Attachment 152687 Details for Bug 230860 – dmesg when hdc is omitted

dmesg when hdc is omitted

dmesg-screwy-raid (text/plain), 81.20 KB, created by Jack Tanner on 2007-04-16 14:23:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jack Tanner

Created: 2007-04-16 14:23:45 UTC

Size: 81.20 KB

patch

obsolete

>Linux version 2.6.20-1.2944.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Apr 10 18:46:45 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003fde0000 end: 000000003fee0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003fee0000 size: 0000000000003000 end: 000000003fee3000 type: 4
>copy_e820_map() start: 000000003fee3000 size: 000000000000d000 end: 000000003fef0000 type: 3
>copy_e820_map() start: 000000003fef0000 size: 0000000000010000 end: 000000003ff00000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fee0000 (usable)
> BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
> BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
> BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>126MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f3490
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261856) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261856
>early_node_map[1] active PFN ranges
>    0:        0 ->   261856
>On node 0 totalpages: 261856
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 317 pages used for memmap
>  HighMem zone: 32163 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 P4M80P                                ) @ 0x000f7620
>ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee3040
>ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee30c0
>ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fee8180
>ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3ff00000:bed00000)
>Detected 3074.059 MHz processor.
>Built 1 zonelists.  Total pages: 259299
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029036k/1047424k available (2189k kernel code, 17592k reserved, 1159k data, 236k init, 129920k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623649 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc0623649   (2189 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6152.23 BogoMIPS (lpj=3076116)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000651d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000651d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Celeron(R) CPU 3.06GHz stepping 09
>Total of 1 processors activated (6152.23 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf9f20, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:0f.0: cannot adjust BAR0 (not I/O)
>0000:00:0f.0: cannot adjust BAR1 (not I/O)
>0000:00:0f.0: cannot adjust BAR2 (not I/O)
>0000:00:0f.0: cannot adjust BAR3 (not I/O)
>PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON
>PCI: MSI-K8T-Neo2Fir, soundcard on
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
>ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
>ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
>ACPI: PCI Interrupt Link [ALKD] (IRQs *23)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:02: ioport range 0x400-0x47f could not be reserved
>pnp: 00:02: ioport range 0x500-0x50f has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2132k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1176643659.716:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 93BB43D45D46D1B4
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Bypassing VIA 8237 APIC De-Assert Message
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Thermal Zone [THRM] (35 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA VT3314 chipset
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.0
>ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
>    ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: ST3160812A, ATA DISK drive
>hdb: WDC WD1600JB-22GVC0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: ST3160023A, ATA DISK drive
>hdd: DVD DC DQ60, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63<6>hda: hw_config=607b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3
>hdb: max request size: 512KiB
>hdb: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63<6>hdb: hw_config=6b00
>, UDMA(100)
>hdb: cache flushes supported
> hdb: unknown partition table
>hdc: max request size: 512KiB
>hdc: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63<6>hdc: hw_config=407b
>, UDMA(100)
>hdc: cache flushes supported
> hdc: unknown partition table
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 17, io base 0x0000c800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 17, io base 0x0000cc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 17, io mem 0xfa000000
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>usb 5-7: new high speed USB device using ehci_hcd and address 3
>usb 5-7: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-2: configuration #1 chosen from 1 choice
>audit(1176643667.026:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1629 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51313 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176643667.286:3): policy loaded auid=4294967295
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>hdd: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<6>hdd: hw_config=6900
>, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>usbcore: registered new interface driver hci_usb
