Attachment 152813 Details for Bug 236743 – hp compaq nx6320 sata disk fc6 dmesg

hp compaq nx6320 sata disk fc6 dmesg

dmesg.txt (text/plain), 28.04 KB, created by David Timms on 2007-04-17 14:58:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Timms

Created: 2007-04-17 14:58:01 UTC

Size: 28.04 KB

patch

obsolete

>Linux version 2.6.20-1.2933.fc6 (brewbuilder@hs20-bc2-4.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Mon Mar 19 11:38:26 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003f6d0000 end: 000000003f7d0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003f7d0000 size: 0000000000015600 end: 000000003f7e5600 type: 2
>copy_e820_map() start: 000000003f7e5600 size: 0000000000012a00 end: 000000003f7f8000 type: 4
>copy_e820_map() start: 000000003f7f8000 size: 0000000000008000 end: 000000003f800000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
>copy_e820_map() start: 00000000fed20000 size: 000000000007b000 end: 00000000fed9b000 type: 2
>copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000100000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
> BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
> BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260048) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260048
>early_node_map[1] active PFN ranges
>    0:        0 ->   260048
>On node 0 totalpages: 260048
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 299 pages used for memmap
>  HighMem zone: 30373 pages, LIFO batch:7
>DMI 2.4 present.
>Using APIC driver default
>ACPI: RSDP (v002 HP                                    ) @ 0x000f7f00
>ACPI: XSDT (v001 HP     30AA     0x27070620 HP   0x00000001) @ 0x3f7e57b4
>ACPI: FADT (v004 HP     30AA     0x00000003 HP   0x00000001) @ 0x3f7e5684
>ACPI: MADT (v001 HP     30AA     0x00000001 HP   0x00000001) @ 0x3f7e5808
>ACPI: MCFG (v001 HP     30AA     0x00000001 HP   0x00000001) @ 0x3f7e5870
>ACPI: TCPA (v002 HP     30AA     0x00000001 HP   0x00000001) @ 0x3f7e58ac
>ACPI: SSDT (v001 HP       HPQSAT 0x00000001 MSFT 0x0100000e) @ 0x3f7f4e9c
>ACPI: DSDT (v001 HP       nc6340 0x00010000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
>Detected 1828.818 MHz processor.
>Built 1 zonelists.  Total pages: 257509
>Kernel command line: ro root=LABEL=/1 quiet 2
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07aa000 soft=c078a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022552k/1040192k available (2188k kernel code, 16892k reserved, 1157k data, 236k init, 122688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074a000 - 0xc0785000   ( 236 kB)
>      .data : 0xc0623031 - 0xc0744494   (1157 kB)
>      .text : 0xc0400000 - 0xc0623031   (2188 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3660.18 BogoMIPS (lpj=1830090)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ab000 soft=c078b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3657.01 BogoMIPS (lpj=1828507)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2400  @ 1.83GHz stepping 08
>Total of 2 processors activated (7317.19 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=76
>HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f8000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C002] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.C002] bus is 0
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C092._PRT]
>ACPI: Power Resource [C1E9] (on)
>ACPI: Power Resource [C1F6] (on)
>ACPI: Power Resource [C20F] (on)
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10E._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT]
>ACPI: Power Resource [C217] (off)
>ACPI: PCI Interrupt Link [C107] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C108] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C109] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C10A] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C123] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C124] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C125] (IRQs *10 11)
>ACPI Exception (pci_link-0180): AE_NOT_FOUND, Evaluating _PRS [20060707]
>ACPI: Power Resource [C311] (off)
>ACPI: Power Resource [C312] (off)
>ACPI: Power Resource [C313] (off)
>ACPI: Power Resource [C314] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0b: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:0b: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0b: ioport range 0x1200-0x121f has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: e8000000-e80fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-5fff
>  MEM window: e4000000-e7ffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 2000-3fff
>  MEM window: e0000000-e3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:06.0
>  IO window: 00007000-000070ff
>  IO window: 00007400-000074ff
>  PREFETCH window: 40000000-43ffffff
>  MEM window: 44000000-47ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 7000-7fff
>  MEM window: e8100000-e83fffff
>  PREFETCH window: 40000000-43ffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 17
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1483k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1176857378.931:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key A99AD4F3D245F54
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C315] to D3
>ACPI: Transitioning device [C315] to D3
>ACPI: Fan [C315] (off)
>ACPI: Transitioning device [C316] to D3
>ACPI: Transitioning device [C316] to D3
>ACPI: Fan [C316] (off)
>ACPI: Transitioning device [C317] to D3
>ACPI: Transitioning device [C317] to D3
>ACPI: Fan [C317] (off)
>ACPI: Transitioning device [C318] to D3
