Attachment 152660 Details for Bug 236298 – 2.6.20-CBE.info

2.6.20-CBE.info

2.6.20-CBE.info (text/plain), 7.81 KB, created by IBM Bug Proxy on 2007-04-16 03:30:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: IBM Bug Proxy

Created: 2007-04-16 03:30:49 UTC

Size: 7.81 KB

patch

obsolete

>[root@cell8 ~]# uname -a
>Linux cell8.ltc.austin.ibm.com 2.6.20-CBE #1 SMP Wed Mar 21 10:24:39 CET 2007 ppc64 ppc64 ppc64 GNU/Linux
>
>
>[root@cell8 ~]# ethtool eth0
>Settings for eth0:
>        Supported ports: [ FIBRE ]
>        Supported link modes:   1000baseT/Full
>        Supports auto-negotiation: No
>        Advertised link modes:  1000baseT/Full
>        Advertised auto-negotiation: No
>        Speed: 1000Mb/s
>        Duplex: Full
>        Port: FIBRE
>        PHYAD: 0
>        Transceiver: internal
>        Auto-negotiation: off
>        Supports Wake-on: d
>        Wake-on: d
>        Current message level: 0x00007fff (32767)
>
>
>[root@cell8 ~]# ethtool eth1
>Settings for eth1:
>        Supported ports: [ FIBRE ]
>        Supported link modes:   1000baseT/Full
>        Supports auto-negotiation: No
>        Advertised link modes:  1000baseT/Full
>        Advertised auto-negotiation: No
>        Speed: 1000Mb/s
>        Duplex: Full
>        Port: FIBRE
>        PHYAD: 0
>        Transceiver: internal
>        Auto-negotiation: off
>        Supports Wake-on: d
>        Wake-on: d
>        Current message level: 0x00007fff (32767)
>
>
>[root@cell8 ~]# lsmod
>Module                  Size  Used by
>autofs4                31336  2
>binfmt_misc            15308  1
>spufs                  94448  1
>dm_multipath           26192  0
>dm_snapshot            24688  0
>dm_zero                 3568  0
>dm_mirror              29752  0
>dm_mod                 82112  10 dm_multipath,dm_snapshot,dm_zero,dm_mirror
>ehci_hcd               41492  0
>ohci_hcd               30556  0
>usbcore               170888  3 ehci_hcd,ohci_hcd
>[root@cell8 ~]# dmesg
>Using Cell machine description
>Page orders: linear mapping = 24, virtual = 12, io = 12
>Found initrd at 0xc000000001b00000:0xc000000001eee000
>Starting Linux PPC64 #1 SMP Wed Mar 21 10:24:39 CET 2007
>-----------------------------------------------------
>ppc64_pft_size                = 0x0
>physicalMemorySize            = 0x40000000
>ppc64_caches.dcache_line_size = 0x80
>ppc64_caches.icache_line_size = 0x80
>htab_address                  = 0xc00000003f000000
>htab_hash_mask                = 0x1ffff
>-----------------------------------------------------
>Linux version 2.6.20-CBE (root@blade.bsc.es) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed Mar 21 10:24:39 CET 2007
>*** 0000 : CF000012
>
>*** 0000 : Setup Arch
>[boot]0012 Setup Arch
>Entering add_active_range(0, 0, 8192) 0 entries of 256 used
>Entering add_active_range(1, 8192, 16384) 1 entries of 256 used
>Node 0 Memory: 0x0-0x20000000
>Node 1 Memory: 0x20000000-0x40000000
>no ISA ranges or unexpected isa range size,mapping 64k
>mmio NVRAM, 1024k at 0x2401fb00000 mapped to d000080080060000
>Zone PFN ranges:
>  DMA             0 ->    16384
>  Normal      16384 ->    16384
>early_node_map[2] active PFN ranges
>    0:        0 ->     8192
>    1:     8192 ->    16384
>On node 0 totalpages: 8192
>  DMA zone: 7 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 8185 pages, LIFO batch:0
>  Normal zone: 0 pages used for memmap
>On node 1 totalpages: 8192
>  DMA zone: 7 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 8185 pages, LIFO batch:0
>  Normal zone: 0 pages used for memmap
>*** 0000 : CF000015
>
>*** 0000 : Setup Done
>[boot]0015 Setup Done
>Built 2 zonelists.  Total pages: 16370
>Kernel command line: root=/dev/VolGroup00/LogVol00 ro console=hvc0 rhgb quiet xmon=on selinux=0
>IIC for CPU 0 target id 0xe : /interrupt-controller@20000508400