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
>eth0: VIA Rhine II at 0xfa001000, 00:14:2a:d6:f7:b0, IRQ 18.
>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 20
>Audigy2 value: Special config.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>scsi 0:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>scsi 0:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>scsi 0:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>scsi 0:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>usb-storage: device scan complete
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:0:1: Attached scsi generic sg1 type 0
>scsi 0:0:0:2: Attached scsi generic sg2 type 0
>scsi 0:0:0:3: Attached scsi generic sg3 type 0
>sd 0:0:0:0: Attached scsi removable disk sda
>sd 0:0:0:1: Attached scsi removable disk sdb
>sd 0:0:0:2: Attached scsi removable disk sdc
>sd 0:0:0:3: Attached scsi removable disk sdd
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>md: md0 stopped.
>md: bind<hdb>
>md: raid1 personality registered for level 1
>raid1: raid set md0 active with 1 out of 2 mirrors
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>Adding 917496k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:917496k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8183 buckets, 65464 max)
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>audit(1176643695.290:4): avc:  denied  { read } for  pid=2509 comm="sendmail" name="md0" dev=tmpfs ino=8206 scontext=system_u:system_r:system_mail_t:s0 tcontext=system_u:object_r:fixed_disk_device_t:s0 tclass=blk_file
>audit(1176643695.291:5): avc:  denied  { read } for  pid=2509 comm="sendmail" name="mdstat" dev=proc ino=-268434896 scontext=system_u:system_r:system_mail_t:s0 tcontext=system_u:object_r:proc_mdstat_t:s0 tclass=file
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: reset high speed USB device using ehci_hcd and address 3
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 3
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 0:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 0:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 0:0:0:0: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 0:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>scsi 0:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 0:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 0:0:0:2: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 4
>usb 5-7: configuration #1 chosen from 1 choice
>scsi1 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 4
>usb-storage: waiting for device to settle before scanning
>scsi 1:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 1:0:0:0: Attached scsi removable disk sda
>sd 1:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 1:0:0:1: Attached scsi removable disk sdb
>sd 1:0:0:1: Attached scsi generic sg1 type 0
>scsi 1:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 1:0:0:2: Attached scsi removable disk sdc
>sd 1:0:0:2: Attached scsi generic sg2 type 0
>scsi 1:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 1:0:0:3: Attached scsi removable disk sdd
>sd 1:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>md: bind<hdc>
>RAID1 conf printout:
> --- wd:1 rd:2
> disk 0, wo:0, o:1, dev:hdb
> disk 1, wo:1, o:1, dev:hdc
>md: recovery of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for recovery.
>md: using 128k window, over a total of 156290816 blocks.
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>md: md0: recovery done.
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:hdb
> disk 1, wo:0, o:1, dev:hdc
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: reset high speed USB device using ehci_hcd and address 4
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 4
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 1:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 1:0:0:1: rejecting I/O to dead device
>scsi 1:0:0:1: rejecting I/O to dead device
>scsi 1:0:0:1: rejecting I/O to dead device
>scsi 1:0:0:1: rejecting I/O to dead device
>scsi 1:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 1:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 1:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 5
>usb 5-7: configuration #1 chosen from 1 choice
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 2:0:0:0: Attached scsi removable disk sda
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 2:0:0:1: Attached scsi removable disk sdb
>sd 2:0:0:1: Attached scsi generic sg1 type 0
>scsi 2:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 2:0:0:2: Attached scsi removable disk sdc
>sd 2:0:0:2: Attached scsi generic sg2 type 0
>scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 2:0:0:3: Attached scsi removable disk sdd
>sd 2:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: reset high speed USB device using ehci_hcd and address 5
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 5
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 2:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 2:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 2:0:0:3: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 2:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 2:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 2:0:0:2: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 2:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>scsi 2:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 2:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 2:0:0:0: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 6
