Attachment 152513 Details for Bug 235649 – output of dmesg

output of dmesg

fc6-dmesg.txt (text/plain), 19.99 KB, created by chocomilk on 2007-04-13 00:46:28 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: chocomilk

Created: 2007-04-13 00:46:28 UTC

Size: 19.99 KB

patch

obsolete

>Linux version 2.6.20-1.2933.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000000fed0000 end: 000000000ffd0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000ffd0000 size: 000000000000f000 end: 000000000ffdf000 type: 3
>copy_e820_map() start: 000000000ffdf000 size: 0000000000001000 end: 000000000ffe0000 type: 4
>copy_e820_map() start: 000000000ffe0000 size: 0000000000020000 end: 0000000010000000 type: 2
>copy_e820_map() start: 00000000fffe0000 size: 0000000000020000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000ffd0000 (usable)
> BIOS-e820: 000000000ffd0000 - 000000000ffdf000 (ACPI data)
> BIOS-e820: 000000000ffdf000 - 000000000ffe0000 (ACPI NVS)
> BIOS-e820: 000000000ffe0000 - 0000000010000000 (reserved)
> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>255MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 65488) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    65488
>  HighMem     65488 ->    65488
>early_node_map[1] active PFN ranges
>    0:        0 ->    65488
>On node 0 totalpages: 65488
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 599 pages used for memmap
>  Normal zone: 60793 pages, LIFO batch:15
>  HighMem zone: 0 pages used for memmap
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP (v000 IBM                                   ) @ 0x000fd6e0
>ACPI: RSDT (v001 IBM    TP600X   0x00000001  0x00000000) @ 0x0ffd0000
>ACPI: FADT (v001 IBM    TP600X   0x00000001  0x00000000) @ 0x0ffd0100
>ACPI: BOOT (v001 IBM    TP600X   0x00000001  0x00000000) @ 0x0ffd0040
>ACPI: DSDT (v001 IBM    TP600X   0x00000102 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xef08
>Allocating PCI resources starting at 20000000 (gap: 10000000:effe0000)
>Detected 498.296 MHz processor.
>Built 1 zonelists.  Total pages: 64849
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet 
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0128b000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07aa000 soft=c078a000
>PID hash table entries: 1024 (order: 10, 4096 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
>Memory: 251960k/261952k available (2188k kernel code, 9432k reserved, 1157k data, 236k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
>    lowmem  : 0xc0000000 - 0xcffd0000   ( 255 MB)
>      .init : 0xc074a000 - 0xc0785000   ( 236 kB)
>      .data : 0xc0623031 - 0xc0744494   (1157 kB)
>      .text : 0xc0400000 - 0xc0623031   (2188 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 997.17 BogoMIPS (lpj=498586)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel Pentium III (Coppermine) stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>0000:00:07.1: cannot adjust BAR0 (not I/O)
>0000:00:07.1: cannot adjust BAR1 (not I/O)
>0000:00:07.1: cannot adjust BAR2 (not I/O)
>0000:00:07.1: cannot adjust BAR3 (not I/O)
>PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
>PCI quirk: region efa0-efaf claimed by PIIX4 SMB
>PIIX4 devres C PIO at 15e8-15ef
>PIIX4 devres I PIO at 002e-002f
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
>ACPI: Power Resource [PSIO] (on)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PVID] (on)
>ACPI: Power Resource [PRSD] (off)
>ACPI: Power Resource [PDCK] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0x15e0-0x15ef has been reserved
>pnp: 00:08: ioport range 0xef00-0xef3f could not be reserved
>pnp: 00:08: ioport range 0xefa0-0xefaf has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: 70000000-dfffffff
>  PREFETCH window: e0000000-f7ffffff
