Attachment 152853 Details for Bug 235902 – Output of "dmesg"

Output of "dmesg"

dmesg.txt (text/plain), 14.45 KB, created by Peter van Egdom on 2007-04-17 20:44:10 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Peter van Egdom

Created: 2007-04-17 20:44:10 UTC

Size: 14.45 KB

patch

obsolete

>Linux version 2.6.19-1.2911.fc6 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Sat Feb 10 15:03:33 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131056) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131056
>  HighMem    131056 ->   131056
>early_node_map[1] active PFN ranges
>    0:        0 ->   131056
>On node 0 totalpages: 131056
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125969 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 AMI                                   ) @ 0x000fa3b0
>ACPI: RSDT (v001 AMIINT SiS645XX 0x00000010 MSFT 0x0100000b) @ 0x1fff0000
>ACPI: FADT (v002 AMIINT SiS645XX 0x00000011 MSFT 0x0100000b) @ 0x1fff0030
>ACPI: MADT (v001 AMIINT SiS645XX 0x00001000 MSFT 0x0100000b) @ 0x1fff00c0
>ACPI: DSDT (v001    SiS      645 0x00001000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 21, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
>Detected 2390.434 MHz processor.
>Built 1 zonelists.  Total pages: 130033
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07f6000 soft=c07d6000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 512272k/524224k available (2177k kernel code, 11440k reserved, 1109k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
>      .init : 0xc0795000 - 0xc07d1000   ( 240 kB)
>      .data : 0xc0620477 - 0xc07358f4   (1109 kB)
>      .text : 0xc0400000 - 0xc0620477   (2177 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4782.97 BogoMIPS (lpj=2391487)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febf3ff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04
>Total of 1 processors activated (4782.97 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=424 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=600 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=172 bytes
>sizeof(task_struct)=1376 bytes
>checking if image is initramfs... it is
>Freeing initrd memory: 2137k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdb21, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS961 that hid as a SIS503 (compatible=1)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dde00000-dfefffff
>  PREFETCH window: cdb00000-ddcfffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1176846295.646:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 74C30EE98C9153DB
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>ACPI: Thermal Zone [THRM] (10 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected SiS 650 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>SIS5513: chipset revision 208
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
>    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>hda: WDC WD1200BB-22CAA0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes not supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 400k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:02.2[D] -> GSI 20 (level, low) -> IRQ 16
>ohci_hcd 0000:00:02.2: OHCI Host Controller
>ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.2: irq 16, io mem 0xdfffe000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:02.3[A] -> GSI 23 (level, low) -> IRQ 17
>ohci_hcd 0000:00:02.3: OHCI Host Controller
>ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.3: irq 17, io mem 0xdffff000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>device-mapper: ioctl: 4.10.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech USB Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.2-1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1176846303.779:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1595 types, 173 bools, 1 sens, 1024 cats
>security:  59 classes, 50086 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176846304.020:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 18
>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
>0000:00:0b.0: 3Com PCI 3c905C Tornado at e08f6f80.
>gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xdc00, speed 1065kHz
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 19
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Sleep Button (CM) [SLPB]
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4095 buckets, 32760 max) - 232 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>eth0:  setting full-duplex.
>audit(1176839131.333:4): audit_pid=1790 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 235902: 152487 | 152852 | 152853 | 152966 | 152967 | 152968 | 152969 | 152986 | 153056 | 153057 | 154592 | 154608 | 155980 | 157394