Attachment 152965 Details for Bug 233030 – lspci -vvv output of RX300S2

lspci -vvv output of RX300S2

lspci.txt (text/plain), 27.83 KB, created by David Tonhofer on 2007-04-18 22:46:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Tonhofer

Created: 2007-04-18 22:46:52 UTC

Size: 27.83 KB

patch

obsolete

>00:00.0 Host bridge: Intel Corporation E7520 Memory Controller Hub (rev 0c)
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Capabilities: [40] Vendor Specific Information
>
>00:02.0 PCI bridge: Intel Corporation E7525/E7520/E7320 PCI Express Port A (rev 0c) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: de200000-de2fffff
>        Prefetchable memory behind bridge: 00000000de000000-00000000de000000
>        Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>                Address: fee00000  Data: 0000
>        Capabilities: [64] Express Root Port (Slot-) IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 2
>                Link: Latency L0s <4us, L1 unlimited
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>                Root: Correctable- Non-Fatal- Fatal- PME-
>        Capabilities: [100] Advanced Error Reporting
>
>00:04.0 PCI bridge: Intel Corporation E7525/E7520 PCI Express Port B (rev 0c) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: de300000-de3fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>                Address: fee00000  Data: 0000
>        Capabilities: [64] Express Root Port (Slot-) IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 4
>                Link: Latency L0s <4us, L1 unlimited
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>                Root: Correctable- Non-Fatal- Fatal- PME-
>        Capabilities: [100] Advanced Error Reporting
>
>00:05.0 PCI bridge: Intel Corporation E7520 PCI Express Port B1 (rev 0c) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: de400000-de4fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>                Address: fee00000  Data: 0000
>        Capabilities: [64] Express Root Port (Slot-) IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
>                Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 5
>                Link: Latency L0s <4us, L1 unlimited
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x4
>                Root: Correctable- Non-Fatal- Fatal- PME-
>        Capabilities: [100] Advanced Error Reporting
>
>00:06.0 PCI bridge: Intel Corporation E7520 PCI Express Port C (rev 0c) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=00, secondary=06, subordinate=08, sec-latency=0
>        I/O behind bridge: 00003000-00003fff
>        Memory behind bridge: de500000-de6fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Message Signalled Interrupts: 64bit- Queue=0/1 Enable-
>                Address: fee00000  Data: 0000
>        Capabilities: [64] Express Root Port (Slot-) IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 6
>                Link: Latency L0s <4us, L1 unlimited
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>                Root: Correctable- Non-Fatal- Fatal- PME-
>        Capabilities: [100] Advanced Error Reporting
>
>00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 169
>        Region 4: I/O ports at 1000 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin B routed to IRQ 177
>        Region 4: I/O ports at 1400 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin C routed to IRQ 185
>        Region 4: I/O ports at 1800 [size=32]
>
>00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 169
>        Region 4: I/O ports at 1c00 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
>        Subsystem: Fujitsu Siemens Computer GmbH: Unknown device 101c
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin D routed to IRQ 193
>        Region 0: Memory at de100000 (32-bit, non-prefetchable) [size=1K]
>        Capabilities: [50] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [58] Debug port
>
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Bus: primary=00, secondary=09, subordinate=09, sec-latency=64
>        I/O behind bridge: 00004000-00004fff
>        Memory behind bridge: de700000-dfffffff
>        Prefetchable memory behind bridge: fff00000-000fffff
>        Secondary status: 66Mhz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
>        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0
>        Interrupt: pin A routed to IRQ 185
>        Region 0: I/O ports at <unassigned>
>        Region 1: I/O ports at <unassigned>
>        Region 2: I/O ports at <unassigned>
>        Region 3: I/O ports at <unassigned>
>        Region 4: I/O ports at 2400 [size=16]
>        Region 5: Memory at c2000000 (32-bit, non-prefetchable) [size=1K]
>
>00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Interrupt: pin B routed to IRQ 201
>        Region 4: I/O ports at 2000 [size=32]
>
>01:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (A-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: de200000-de2fffff
>        Prefetchable memory behind bridge: 00000000de000000-00000000de000000
>        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>                Link: Latency L0s unlimited, L1 unlimited
>                Link: ASPM Disabled CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>        Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [6c] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [d8] PCI-X bridge device.
>                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
>                Status: Bus=1 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>                : Upstream: Capacity=65535, Commitment Limit=65535
>                : Downstream: Capacity=65535, Commitment Limit=65535
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [300] Power Budgeting
>
>01:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor (B-Segment Bridge) (rev 07) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=01, secondary=03, subordinate=03, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: fff00000-000fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>                Link: Latency L0s unlimited, L1 unlimited
>                Link: ASPM Disabled CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>        Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [6c] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [d8] PCI-X bridge device.
>                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
>                Status: Bus=1 Dev=0 Func=2 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>                : Upstream: Capacity=65535, Commitment Limit=65535
>                : Downstream: Capacity=65535, Commitment Limit=65535
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [300] Power Budgeting
>