>PCI: Bus 2, cardbus bridge: 0000:00:02.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 20000000-23ffffff
>  MEM window: 24000000-27ffffff
>PCI: Bus 6, cardbus bridge: 0000:00:02.1
>  IO window: 00001800-000018ff
>  IO window: 00001c00-00001cff
>  PREFETCH window: 28000000-2bffffff
>  MEM window: 2c000000-2fffffff
>ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 0, using IRQ 11
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 10
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>NET: Registered protocol family 2
>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
>TCP established hash table entries: 8192 (order: 5, 163840 bytes)
>TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
>TCP: Hash tables configured (established 8192 bind 4096)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2259k freed
>Simple Boot Flag at 0x33 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1176284976.097:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A99AD4F3D245F54
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Limiting direct PCI/PCI transfers.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FN00] to D3
>ACPI: Transitioning device [FN00] to D3
>ACPI: Fan [FN00] (off)
>ACPI: Transitioning device [FN20] to D3
>ACPI: Transitioning device [FN20] to D3
>ACPI: Fan [FN20] (off)
>ACPI: Transitioning device [FN60] to D3
>ACPI: Transitioning device [FN60] to D3
>ACPI: Fan [FN60] (off)
>ACPI: Transitioning device [FN70] to D3
>ACPI: Transitioning device [FN70] to D3
>ACPI: Fan [FN70] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (51 C)
>ACPI: Thermal Zone [THM2] (44 C)
>ACPI: Thermal Zone [THM6] (35 C)
>ACPI: Thermal Zone [THM7] (27 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 440BX Chipset.
>agpgart: AGP aperture is 64M @ 0x40000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>pnp: Device 00:03 activated.
>00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PIIX4: IDE controller at PCI slot 0000:00:07.1
>PIIX4: chipset revision 1
>PIIX4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: TOSHIBA MK4019GAXB, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: MATSHITADVD-ROM SR-8174, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 78140160 sectors (40007 MB), CHS=65535/16/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
>Socket status: 30000010
>Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
>irq 10: nobody cared (try booting with the "irqpoll" option)
> [<c044f976>] __report_bad_irq+0x36/0x7d
> [<c044fb57>] note_interrupt+0x19a/0x1d7
> [<c044f0ed>] handle_IRQ_event+0x1a/0x3f
> [<c045045c>] handle_level_irq+0xa7/0xdf
> [<c04503b5>] handle_level_irq+0x0/0xdf
> [<c04062be>] do_IRQ+0xb5/0xdb
> [<c0422b39>] run_rebalance_domains+0x116/0x33e
> [<c04048f3>] common_interrupt+0x23/0x28
> [<c042b8ff>] __do_softirq+0x54/0xba
> [<c04061b1>] do_softirq+0x59/0xb1
> [<c0427568>] release_console_sem+0x183/0x1c2
> [<c04503b5>] handle_level_irq+0x0/0xdf
> [<c04062cf>] do_IRQ+0xc6/0xdb
> [<c04048f3>] common_interrupt+0x23/0x28
> [<c061007b>] xfrm_find_acq_byseq+0x3/0x24
> [<c061ffca>] _spin_unlock_irqrestore+0xa/0xc
> [<c044f69e>] setup_irq+0x138/0x1aa
> [<c05b55b8>] pci_conf1_read+0xa4/0xac
> [<c05829bf>] yenta_probe_handler+0x0/0x34
> [<c044f78c>] request_irq+0x7c/0x98
> [<c05817cd>] yenta_probe_cb_irq+0x38/0xd9
> [<c0581e03>] ti12xx_override+0x3c4/0x52d
> [<c05826f2>] yenta_probe+0x320/0x5d7
> [<c04f5445>] pci_device_probe+0x36/0x57
> [<c05585f6>] really_probe+0x7f/0x103
> [<c05586be>] driver_probe_device+0x44/0xa5
> [<c05587ad>] __driver_attach+0x0/0xab
> [<c0558820>] __driver_attach+0x73/0xab
> [<c0557c48>] bus_for_each_dev+0x37/0x59
> [<c05584b0>] driver_attach+0x16/0x18
> [<c05587ad>] __driver_attach+0x0/0xab
> [<c0557f19>] bus_add_driver+0x61/0x165
> [<c04f55a1>] __pci_register_driver+0x73/0x9f
> [<c0400565>] init+0x1c1/0x36a
> [<c0403e3a>] ret_from_fork+0x6/0x1c
