Attachment 152836 Details for Bug 236783 – dmesg output

dmesg output

dmesg.txt (text/plain), 28.63 KB, created by Adam Huffman on 2007-04-17 17:04:39 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Adam Huffman

Created: 2007-04-17 17:04:39 UTC

Size: 28.63 KB

patch

obsolete

>Linux version 2.6.20-1.3079.fc7 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20070403 (Red Hat 4.1.2-8)) #1 SMP Mon Apr 16 20:05:15 EDT 2007
>Command line: ro root=/dev/vg00/root rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f670000 (usable)
> BIOS-e820: 000000007f670000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521840) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F63B0, 0014 (r0 PTLTD )
>ACPI: RSDT 7F6764AD, 0048 (r1   Sony       N0 20060710 PTL         0)
>ACPI: FACP 7F67DDDE, 0084 (r2   Sony       N0 20060710 PTL        5A)
>ACPI: DSDT 7F677E33, 5FAB (r1   Sony       N0 20060710 PTL   100000E)
>ACPI: FACS 7F67EFC0, 0040
>ACPI: APIC 7F67DE62, 0068 (r1   Sony       N0 20060710 PTL        5A)
>ACPI: BOOT 7F67DFD8, 0028 (r1   Sony       N0 20060710 PTL         1)
>ACPI: MCFG 7F67DF02, 003C (r1   Sony       N0 20060710 PTL        5A)
>ACPI: TCPA 7F67DF3E, 0032 (r1   Sony       N0 20060710 PTL      5A52)
>ACPI: APIC 7F67DF70, 0068 (r1   Sony       N0 20060710 PTL         0)
>ACPI: SSDT 7F6776B1, 077E (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: SSDT 7F676EE6, 07CB (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: SSDT 7F6764F5, 04E2 (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f670000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521840) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f670000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521840
>On node 0 totalpages: 521743
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2365 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11123 pages used for memmap
>  DMA32 zone: 506621 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000dc000
>Nosave address range: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 508167
>Kernel command line: ro root=/dev/vg00/root rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2000.215 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2025284k/2087360k available (2465k kernel code, 61688k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 4003.87 BogoMIPS (lpj=2001939)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10417777
>Detected 10.417 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 14638.83 BogoMIPS (lpj=7319416)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=26
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #0a (-#0d) is hidden behind transparent bridge #09 (-#0a) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10) *5
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: d6000000-d7ffffff
>  PREFETCH window: d0000000-d1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: dc100000-dc1fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: 3000-3fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: d2000000-d3ffffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 4000-4fff
>  MEM window: da000000-dbffffff
>  PREFETCH window: d4000000-d5ffffff
>PCI: Bus 10, cardbus bridge: 0000:09:04.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: dc000000-dc0fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 20 (level, low) -> IRQ 20
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3749k freed
>Simple Boot Flag at 0x37 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1176831984.755:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 1B1335F4D8AAC8F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F676C73, 01EA (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: SSDT 7F6769D7, 0217 (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F676E5D, 0089 (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: SSDT 7F676BEE, 0085 (r1   Sony       N0 20060710 PTL  20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Time: acpi_pm clocksource has been installed.
>ACPI: Thermal Zone [ATF0] (59 C)
>ACPI: Thermal Zone [DTS0] (63 C)
>ACPI: Thermal Zone [DTS1] (60 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:09:04.0 [104d:81e6]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:09:04.0, mfunc 0x01a21b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 2-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc544000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011810 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011818 irq 15
>scsi0 : ata_piix
>ata1.00: ATAPI, max UDMA/33
>usb 5-4: new high speed USB device using ehci_hcd and address 2
>ata1.00: configured for UDMA/33
>scsi1 : ata_piix
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-832S  1.70 PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
>ata_piix 0000:00:1f.2: invalid MAP value 0
>usb 5-4: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata3: SATA max UDMA/133 cmd 0x00000000000118d0 ctl 0x00000000000118c6 bmdma 0x00000000000118b0 irq 22