>ACPI: Transitioning device [C318] to D3
>ACPI: Fan [C318] (off)
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ0] (50 C)
>ACPI: Thermal Zone [TZ1] (43 C)
>ACPI: Thermal Zone [TZ2] (43 C)
>ACPI: Thermal Zone [TZ3] (30 C)
>ACPI: Thermal Zone [TZ4] (40 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x60a0-0x60a7, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:06.0, mfunc 0x01a61b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
>cs: IO port probe 0x7000-0x7fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:C20C,PNP0f13:C20D] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Time: tsc clocksource has been installed.
>synaptics reset failed
>synaptics reset failed
>synaptics reset failed
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006020
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006040
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00006060
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006080
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe8584000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ahci 0000:00:1f.2: version 2.0
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 21
>usb 1-1: device not accepting address 2, error -71
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 3 ports detected
>usb 5-1.2: new full speed USB device using ehci_hcd and address 3
>usb 5-1.2: device descriptor read/64, error -32
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xF8836100 ctl 0x0 bmdma 0x0 irq 220
>ata2: SATA max UDMA/133 cmd 0xF8836180 ctl 0x0 bmdma 0x0 irq 220
>ata3: SATA max UDMA/133 cmd 0xF8836200 ctl 0x0 bmdma 0x0 irq 220
>ata4: SATA max UDMA/133 cmd 0xF8836280 ctl 0x0 bmdma 0x0 irq 220
>scsi0 : ahci
>usb 5-1.2: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7, max UDMA/100, 117231408 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060B 892C PQ: 0 ANSI: 5
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
>sd 0:0:0:0: Attached scsi disk sda
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1176857386.350:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1629 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51313 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda6, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176857386.714:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input3
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:02:06.2[B] -> GSI 19 (level, low) -> IRQ 18
>intel_rng: FWH not detected
>tg3.c:v3.72 (January 8, 2007)
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
>Floppy drive(s): fd0 is 1.44M
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:30:02:76
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>ieee1394: Initialized config rom entry `ip1394'
>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 18
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18]  MMIO=[e8101000-e81017ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:02:06.3[C] -> GSI 22 (level, low) -> IRQ 22
>sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
>mmc0: SDHCI at 0xe8109000 irq 22 PIO
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>audit(1176821392.800:4): avc:  denied  { read } for  pid=1628 comm="pam_console_app" name="media" dev=sda6 ino=323953 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=user_u:object_r:default_context_t:s0 tclass=file
>audit(1176821392.800:5): avc:  denied  { read } for  pid=1628 comm="pam_console_app" name="media" dev=sda6 ino=323953 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c1023 tcontext=user_u:object_r:default_context_t:s0 tclass=file
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [C1B3] (on-line)
>ACPI: Battery Slot [C1B5] (battery present)
>ACPI: Battery Slot [C1B4] (battery absent)
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [C235]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [C22E]
>No dock devices found.
>ibm_acpi: ec object not found
>ACPI: Video Device [C07F] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda8, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda8, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda9, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda9, type ext3), uses xattr
>NTFS driver 2.1.28 [Flags: R/W MODULE].
>NTFS volume version 3.1.
>NTFS-fs warning (device sda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
>NTFS-fs error (device sda1): load_system_files(): Volume has unsupported flags set.  Mounting read-only.  Run chkdsk and mount in Windows.
>SELinux: initialized (dev sda1, type ntfs), uses genfs_contexts
>SELinux: initialized (dev sda3, type vfat), uses genfs_contexts
>Adding 1574360k swap on /dev/sda7.  Priority:-1 extents:1 across:1574360k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>PM: Writing back config space on device 0000:02:0e.0 at offset b (was 3ed173b, writing 30aa103c)
>PM: Writing back config space on device 0000:02:0e.0 at offset 3 (was 0, writing 4010)
>PM: Writing back config space on device 0000:02:0e.0 at offset 2 (was 2000000, writing 2000003)
>PM: Writing back config space on device 0000:02:0e.0 at offset 1 (was 2b00000, writing 2b00006)
>PM: Writing back config space on device 0000:02:0e.0 at offset 0 (was 3ed173b, writing 169c14e4)
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2571]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2571]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2600 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>ppdev: user-space parallel port driver

Actions: View

Attachments on bug 236743: 152809 | 152811 | 152812 | 152813 | 152820 | 152821 | 152882 | 153071 | 153072 | 153073 | 153074 | 153845 | 153846