Attachment 152191 Details for Bug 235956 – dmesg from the affected system.

dmesg from the affected system.

dmesg.txt (text/plain), 22.72 KB, created by Martin Kristensen on 2007-04-11 02:09:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Martin Kristensen

Created: 2007-04-11 02:09:53 UTC

Size: 22.72 KB

patch

obsolete

>Linux version 2.6.20-1.3054.fc7 (brewbuilder@ls20-bc1-13.build.redhat.com) (gcc version 4.1.2 20070403 (Red Hat 4.1.2-8)) #1 SMP Mon Apr 9 15:01:19 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FA7C0, 0014 (r0 ACPIAM)
>ACPI: RSDT 7FFB0000, 0030 (r1 A M I  OEMRSDT  12000530 MSFT       97)
>ACPI: FACP 7FFB0200, 0081 (r1 A M I  OEMFACP  12000530 MSFT       97)
>ACPI: DSDT 7FFB03F0, 3A3E (r1  A0036 A0036001        1 MSFT  100000D)
>ACPI: FACS 7FFC0000, 0040
>ACPI: APIC 7FFB0390, 0052 (r1 A M I  OEMAPIC  12000530 MSFT       97)
>ACPI: OEMB 7FFC0040, 003F (r1 A M I  OEMBIOS  12000530 MSFT       97)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2365 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11174 pages used for memmap
>  DMA32 zone: 508938 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e4000
>Nosave address range: 00000000000e4000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7f780000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510484
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2202.895 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ dc000000 size 64 MB
>Memory: 2034804k/2096832k available (2464k kernel code, 61640k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 4409.66 BogoMIPS (lpj=2204832)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12516472
>Detected 12.516 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4404.95 BogoMIPS (lpj=2202479)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=276
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:0f.1: cannot adjust BAR0 (not I/O)
>0000:00:0f.1: cannot adjust BAR1 (not I/O)
>0000:00:0f.1: cannot adjust BAR2 (not I/O)
>0000:00:0f.1: cannot adjust BAR3 (not I/O)
>PCI: enabled onboard AC97/MC97 devices
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 0 of device 0000:00:00.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 64M @ 0xdc000000
>pnp: 00:06: ioport range 0x680-0x6ff has been reserved
>pnp: 00:06: ioport range 0x290-0x297 has been reserved
>pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
>pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0b: iomem range 0xc0000-0xdffff has been reserved
>pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0b: iomem range 0x100000-0x7ffeffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>Time: acpi_pm clocksource has been installed.
>  IO window: disabled.
>  MEM window: f9f00000-fbffffff
>  PREFETCH window: e0000000-f8ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3697k freed
>audit: initializing netlink socket (disabled)
>audit(1176255622.892:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 665969BDE448F34
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x8
>powernow-k8:    1 : fid 0xc (2000 MHz), vid 0xa
>powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xc
>powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 21, io base 0x0000d400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 21, io base 0x0000d800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9e00000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>pata_via 0000:00:0f.1: version 0.2.1
>ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001fc08 irq 15
>scsi0 : pata_via
>ata1.00: ATAPI, max UDMA/66
>ata1.00: configured for UDMA/66
>scsi1 : pata_via
>ata2.00: ATA-6: IC35L120AVV207-0, V24OA66A, max UDMA/100
>ata2.00: 241254720 sectors, multi 16: LBA48 
>ata2.01: ATA-5: MAXTOR 6L080L4, A93.0500, max UDMA/133
>ata2.01: 156355584 sectors, multi 16: LBA 
>ata2.00: configured for UDMA/100
>ata2.01: configured for UDMA/133
>scsi 0:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-108  1.04 PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      IC35L120AVV207-0 V24O PQ: 0 ANSI: 5
>SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: Attached scsi disk sda
>scsi 1:0:1:0: Direct-Access     ATA      MAXTOR 6L080L4   A93. PQ: 0 ANSI: 5
>SCSI device sdb: 156355584 512-byte hdwr sectors (80054 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 156355584 512-byte hdwr sectors (80054 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:1:0: Attached scsi disk sdb
>usb 5-4: new high speed USB device using ehci_hcd and address 4
>usb 5-4: configuration #1 chosen from 1 choice
>hub 5-4:1.0: USB hub found
>hub 5-4:1.0: 4 ports detected
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input1
>input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:10.0-2
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>usb 2-1.1: new low speed USB device using uhci_hcd and address 3
>usb 2-1.1: configuration #1 chosen from 1 choice
>input: Logitech Logitech Gaming Keyboard as /class/input/input2
>input: USB HID v1.10 Keyboard [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-1.1
>input: Logitech Logitech Gaming Keyboard as /class/input/input3
>input,hiddev96: USB HID v1.10 Device [Logitech Logitech Gaming Keyboard] on usb-0000:00:10.1-1.1
>usb 2-1.4: new full speed USB device using uhci_hcd and address 4
>usb 2-1.4: configuration #1 chosen from 1 choice
>input: G15 Keyboard G15 Keyboard as /class/input/input4
