Attachment 152623 Details for Bug 236470 – entire dmesg output

entire dmesg output

dmesg (text/plain), 27.68 KB, created by Srikanth N on 2007-04-14 18:57:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Srikanth N

Created: 2007-04-14 18:57:39 UTC

Size: 27.68 KB

patch

obsolete

>Linux version 2.6.20-1.2944.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Apr 10 18:46:45 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 0000000036dcc000 end: 0000000036ecc000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000036ecc000 size: 00000000000af000 end: 0000000036f7b000 type: 4
>copy_e820_map() start: 0000000036f7b000 size: 0000000000e16000 end: 0000000037d91000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000037d91000 size: 0000000000008000 end: 0000000037d99000 type: 2
>copy_e820_map() start: 0000000037d99000 size: 0000000000095000 end: 0000000037e2e000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000037e2e000 size: 0000000000004000 end: 0000000037e32000 type: 2
>copy_e820_map() start: 0000000037e32000 size: 0000000000079000 end: 0000000037eab000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000037eab000 size: 0000000000044000 end: 0000000037eef000 type: 4
>copy_e820_map() start: 0000000037eef000 size: 0000000000008000 end: 0000000037ef7000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000037ef7000 size: 0000000000008000 end: 0000000037eff000 type: 3
>copy_e820_map() start: 0000000037eff000 size: 0000000000001000 end: 0000000037f00000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000036ecc000 (usable)
> BIOS-e820: 0000000036ecc000 - 0000000036f7b000 (ACPI NVS)
> BIOS-e820: 0000000036f7b000 - 0000000037d91000 (usable)
> BIOS-e820: 0000000037d91000 - 0000000037d99000 (reserved)
> BIOS-e820: 0000000037d99000 - 0000000037e2e000 (usable)
> BIOS-e820: 0000000037e2e000 - 0000000037e32000 (reserved)
> BIOS-e820: 0000000037e32000 - 0000000037eab000 (usable)
> BIOS-e820: 0000000037eab000 - 0000000037eef000 (ACPI NVS)
> BIOS-e820: 0000000037eef000 - 0000000037ef7000 (usable)
> BIOS-e820: 0000000037ef7000 - 0000000037eff000 (ACPI data)
> BIOS-e820: 0000000037eff000 - 0000000037f00000 (usable)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>895MB LOWMEM available.
>found SMP MP-table at 000fe860
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 229120) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229120
>  HighMem    229120 ->   229120
>early_node_map[1] active PFN ranges
>    0:        0 ->   229120
>On node 0 totalpages: 229120
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2197 pages used for memmap
>  Normal zone: 222827 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v000 GATEWA                                ) @ 0x000fe020
>ACPI: RSDT (v001 GATEWA 06DT04B  0x000007da      0x01000013) @ 0x37efe038
>ACPI: FADT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x37efd000
>ACPI: MADT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x37ef8000
>ACPI: MCFG (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x37ef7000
>ACPI: DSDT (v001 GATEWA 06DT04B  0x000007da MSFT 0x01000013) @ 0x00000000
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 37f00000:c8080000)
>Detected 2667.099 MHz processor.
>Built 1 zonelists.  Total pages: 226883
>Kernel command line: ro root=LABEL=/ quiet vga=792
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 899000k/916480k available (2189k kernel code, 15660k reserved, 1159k data, 236k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf7f00000   ( 895 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623649 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc0623649   (2189 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5337.89 BogoMIPS (lpj=2668946)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ac000 soft=c078c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5332.93 BogoMIPS (lpj=2666466)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D  CPU 2.66GHz stepping 07
>Total of 2 processors activated (10670.82 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=1971
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>0000:00:14.1: trying to change BAR0 from 0000 to 01F0
>0000:00:14.1: trying to change BAR1 from 0000 to 03F4
>0000:00:14.1: trying to change BAR2 from 0000 to 0170
>0000:00:14.1: trying to change BAR3 from 0000 to 0374
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:05: ioport range 0x400-0x4cf could not be reserved
>pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: 60100000-601fffff
>  PREFETCH window: 40000000-5fffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 1000-1fff
>  MEM window: 60000000-600fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:14.4 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1518k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1176542094.828:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 93BB43D45D46D1B4
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 4608k, total 131072k
>vesafb: mode is 1024x768x24, linelength=3072, pages=55
>vesafb: protected mode interface info at c000:5652
>vesafb: pmi: set display start = c00c56c0, set palette = c00c56fa
>vesafb: pmi: ports = 2010 2016 2054 2038 203c 205c 2000 2004 20b0 20b2 20b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ATIIXP: IDE controller at PCI slot 0000:00:14.1
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
>ATIIXP: chipset revision 128
>ATIIXP: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD2000BB-00RDA0, ATA DISK drive
>hda: hw_config=600d
>hda: hw_config=600d
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: PHILIPS DVD8801, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63<6>hda: hw_config=600d
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 < hda5 hda6 > hda4
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Time: tsc clocksource has been installed.
