in 5 secs
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 < sda5 sda6 > sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182D SB03 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1176209964.172:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1784 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 64249 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176209964.671:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4300
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4340
>drivers/usb/class/usblp.c: Disabling reads from problem bidirectional printer on usblp0
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LKLN] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>input: PC Speaker as /class/input/input3
>drivers/usb/class/usblp.c: usblp0: USB Unidirectional printer dev 3 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0304
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:02 failed with error -16
>eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
>audit(1176209974.281:4): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1440" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:5): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1680" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:6): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1722" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:7): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1743" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:8): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1760" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:9): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1920" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:10): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1840" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:11): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1600" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:12): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u360" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:13): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u720" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:14): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u820" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:15): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u830" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:16): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1040" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:17): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u1120" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>audit(1176209974.281:18): avc:  denied  { create } for  pid=991 comm="create_floppy_d" name="fd0u800" scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=blk_file
>ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>intel8x0_measure_ac97_clock: measured 50453 usecs
>intel8x0: clocking to 47485
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1574328k swap on /dev/sda5.  Priority:-1 extents:1 across:1574328k
>Adding 1540088k swap on /dev/VolGroup00/LogVol01.  Priority:-2 extents:1 across:1540088k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (6142 buckets, 49136 max)
>audit(1176209987.779:19): audit_pid=1852 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ppdev: user-space parallel port driver
>ppdev0: claim the port first
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>ppdev0: claim the port first
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>cdrom: sr0: mrw address space DMA selected
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISOFS: changing to secondary root
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>cdrom: This disc doesn't have any tracks I recognize!
>cdrom: sr0: mrw address space DMA selected
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts

Actions: View

Attachments on bug 235953: 152190