>usb 5-7: configuration #1 chosen from 1 choice
>scsi3 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 6
>usb-storage: waiting for device to settle before scanning
>scsi 3:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 3:0:0:0: Attached scsi removable disk sda
>sd 3:0:0:0: Attached scsi generic sg0 type 0
>scsi 3:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 3:0:0:1: Attached scsi removable disk sdb
>sd 3:0:0:1: Attached scsi generic sg1 type 0
>scsi 3:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 3:0:0:2: Attached scsi removable disk sdc
>sd 3:0:0:2: Attached scsi generic sg2 type 0
>scsi 3:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 3:0:0:3: Attached scsi removable disk sdd
>sd 3:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: reset high speed USB device using ehci_hcd and address 6
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 6
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 3:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:2: rejecting I/O to dead device
>sdc : READ CAPACITY failed.
>sdc : status=0, message=00, host=1, driver=00 
>sdc : sense not available. 
>scsi 3:0:0:2: rejecting I/O to dead device
>sdc: Write Protect is off
>sdc: Mode Sense: 00 00 00 00
>sdc: assuming drive cache: write through
>scsi 3:0:0:2: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 3:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 3:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 3:0:0:1: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 3:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 3:0:0:3: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>scsi 3:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 3:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 3:0:0:3: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 7
>usb 5-7: configuration #1 chosen from 1 choice
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>scsi 4:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi removable disk sda
>sd 4:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 4:0:0:1: Attached scsi removable disk sdb
>sd 4:0:0:1: Attached scsi generic sg1 type 0
>scsi 4:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 4:0:0:2: Attached scsi removable disk sdc
>sd 4:0:0:2: Attached scsi generic sg2 type 0
>scsi 4:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 4:0:0:3: Attached scsi removable disk sdd
>sd 4:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 7
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 7
>scsi 4:0:0:1: rejecting I/O to dead device
>scsi 4:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 4:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 4:0:0:1: rejecting I/O to dead device
>scsi 4:0:0:1: rejecting I/O to dead device
>scsi 4:0:0:1: rejecting I/O to dead device
>scsi 4:0:0:1: rejecting I/O to dead device
>scsi 4:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 4:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 4:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 8
>usb 5-7: configuration #1 chosen from 1 choice
>scsi5 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 8
>usb-storage: waiting for device to settle before scanning
>scsi 5:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 5:0:0:0: Attached scsi removable disk sda
>sd 5:0:0:0: Attached scsi generic sg0 type 0
>scsi 5:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 5:0:0:1: Attached scsi removable disk sdb
>sd 5:0:0:1: Attached scsi generic sg1 type 0
>scsi 5:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 5:0:0:2: Attached scsi removable disk sdc
>sd 5:0:0:2: Attached scsi generic sg2 type 0
>scsi 5:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 5:0:0:3: Attached scsi removable disk sdd
>sd 5:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: reset high speed USB device using ehci_hcd and address 8
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 8
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 5:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 5:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 5:0:0:3: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 5:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>scsi 5:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 5:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 5:0:0:0: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 9
>usb 5-7: configuration #1 chosen from 1 choice
>scsi6 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 9
>usb-storage: waiting for device to settle before scanning
>scsi 6:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 6:0:0:0: Attached scsi removable disk sda
>sd 6:0:0:0: Attached scsi generic sg0 type 0
>scsi 6:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 6:0:0:1: Attached scsi removable disk sdb
>sd 6:0:0:1: Attached scsi generic sg1 type 0
>scsi 6:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 6:0:0:2: Attached scsi removable disk sdc
>sd 6:0:0:2: Attached scsi generic sg2 type 0
>scsi 6:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 6:0:0:3: Attached scsi removable disk sdd
>sd 6:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: reset high speed USB device using ehci_hcd and address 9
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 9