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:00:13.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 17, io mem 0x60204000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>PCI: Enabling device 0000:00:13.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 17, io mem 0x60205000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>PCI: Enabling device 0000:00:13.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 17, io mem 0x60206000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_sil 0000:00:11.0: version 2.0
>ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>ata1: SATA max UDMA/100 cmd 0xF881C680 ctl 0xF881C68A bmdma 0xF881C600 irq 18
>ata2: SATA max UDMA/100 cmd 0xF881C6C0 ctl 0xF881C6CA bmdma 0xF881C608 irq 18
>scsi0 : sata_sil
>ata1: SATA link down (SStatus 0 SControl 310)
>scsi1 : sata_sil
>usb 2-1: new low speed USB device using ohci_hcd and address 2
>ata2: SATA link down (SStatus 0 SControl 310)
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>ata3: SATA max UDMA/100 cmd 0xF881E480 ctl 0xF881E48A bmdma 0xF881E400 irq 19
>ata4: SATA max UDMA/100 cmd 0xF881E4C0 ctl 0xF881E4CA bmdma 0xF881E408 irq 19
>scsi2 : sata_sil
>usb 2-1: configuration #1 chosen from 1 choice
>input: CHESEN PS2 to USB Converter as /class/input/input1
>input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-1
>input: CHESEN PS2 to USB Converter as /class/input/input2
>input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:13.1-1
>ata3: SATA link down (SStatus 0 SControl 310)
>scsi3 : sata_sil
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>usb 1-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-2
>ata4: SATA link down (SStatus 0 SControl 310)
>Initializing USB Mass Storage driver...
>usb 1-4: new full speed USB device using ohci_hcd and address 3
>usb 1-4: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi removable disk sda
>scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 4:0:0:1: Attached scsi removable disk sdb
>scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 4:0:0:2: Attached scsi removable disk sdc
>scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 4:0:0:3: Attached scsi removable disk sdd
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1176542108.510:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>sd 4:0:0:1: Attached scsi generic sg1 type 0
>sd 4:0:0:2: Attached scsi generic sg2 type 0
>sd 4:0:0:3: Attached scsi generic sg3 type 0
>8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
>8139cp 0000:02:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:02:02.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.28
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:02:02.0 to 64
>eth0: RealTek RTL8139 at 0xf8820000, 00:16:76:d6:3e:45, IRQ 21
>eth0:  Identified 8139 chip type 'RTL-8101'
>hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>loop: loaded (max 8 devices)
>EXT3 FS on hda5, internal journal
>fuse init (API version 7.8)
>Adding 1052216k swap on /dev/hda6.  Priority:-1 extents:1 across:1052216k
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (7160 buckets, 57280 max)
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>eth0: no IPv6 routers present
>fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
>[fglrx] Maximum main memory to use for locked dma buffers: 800 MBytes.
>[fglrx] module loaded - fglrx 8.34.8 [Feb 20 2007] on minor 0
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 20
>[fglrx] total      GART = 130023424
>[fglrx] free       GART = 114032640
>[fglrx] max single GART = 114032640
>[fglrx] total      LFB  = 134217728
>[fglrx] free       LFB  = 116002816
>[fglrx] max single LFB  = 116002816
>[fglrx] total      Inv  = 0
>[fglrx] free       Inv  = 0
>[fglrx] max single Inv  = 0
>[fglrx] total      TIM  = 0
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hda-intel: Invalid position buffer, using LPIB read method instead.
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>/dev/vmmon[4530]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[4530]: Module vmmon: initialized
>/dev/vmmon[4538]: Module vmmon: unloaded
>/dev/vmmon[5049]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[5049]: Module vmmon: initialized
>hdc: lost interrupt
>/dev/vmnet: open called by PID 5075 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>ppdev: user-space parallel port driver
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x1e timed out
>hdc: lost interrupt
>/dev/vmnet: open called by PID 7263 (vmware-vmx)
>device eth0 entered promiscuous mode
>audit(1176557594.210:3): dev=eth0 prom=256 old_prom=0 auid=4294967295
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>/dev/vmmon[7278]: host clock rate change request 0 -> 19
>/dev/vmmon[7278]: host clock rate change request 19 -> 83
>device eth0 left promiscuous mode
>audit(1176557611.165:4): dev=eth0 prom=0 old_prom=256 auid=4294967295
>bridge-eth0: disabled promiscuous mode
>/dev/vmnet: open called by PID 7278 (vmware-vmx)
>device eth0 entered promiscuous mode
>audit(1176557611.165:5): dev=eth0 prom=256 old_prom=0 auid=4294967295
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x1e timed out
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x1e timed out
>hdc: lost interrupt
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>/dev/vmmon[7278]: host clock rate change request 83 -> 1043
>/dev/vmmon[7278]: host clock rate change request 1043 -> 83
>device eth0 left promiscuous mode
>audit(1176561746.804:6): dev=eth0 prom=0 old_prom=256 auid=4294967295
>bridge-eth0: disabled promiscuous mode
>/dev/vmnet: open called by PID 7278 (vmware-vmx)
>device eth0 entered promiscuous mode
>audit(1176561746.805:7): dev=eth0 prom=256 old_prom=0 auid=4294967295
>bridge-eth0: enabled promiscuous mode
>/dev/vmnet: port on hub 0 successfully opened
>/dev/vmmon[7278]: host clock rate change request 83 -> 19
>device eth0 left promiscuous mode
>audit(1176561747.854:8): dev=eth0 prom=0 old_prom=256 auid=4294967295
>bridge-eth0: disabled promiscuous mode
>/dev/vmmon[7263]: host clock rate change request 19 -> 0
>vmmon: Had to deallocate locked 101436 pages from vm driver cbaaa000
>vmmon: Had to deallocate AWE 5227 pages from vm driver cbaaa000
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x3 timed out
>hdc: lost interrupt
>ide-cd: cmd 0x1e timed out
>hdc: lost interrupt

Actions: View

Attachments on bug 236470: 152623