>input,hiddev97: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:10.1-1.4
>sata_via 0000:00:0f.0: version 2.1
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
>sata_via 0000:00:0f.0: routed to hard irq line 10
>ata3: SATA max UDMA/133 cmd 0x000000000001d000 ctl 0x000000000001c802 bmdma 0x000000000001b800 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001c400 ctl 0x000000000001c002 bmdma 0x000000000001b808 irq 20
>scsi2 : sata_via
>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ATA: abnormal status 0x7F on port 0x000000000001d007
>ATA: abnormal status 0x7F on port 0x000000000001d007
>ata3.00: ATA-6: ST3160023AS, 3.18, max UDMA/133
>ata3.00: 312581808 sectors, multi 16: LBA48 
>ata3.00: configured for UDMA/133
>scsi3 : sata_via
>ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x000000000001c407
>scsi 2:0:0:0: Direct-Access     ATA      ST3160023AS      3.18 PQ: 0 ANSI: 5
>SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: Attached scsi disk sdc
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1176255631.488:2): selinux=0 auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>sd 2:0:0:0: Attached scsi generic sg3 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16
>fw_ohci: Added fw-ohci device 0000:00:07.0, OHCI version 1.0
>input: PC Speaker as /class/input/input5
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 17
>skge 1.10 addr 0xf9c00000 irq 17 chip Yukon-Lite rev 7
>skge eth0: addr 00:11:2f:87:e2:79
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>EDAC MC: Ver: 2.0.1 Apr  9 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>fw_core: created new fw device fw0 (0 config rom retries)
>rtc_cmos: probe of 00:02 failed with error -16
>Loading module: rt2x00lib - CVS (N/A) by http://rt2x00.serialmonkey.com.
>Loading module: rt2500pci - CVS (N/A) by http://rt2x00.serialmonkey.com.
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
>wmaster0: Selected rate control algorithm 'simple'
>ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>PCI: Enabling device 0000:00:11.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:11.6[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:11.6 to 64
>ACPI: PCI interrupt for device 0000:00:11.6 disabled
>VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>No dock devices found.
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input7
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input8
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1176255659.274:3): audit_pid=2103 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>
>=================================
>[ INFO: inconsistent lock state ]
>2.6.20-1.3054.fc7 #1
>---------------------------------
>inconsistent {hardirq-on-W} -> {in-hardirq-R} usage.
>swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
> (dev_base_lock){-.??}, at: [<ffffffff80411171>] dev_get_by_index+0x17/0x40
>{hardirq-on-W} state was registered at:
>  [<ffffffff802a3185>] __lock_acquire+0x491/0xbd1
>  [<ffffffff802a3cbb>] lock_acquire+0x4c/0x65
>  [<ffffffff8041044e>] register_netdevice+0x2c2/0x366
>  [<ffffffff80263b32>] _write_lock_bh+0x2a/0x36
>  [<ffffffff8041044e>] register_netdevice+0x2c2/0x366
>  [<ffffffff8041052c>] register_netdev+0x3a/0x48
>  [<ffffffff806a2f10>] loopback_init+0x10/0x12
>  [<ffffffff80686ab9>] init+0x219/0x316
>  [<ffffffff802a2871>] trace_hardirqs_on+0x136/0x15a
>  [<ffffffff8025cfa8>] child_rip+0xa/0x12
>  [<ffffffff80263d40>] _spin_unlock_irq+0x2b/0x31
>  [<ffffffff8025c6bc>] restore_args+0x0/0x30
>  [<ffffffff806868a0>] init+0x0/0x316
>  [<ffffffff8025cf9e>] child_rip+0x0/0x12
>  [<ffffffffffffffff>] 0xffffffffffffffff
>irq event stamp: 1275744
>hardirqs last  enabled at (1275743): [<ffffffff8026a69b>] default_idle+0x35/0x51
>hardirqs last disabled at (1275744): [<ffffffff8026355e>] trace_hardirqs_off_thunk+0x35/0x67
>softirqs last  enabled at (1275738): [<ffffffff80211d34>] __do_softirq+0xda/0xe3
>softirqs last disabled at (1275729): [<ffffffff8025d31c>] call_softirq+0x1c/0x28
>
>other info that might help us debug this:
>no locks held by swapper/0.
>
>stack backtrace:
>
>Call Trace:
> <IRQ>  [<ffffffff802a1ad7>] print_usage_bug+0x162/0x173
> [<ffffffff802a237b>] mark_lock+0x1a2/0x442
> [<ffffffff802a30d1>] __lock_acquire+0x3dd/0xbd1
> [<ffffffff802a3cbb>] lock_acquire+0x4c/0x65
> [<ffffffff80411171>] dev_get_by_index+0x17/0x40
> [<ffffffff80263bd6>] _read_lock+0x28/0x34
> [<ffffffff80411171>] dev_get_by_index+0x17/0x40
> [<ffffffff881d8c88>] :mac80211:ieee80211_beacon_get+0x26/0x486
> [<ffffffff8823d697>] :rt2500pci:rt2500pci_interrupt+0x71/0x15a
> [<ffffffff80210753>] handle_IRQ_event+0x20/0x55
> [<ffffffff802bd8ac>] handle_fasteoi_irq+0x9d/0xdd
> [<ffffffff8026bf7f>] do_IRQ+0xf6/0x166
> [<ffffffff8026a666>] default_idle+0x0/0x51
> [<ffffffff8025c666>] ret_from_intr+0x0/0xf
> <EOI>  [<ffffffff80260eba>] __sched_text_start+0x92a/0x962
> [<ffffffff8026a69b>] default_idle+0x35/0x51
> [<ffffffff8026a69d>] default_idle+0x37/0x51
> [<ffffffff8026a69b>] default_idle+0x35/0x51
> [<ffffffff8024895d>] cpu_idle+0xa1/0xc4
> [<ffffffff80269cea>] rest_init+0x2b/0x2d
> [<ffffffff80686893>] start_kernel+0x2e3/0x2f0
> [<ffffffff80686158>] _sinittext+0x158/0x15f
>
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>eth0: no IPv6 routers present
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed
>wlan0: starting scan
>wlan0: scan completed

Actions: View

Attachments on bug 235956: 152191 | 152192 | 154004 | 154092