Attachment 152821 Details for Bug 236743 – hp compaq nx6320 sata disk f devel dmesg

hp compaq nx6320 sata disk f devel dmesg

dmesg.txt (text/plain), 16.00 KB, created by David Timms on 2007-04-17 15:24:49 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Timms

Created: 2007-04-17 15:24:49 UTC

Size: 16.00 KB

patch

obsolete

>-0xfbffffff has been reserved
><6>pnp: 00:0b: iomem range 0xfec00000-0xfec000ff could not be reserved
><6>pnp: 00:0b: iomem range 0xfed20000-0xfed3ffff could not be reserved
><6>pnp: 00:0b: iomem range 0xfed45000-0xfed8ffff could not be reserved
><6>pnp: 00:0c: iomem range 0xd2800-0xd3fff has been reserved
><6>pnp: 00:0c: iomem range 0xfeda0000-0xfedbffff could not be reserved
><6>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: disabled.
><6>  MEM window: e8000000-e80fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.2
><6>  IO window: 4000-5fff
><6>  MEM window: e4000000-e7ffffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: 2000-3fff
><6>  MEM window: e0000000-e3ffffff
><6>  PREFETCH window: disabled.
><4>PCI: Bus 3, cardbus bridge: 0000:02:06.0
><4>  IO window: 00007000-000070ff
><4>  IO window: 00007400-000074ff
><4>  PREFETCH window: 40000000-43ffffff
><4>  MEM window: 44000000-47ffffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: 7000-7fff
><6>  MEM window: e8100000-e83fffff
><6>  PREFETCH window: 40000000-43ffffff
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 18 (level, low) -> IRQ 17
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
><4>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
><4>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
><6>TCP: Hash tables configured (established 65536 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5639k freed
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1176858007.656:1): initialized
><4>highmem bounce pool size: 64 pages
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key 8ACA592A6A4A4311
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.2 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.2:pcie00]
><7>Allocate Port Service[0000:00:1c.2:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><4>ACPI: Transitioning device [C315] to D3
><4>ACPI: Transitioning device [C315] to D3
><6>ACPI: Fan [C315] (off)
><4>ACPI: Transitioning device [C316] to D3
><4>ACPI: Transitioning device [C316] to D3
><6>ACPI: Fan [C316] (off)
><4>ACPI: Transitioning device [C317] to D3
><4>ACPI: Transitioning device [C317] to D3
><6>ACPI: Fan [C317] (off)
><4>ACPI: Transitioning device [C318] to D3
><4>ACPI: Transitioning device [C318] to D3
><6>ACPI: Fan [C318] (off)
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>ACPI: Processor [CPU1] (supports 8 throttling states)
><6>ACPI: Thermal Zone [TZ0] (50 C)
><6>ACPI: Thermal Zone [TZ1] (44 C)
><6>ACPI: Thermal Zone [TZ2] (43 C)
><6>ACPI: Thermal Zone [TZ3] (30 C)
><6>ACPI: Thermal Zone [TZ4] (39 C)
><6>isapnp: Scanning for PnP cards...
><6>Switched to high resolution mode on CPU 1
><6>Switched to high resolution mode on CPU 0
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>agpgart: Detected an Intel 945GM Chipset.
><6>agpgart: Detected 7932K stolen memory.
><6>agpgart: AGP aperture is 256M @ 0xd0000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>Yenta: CardBus bridge found at 0000:02:06.0 [103c:30aa]
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:02:06.0, mfunc 0x01a61b22, devctl 0x64
><6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
><6>Socket status: 30000006
><6>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
><6>pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
><6>cs: IO port probe 0x7000-0x7fff: clean.
><6>pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
><6>pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:C20C,PNP0f13:C20D] at 0x60,0x64 irq 1,12
><6>i8042.c: Detected active multiplexing controller, rev 1.1.
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX0 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX1 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX2 port at 0x60,0x64 irq 12
><6>serio: i8042 AUX3 port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><4>  Magic number: 3:403:3
><6>Freeing unused kernel memory: 244k freed
><4>Write protecting the kernel read-only data: 826k
><3>synaptics reset failed
><3>synaptics reset failed
><3>synaptics reset failed
><6>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
><6>serio: Synaptics pass-through port at isa0060/serio4/input0
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input1
><6>input: AT Translated Set 2 keyboard as /class/input/input2