>IIC for CPU 1 target id 0xf : /interrupt-controller@20000508400
>IIC for CPU 2 target id 0x1e : /interrupt-controller@30000508400
>IIC for CPU 3 target id 0x1f : /interrupt-controller@30000508400
>spider_pic: node 0, addr: 0x24000008000 /interrupt-controller@24000008000
>spider_pic: node 1, addr: 0x34000008000 /interrupt-controller@34000008000
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time_init: decrementer frequency = 14.318000 MHz
>time_init: processor frequency   = 3200.000000 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 4, 1048576 bytes)
>Inode-cache hash table entries: 65536 (order: 3, 524288 bytes)
>freeing bootmem node 0
>freeing bootmem node 1
>Memory: 1018688k/1048576k available (4288k kernel code, 29888k reserved, 704k data, 493k bss, 320k init)
>Calibrating delay loop... 28.60 BogoMIPS (lpj=57216)
>Mount-cache hash table entries: 4096
>Processor 1 found.
>Processor 2 found.
>Processor 3 found.
>Brought up 4 CPUs
>Node 0 CPUs: 0-1
>Node 1 CPUs: 2-3
>migration_cost=7,3317
>NET: Registered protocol family 16
>iommu: disabled, direct DMA offset is 0x80000000
>PCI: Spider MMIO workaround for /pci@24004000000
>PCI: Probing PCI hardware
>mapping IO 24007000000 -> d000080000000000, size: 1000000
>get_bus_io_range(): unexpected region 0x1000000->0x1000000
>get_bus_io_range(): unexpected region 0x1000000->0x1000000
>PCI: Probing PCI hardware done
>SCSI subsystem initialized
>libata version 2.00 loaded.
>NET: Registered protocol family 2
>IP route cache hash table entries: 8192 (order: 0, 65536 bytes)
>TCP established hash table entries: 32768 (order: 3, 524288 bytes)
>TCP bind hash table entries: 16384 (order: 2, 262144 bytes)
>TCP: Hash tables configured (established 32768 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 4024k freed
>Total HugeTLB memory allocated, 0
>io scheduler noop registered
>io scheduler anticipatory registered (default)
>io scheduler deadline registered
>io scheduler cfq registered
>Generic RTC Driver v1.07
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
>RAMDISK driver initialized: 16 RAM disks of 131072K size 1024 blocksize
>loop: loaded (max 8 devices)
>NO SYSTEMSIM BOGUS DISK DETECTED
>Spidernet version 2.0 A (sdk).
>PHY ID: 2060c1, addr: 1
>Found BCM5461.
>Initialized device eth0.
>PHY ID: 2060c1, addr: 1
>Found BCM5461.
>Initialized device eth1.
>eth0: bogus network driver initialization
>No IRQ retreived
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SiI680: IDE controller at PCI slot 0000:00:0a.0
>SiI680: chipset revision 2
>SiI680: BASE CLOCK == 133
>SiI680: 100% native mode on irq 51
>    ide0: MMIO-DMA , BIOS settings: hda:pio, hdb:pio
>    ide1: MMIO-DMA , BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: FUJITSU MHT2040AS, ATA DISK drive
>ide0 at 0xd001080080af0080-0xd001080080af0087,0xd001080080af008a on irq 51
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>hda: max request size: 64KiB
>hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>Fusion MPT base driver 3.04.03
>Copyright (c) 1999-2007 LSI Logic Corporation
>Fusion MPT SAS Host driver 3.04.03
>mice: PS/2 mouse device common for all mice
>IPv4 over IPv4 tunneling driver
>TCP cubic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 10
>NET: Registered protocol family 17
>Freeing unused kernel memory: 320k freed
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Unable to find swap-space signature
>PHY ID: 2060c1, addr: 1
>eth0: link is down trying to bring it up
>PHY ID: 2060c1, addr: 1
>eth0: link is down trying to bring it up
>eth1: link is down trying to bring it up
>eth0: no IPv6 routers present
>eth1: link is down trying to bring it up
>eth1: no IPv6 routers present

Actions: View

Attachments on bug 236298: 152510 | 152660 | 152661 | 152662 | 153314 | 153385 | 153456 | 153747