>ata4: SATA max UDMA/133 cmd 0x00000000000118c8 ctl 0x00000000000118c2 bmdma 0x00000000000118b8 irq 22
>scsi2 : ata_piix
>ata3.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
>ata3.00: ATA-7: ST9100824AS, 3.14, max UDMA/133
>ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568
>ata3.00: configured for UDMA/133
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x00000000000118cf
>scsi 2:0:0:0: Direct-Access     ATA      ST9100824AS      3.14 PQ: 0 ANSI: 5
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 2:0:0:0: Attached scsi disk sda
>usb 5-6: new high speed USB device using ehci_hcd and address 4
>usb 5-6: configuration #1 chosen from 1 choice
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>usb 4-2: new full speed USB device using uhci_hcd and address 2
>usb 4-2: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi4 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 4:0:0:0: Direct-Access     Sony     USB   HS-CARD    4.52 PQ: 0 ANSI: 0
>sd 4:0:0:0: Attached scsi removable disk sdb
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 755334
>EXT3-fs: dm-0: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1176832004.015:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1792 types, 76 bools, 1 sens, 1024 cats
>security:  60 classes, 64679 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176832004.307:3): policy loaded auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>sd 4:0:0:0: Attached scsi generic sg2 type 0
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: PC Speaker as /class/input/input4
>intel_rng: FWH not detected
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>iTCO_vendor_support: vendor-support=0
>tpm_inf_pnp 00:07: Found TPM with ID IFX0102
>tpm_inf_pnp 00:07: TPM found: config base 0x2e, io base 0x1670, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
>SELinux: initialized (dev securityfs, type securityfs), not configured for labeling
>audit(1176828408.783:4): avc:  denied  { mount } for  pid=1200 comm="modprobe" name="/" dev=securityfs ino=6884 scontext=system_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=system_u:object_r:unlabeled_t:s0 tclass=filesystem
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>ACPI: PCI Interrupt 0000:09:04.1[B] -> GSI 21 (level, low) -> IRQ 21
>fw_ohci: Added fw-ohci device 0000:09:04.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:09:04.2[C] -> GSI 22 (level, low) -> IRQ 22
>iwlwifi: Intel(R) Wireless Link driver for Linux, 0.0.12k
>iwlwifi: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>iwlwifi: Detected Intel PRO/Wireless 3945ABG Network Connection
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>sky2 0000:07:00.0: v1.13 addr 0xd8000000 irq 18 Yukon-FE (0xb7) rev 1
>sky2 eth0: addr 00:13:a9:8c:3d:7c
>iwlwifi: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwlwifi: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Tunable channels: 13 802.11bg, 23 802.11a channels
>iwlwifi: XXXY start rate scale
>wmaster0: Selected rate control algorithm 'iwlwifi rate-scale'
>fw_core: created new fw device fw0 (0 config rom retries)
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>audit(1176828410.125:5): avc:  denied  { mount } for  pid=1607 comm="modprobe" name="kvm:" dev=kvmfs ino=7762 scontext=system_u:system_r:insmod_t:s0 tcontext=system_u:object_r:kvmfs_t:s0 tclass=filesystem
>kvm_intel: Unknown symbol gfn_to_memslot
>kvm_intel: Unknown symbol set_cr3
>kvm_intel: Unknown symbol segment_base
>kvm_intel: Unknown symbol kvm_get_msr_common
>kvm_intel: Unknown symbol kvm_mmu_free_some_pages
>kvm_intel: Unknown symbol load_msrs
>kvm_intel: Unknown symbol kvm_write_guest
>kvm_intel: Unknown symbol kvm_exit_arch
>kvm_intel: Unknown symbol emulate_instruction
>kvm_intel: Unknown symbol fx_init
>kvm_intel: Unknown symbol set_cr4
>kvm_intel: Unknown symbol lmsw
>kvm_intel: Unknown symbol kvm_hypercall
>kvm_intel: Unknown symbol kvm_init_arch
>kvm_intel: Unknown symbol set_cr0
>kvm_intel: Unknown symbol kvm_stat
>kvm_intel: Unknown symbol set_cr8
>kvm_intel: Unknown symbol kvm_read_guest
>kvm_intel: Unknown symbol kvm_set_msr_common
>kvm_intel: Unknown symbol save_msrs
>kvm_intel: Unknown symbol kvm_resched
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: ACPI Dock Station Driver 
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID0]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-5, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-4, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>Adding 2097144k swap on /dev/vg00/swap.  Priority:-1 extents:1 across:2097144k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>sky2 eth1: enabling interface
>sky2 eth1: ram buffer 4K
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>sky2 eth1: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>audit(1176828519.558:6): audit_pid=2659 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Bridge firewalling registered
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>virbr0: no IPv6 routers present

Actions: View

Attachments on bug 236783: 152836 | 152837