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 6:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 6:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 6:0:0:1: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 6:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>scsi 6:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 6:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 6:0:0:3: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 10
>usb 5-7: configuration #1 chosen from 1 choice
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 10
>usb-storage: waiting for device to settle before scanning
>scsi 7:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 7:0:0:0: Attached scsi removable disk sda
>sd 7:0:0:0: Attached scsi generic sg0 type 0
>scsi 7:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 7:0:0:1: Attached scsi removable disk sdb
>sd 7:0:0:1: Attached scsi generic sg1 type 0
>scsi 7:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 7:0:0:2: Attached scsi removable disk sdc
>sd 7:0:0:2: Attached scsi generic sg2 type 0
>scsi 7:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 7:0:0:3: Attached scsi removable disk sdd
>sd 7:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: reset high speed USB device using ehci_hcd and address 10
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 10
>scsi 7:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 7:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 7:0:0:3: rejecting I/O to dead device
>scsi 7:0:0:3: rejecting I/O to dead device
>scsi 7:0:0:3: rejecting I/O to dead device
>scsi 7:0:0:3: rejecting I/O to dead device
>scsi 7:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 7:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 7:0:0:3: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 7:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 7:0:0:1: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>scsi 7:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 7:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 7:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 11
>usb 5-7: configuration #1 chosen from 1 choice
>scsi8 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 11
>usb-storage: waiting for device to settle before scanning
>scsi 8:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 8:0:0:0: Attached scsi removable disk sda
>sd 8:0:0:0: Attached scsi generic sg0 type 0
>scsi 8:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 8:0:0:1: Attached scsi removable disk sdb
>sd 8:0:0:1: Attached scsi generic sg1 type 0
>scsi 8:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 8:0:0:2: Attached scsi removable disk sdc
>sd 8:0:0:2: Attached scsi generic sg2 type 0
>scsi 8:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 8:0:0:3: Attached scsi removable disk sdd
>sd 8:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: reset high speed USB device using ehci_hcd and address 11
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 11
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=7, driver=00 
>sdb : sense not available. 
>scsi 8:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 8:0:0:1: rejecting I/O to dead device
>scsi 8:0:0:1: rejecting I/O to dead device
>scsi 8:0:0:1: rejecting I/O to dead device
>scsi 8:0:0:1: rejecting I/O to dead device
>scsi 8:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 8:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 8:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 12
>usb 5-7: configuration #1 chosen from 1 choice
>scsi9 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 12
>usb-storage: waiting for device to settle before scanning
>scsi 9:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 9:0:0:0: Attached scsi removable disk sda
>sd 9:0:0:0: Attached scsi generic sg0 type 0
>scsi 9:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 9:0:0:1: Attached scsi removable disk sdb
>sd 9:0:0:1: Attached scsi generic sg1 type 0
>scsi 9:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 9:0:0:2: Attached scsi removable disk sdc
>sd 9:0:0:2: Attached scsi generic sg2 type 0
>scsi 9:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 9:0:0:3: Attached scsi removable disk sdd
>sd 9:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: reset high speed USB device using ehci_hcd and address 12
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 12
>scsi 9:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 9:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 9:0:0:3: rejecting I/O to dead device
>scsi 9:0:0:3: rejecting I/O to dead device
>scsi 9:0:0:3: rejecting I/O to dead device
>scsi 9:0:0:3: rejecting I/O to dead device
>scsi 9:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 9:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 9:0:0:3: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 13
>usb 5-7: configuration #1 chosen from 1 choice
>scsi10 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 13
>usb-storage: waiting for device to settle before scanning
>scsi 10:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 10:0:0:0: Attached scsi removable disk sda
>sd 10:0:0:0: Attached scsi generic sg0 type 0
>scsi 10:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 10:0:0:1: Attached scsi removable disk sdb
>sd 10:0:0:1: Attached scsi generic sg1 type 0