>02:0e.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 07)
>        Subsystem: Fujitsu Siemens Computer GmbH FSC MegaRAID PCI Express ROMB
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR+ FastB2B-
>        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 64 (32000ns min), Cache Line Size 10
>        Interrupt: pin A routed to IRQ 209
>        Region 0: Memory at de000000 (32-bit, prefetchable) [size=64K]
>        Region 2: Memory at de200000 (32-bit, non-prefetchable) [size=256K]
>        Capabilities: [c0] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [e0] PCI-X non-bridge device.
>                Command: DPERE- ERO- RBC=0 OST=3
>                Status: Bus=2 Dev=14 Func=0 64bit+ 133MHz+ SCD- USC-, DC=bridge, DMMRBC=1, DMOST=3, DMCRS=1, RSCEM-
>
>04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Interrupt: pin A routed to IRQ 169
>        Region 0: Memory at de300000 (64-bit, non-prefetchable) [size=64K]
>        Capabilities: [48] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>        Capabilities: [50] Vital Product Data
>        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
>                Address: 011e10aa10684e04  Data: 4b69
>        Capabilities: [d0] Express Endpoint IRQ 0
>                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>                Device: Latency L0s <4us, L1 unlimited
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
>                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
>                Link: Latency L0s <2us, L1 <64us
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x1
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [13c] Virtual Channel
>
>05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11)
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300 S2
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Interrupt: pin A routed to IRQ 169
>        Region 0: Memory at de400000 (64-bit, non-prefetchable) [size=64K]
>        Capabilities: [48] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
>        Capabilities: [50] Vital Product Data
>        Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
>                Address: 03439cee1c953704  Data: f6c2
>        Capabilities: [d0] Express Endpoint IRQ 0
>                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
>                Device: Latency L0s <4us, L1 unlimited
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0
>                Link: Latency L0s <2us, L1 <64us
>                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x1
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [13c] Virtual Channel
>
>06:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev 09) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Region 0: Memory at de500000 (64-bit, non-prefetchable) [size=4K]
>        Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
>        I/O behind bridge: 0000f000-00000fff
>        Memory behind bridge: fff00000-000fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>                Link: Latency L0s unlimited, L1 unlimited
>                Link: ASPM Disabled CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>        Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [6c] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [78] #0c [0009]
>        Capabilities: [d8] PCI-X bridge device.
>                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0
>                Status: Bus=6 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>                : Upstream: Capacity=65535, Commitment Limit=65535
>                : Downstream: Capacity=65535, Commitment Limit=65535
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [300] Power Budgeting
>
>06:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev 09) (prog-if 00 [Normal decode])
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 0, Cache Line Size 10
>        Bus: primary=06, secondary=08, subordinate=08, sec-latency=72
>        I/O behind bridge: 00003000-00003fff
>        Memory behind bridge: de600000-de6fffff
>        Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
>        Secondary status: 66Mhz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>        BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>        Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>                Device: Latency L0s <64ns, L1 <1us
>                Device: AtnBtn- AtnInd- PwrInd-
>                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported-
>                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>                Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>                Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>                Link: Latency L0s unlimited, L1 unlimited
>                Link: ASPM Disabled CommClk- ExtSynch-
>                Link: Speed 2.5Gb/s, Width x8
>        Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
>                Address: 0000000000000000  Data: 0000
>        Capabilities: [6c] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>        Capabilities: [d8] PCI-X bridge device.
>                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0
>                Status: Bus=6 Dev=0 Func=2 64bit- 133MHz- SCD- USC-, SCO-, SRD-
>                : Upstream: Capacity=65535, Commitment Limit=65535
>                : Downstream: Capacity=65535, Commitment Limit=65535
>        Capabilities: [100] Advanced Error Reporting
>        Capabilities: [300] Power Budgeting
>
>08:0b.0 SCSI storage controller: Adaptec AIC-7892A U160/m (rev 02)
>        Subsystem: Adaptec 29160 Ultra160 SCSI Controller
>        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B-
>        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 72 (10000ns min, 6250ns max), Cache Line Size 10
>        Interrupt: pin A routed to IRQ 217
>        BIST result: 00
>        Region 0: I/O ports at 3000 [disabled] [size=256]
>        Region 1: Memory at de600000 (64-bit, non-prefetchable) [size=4K]
>        Capabilities: [dc] Power Management version 2
>                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>09:05.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
>        Subsystem: Fujitsu Siemens Computer GmbH Primergy RX300
>        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
>        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>        Latency: 66 (2000ns min), Cache Line Size 10
>        Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
>        Region 1: I/O ports at 4000 [size=256]
>        Region 2: Memory at de700000 (32-bit, non-prefetchable) [size=4K]
>        Capabilities: [5c] Power Management version 2
>                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

Actions: View

Attachments on bug 233030: 152965