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:1d.7: debug port 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe8584000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 8 ports detected
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
><6>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006020
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 2 ports detected
><6>usb 1-1: new high speed USB device using ehci_hcd and address 2
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006040
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>hub 1-1:1.0: USB hub found
><6>hub 1-1:1.0: 3 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1d.2: irq 17, io base 0x00006060
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.3 to 64
><6>uhci_hcd 0000:00:1d.3: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006080
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb 1-1.2: new full speed USB device using ehci_hcd and address 3
><3>usb 1-1.2: device descriptor read/64, error -32
><6>usb 1-1.2: configuration #1 chosen from 1 choice
><6>ACPI: PCI Interrupt 0000:02:06.1[B] -> GSI 19 (level, low) -> IRQ 18
><5>fw_ohci: Added fw-ohci device 0000:02:06.1, OHCI version 1.10
><5>fw_core: created new fw device fw0 (0 config rom retries)
><6>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
><6>tg3.c:v3.75 (March 23, 2007)
><6>ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 16 (level, low) -> IRQ 16
><6>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:17:08:30:02:76
><6>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
><6>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
><7>libata version 2.20 loaded.
><7>ata_piix 0000:00:1f.1: version 2.10ac1
><6>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1f.1 to 64
><6>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000160a0 irq 14
><6>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x000160a8 irq 15
><6>scsi0 : ata_piix
><6>ata1.00: ATAPI, max MWDMA2
><6>ata1.00: configured for MWDMA2
><6>scsi1 : ata_piix
><7>ata2: port disabled. ignoring.
><5>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-840S  1.11 PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 0:0:0:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:1f.2: version 2.1
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xf88fe100 ctl 0x00000000 bmdma 0x00000000 irq 21
><6>ata4: SATA max UDMA/133 cmd 0xf88fe180 ctl 0x00000000 bmdma 0x00000000 irq 21
><6>ata5: SATA max UDMA/133 cmd 0xf88fe200 ctl 0x00000000 bmdma 0x00000000 irq 21
><6>ata6: SATA max UDMA/133 cmd 0xf88fe280 ctl 0x00000000 bmdma 0x00000000 irq 21
><6>scsi2 : ahci
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ATA-7: FUJITSU MHV2060BH, 892C, max UDMA/100
><6>ata3.00: 117231408 sectors, multi 16: LBA48 
><6>ata3.00: configured for UDMA/100
><6>scsi3 : ahci
><6>ata4: SATA link down (SStatus 0 SControl 0)
><6>scsi4 : ahci
><6>ata5: SATA link down (SStatus 0 SControl 0)
><6>scsi5 : ahci
><6>ata6: SATA link down (SStatus 0 SControl 0)
><5>scsi 2:0:0:0: Direct-Access     ATA      FUJITSU MHV2060B 892C PQ: 0 ANSI: 5
><5>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sda: 117231408 512-byte hdwr sectors (60022 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
><5>sd 2:0:0:0: Attached scsi disk sda
><6>ADDRCONF(NETDEV_UP): eth0: link is not ready
><6>tg3: eth0: Link is up at 100 Mbps, full duplex.
><6>tg3: eth0: Flow control is on for TX and on for RX.
><6>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
><7>eth0: no IPv6 routers present
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>security:  3 users, 6 roles, 1792 types, 76 bools, 1 sens, 1024 cats
><7>security:  60 classes, 64679 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1176858518.079:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  4712.000 MB/sec
><4>raid5: using function: pIII_sse (4712.000 MB/sec)
><4>raid6: int32x1    527 MB/s
><4>raid6: int32x2    582 MB/s
><4>raid6: int32x4    562 MB/s
><4>raid6: int32x8    574 MB/s
><4>raid6: mmxx1     1667 MB/s
><4>raid6: mmxx2     1824 MB/s
><4>raid6: sse1x1    1238 MB/s
><4>raid6: sse1x2    1691 MB/s
><4>raid6: sse2x1    1910 MB/s
><4>raid6: sse2x2    2144 MB/s
><4>raid6: using algorithm sse2x2 (2144 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><4>GFS2 (built Apr 16 2007 20:07:06) installed
><6>Lock_Nolock (built Apr 16 2007 20:07:21) installed
><6>JFS: nTxBlock = 7964, nTxLock = 63715
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1176858522.078:3): audit_pid=819 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16

Actions: View

Attachments on bug 236743: 152809 | 152811 | 152812 | 152813 | 152820 | 152821 | 152882 | 153071 | 153072 | 153073 | 153074 | 153845 | 153846