>scsi 10:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 10:0:0:2: Attached scsi removable disk sdc
>sd 10:0:0:2: Attached scsi generic sg2 type 0
>scsi 10:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 10:0:0:3: Attached scsi removable disk sdd
>sd 10:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: reset high speed USB device using ehci_hcd and address 13
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 13
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 10:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 10:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 10:0:0:3: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 10:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>scsi 10:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 10:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 10:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 14
>usb 5-7: configuration #1 chosen from 1 choice
>scsi11 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 14
>usb-storage: waiting for device to settle before scanning
>scsi 11:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 11:0:0:0: Attached scsi removable disk sda
>sd 11:0:0:0: Attached scsi generic sg0 type 0
>scsi 11:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 11:0:0:1: Attached scsi removable disk sdb
>sd 11:0:0:1: Attached scsi generic sg1 type 0
>scsi 11:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 11:0:0:2: Attached scsi removable disk sdc
>sd 11:0:0:2: Attached scsi generic sg2 type 0
>scsi 11:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 11:0:0:3: Attached scsi removable disk sdd
>sd 11:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 14
>usb 5-7: reset high speed USB device using ehci_hcd and address 14
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 14
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 11:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:3: rejecting I/O to dead device
>sdd : READ CAPACITY failed.
>sdd : status=0, message=00, host=1, driver=00 
>sdd : sense not available. 
>scsi 11:0:0:3: rejecting I/O to dead device
>sdd: Write Protect is off
>sdd: Mode Sense: 00 00 00 00
>sdd: assuming drive cache: write through
>scsi 11:0:0:3: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 11:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>scsi 11:0:0:1: rejecting I/O to dead device
>sdb : READ CAPACITY failed.
>sdb : status=0, message=00, host=1, driver=00 
>sdb : sense not available. 
>scsi 11:0:0:1: rejecting I/O to dead device
>sdb: Write Protect is off
>sdb: Mode Sense: 00 00 00 00
>sdb: assuming drive cache: write through
>scsi 11:0:0:1: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 15
>usb 5-7: configuration #1 chosen from 1 choice
>scsi12 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 15
>usb-storage: waiting for device to settle before scanning
>scsi 12:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 12:0:0:0: Attached scsi removable disk sda
>sd 12:0:0:0: Attached scsi generic sg0 type 0
>scsi 12:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 12:0:0:1: Attached scsi removable disk sdb
>sd 12:0:0:1: Attached scsi generic sg1 type 0
>scsi 12:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 12:0:0:2: Attached scsi removable disk sdc
>sd 12:0:0:2: Attached scsi generic sg2 type 0
>scsi 12:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 12:0:0:3: Attached scsi removable disk sdd
>sd 12:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: reset high speed USB device using ehci_hcd and address 15
>usb 5-7: device firmware changed
>usb 5-7: USB disconnect, address 15
>scsi 12:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 12:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 12:0:0:0: rejecting I/O to dead device
>scsi 12:0:0:0: rejecting I/O to dead device
>scsi 12:0:0:0: rejecting I/O to dead device
>scsi 12:0:0:0: rejecting I/O to dead device
>scsi 12:0:0:0: rejecting I/O to dead device
>sda : READ CAPACITY failed.
>sda : status=0, message=00, host=1, driver=00 
>sda : sense not available. 
>scsi 12:0:0:0: rejecting I/O to dead device
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: assuming drive cache: write through
>scsi 12:0:0:0: rejecting I/O to dead device
>usb 5-7: new high speed USB device using ehci_hcd and address 16
>usb 5-7: configuration #1 chosen from 1 choice
>scsi13 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 16
>usb-storage: waiting for device to settle before scanning
>scsi 13:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
>sd 13:0:0:0: Attached scsi removable disk sda
>sd 13:0:0:0: Attached scsi generic sg0 type 0
>scsi 13:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
>sd 13:0:0:1: Attached scsi removable disk sdb
>sd 13:0:0:1: Attached scsi generic sg1 type 0
>scsi 13:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
>sd 13:0:0:2: Attached scsi removable disk sdc
>sd 13:0:0:2: Attached scsi generic sg2 type 0
>scsi 13:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
>sd 13:0:0:3: Attached scsi removable disk sdd
>sd 13:0:0:3: Attached scsi generic sg3 type 0
>usb-storage: device scan complete
>usb 5-7: reset high speed USB device using ehci_hcd and address 16
>usb 5-7: reset high speed USB device using ehci_hcd and address 16
>usb 5-7: reset high speed USB device using ehci_hcd and address 16

Actions: View

Attachments on bug 230860: 151901 | 151902 | 152687