> [<c04003a4>] init+0x0/0x36a
> [<c04003a4>] init+0x0/0x36a
> [<c0404b33>] kernel_thread_helper+0x7/0x10
> =======================
>handlers:
>[<c05829bf>] (yenta_probe_handler+0x0/0x34)
>Disabling IRQ #10
>irq 11: nobody cared (try booting with the "irqpoll" option)
> [<c044f976>] __report_bad_irq+0x36/0x7d
> [<c044fb57>] note_interrupt+0x19a/0x1d7
> [<c044f0ed>] handle_IRQ_event+0x1a/0x3f
> [<c045045c>] handle_level_irq+0xa7/0xdf
> [<c04503b5>] handle_level_irq+0x0/0xdf
> [<c04062be>] do_IRQ+0xb5/0xdb
> [<c0422b39>] run_rebalance_domains+0x116/0x33e
> [<c04048f3>] common_interrupt+0x23/0x28
> [<c042b8ff>] __do_softirq+0x54/0xba
> [<c04061b1>] do_softirq+0x59/0xb1
> [<c04503b5>] handle_level_irq+0x0/0xdf
> [<c04062cf>] do_IRQ+0xc6/0xdb
> [<c04048f3>] common_interrupt+0x23/0x28
> [<c061e951>] __sched_text_start+0x999/0xa21
> [<c0420b0d>] task_rq_lock+0x31/0x58
> [<c061f2db>] mutex_lock+0x1a/0x29
> [<c0448da8>] cpuset_cpus_allowed+0x3f/0x4b
> [<c045bab2>] pdflush+0x0/0x1a0
> [<c045bb60>] pdflush+0xae/0x1a0
> [<c045b77d>] wb_kupdate+0x0/0xde
> [<c04377c7>] kthread+0xb0/0xd9
> [<c0437717>] kthread+0x0/0xd9
> [<c0404b33>] kernel_thread_helper+0x7/0x10
> =======================
>handlers:
>[<c058231e>] (yenta_interrupt+0x0/0xb4)
>Disabling IRQ #11
>Yenta TI: socket 0000:00:02.1 probing PCI interrupt failed, trying to fix
>Yenta TI: socket 0000:00:02.1 no PCI interrupts. Fish. Please report.
>Yenta: no PCI IRQ, CardBus support disabled for this socket.
>Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
>Yenta: ISA IRQ mask 0x00b8, PCI irq 0
>Socket status: 30000006
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:MOU0] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S3 S4 S5)
>Time: acpi_pm clocksource has been installed.
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>pccard: PCMCIA card inserted into slot 0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x00004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>SCSI subsystem initialized
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>IBM TrackPoint firmware: 0x0b, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1176284986.230:2): selinux=0 auid=4294967295
>hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>pnp: Device 00:04 activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
>piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
>piix4_smbus: probe of 0000:00:07.3 failed with error -1
>NET: Registered protocol family 23
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>pnp: Device 00:05 activated.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: Differential serial interface
>input: PC Speaker as /class/input/input3
>cs46xx: failure waiting for FIFO command to complete
>gameport: CS46xx Gameport is pci0000:00:06.0/gameport0, speed 1754kHz
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
>cs: memory probe 0x60000000-0x60ffffff: clean.
>pcmcia: registering new device pcmcia0.0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>eth0: Hardware identity 0001:0001:0004:0000
>eth0: Station identity  001f:0001:0006:0004
>eth0: Firmware determined as Lucent/Agere 6.04
>eth0: Ad-hoc demo mode supported
>eth0: WEP supported, 104-bit key
>eth0: MAC address 00:01:F4:EC:EE:A8
>eth0: Station name "HERMES I"
>eth0: ready
>eth0: orinoco_cs at 0.0, irq 3, io 0x0100-0x013f
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: ACPI Dock Station Driver 
>ibm_acpi: IBM ThinkPad ACPI Extras v0.13
>ibm_acpi: http://ibm-acpi.sf.net/
>ibm_acpi: hotkey device not present
>ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 524280k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:524280k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (2046 buckets, 16368 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1

Actions: View

Attachments on bug 235649: 152513 | 152590